0445110435 Common Rail Injector Replacement for Fiat Iveco 504386427
New 0445110435 common rail injector (Bosch 0 445 110 435 reference, Fiat / Iveco OE 504386427) for Fiat Ducato and Iveco Daily IV light-commercial diesel. A Vidishi Auto compatible CRI2-16 replacement, solenoid drive, 12-month warranty. Single package 30 x 20 x 20 cm, 1.0 kg gross. MOQ 4 pcs. Wholesale export supply.
Original price was: $130.00.$65.00Current price is: $65.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| Weight | 1.0 kg |
|---|---|
| Dimensions | 30 × 20 × 20 cm |
| make | |
| model | |
| engine | Bosch Common Rail, Fiat Ducato / Iveco Daily IV (FPT F1AE0481 / F1AGL411) |
| position |
Product Details
0445110435 Common Rail Injector by the Numbers
Verified identity and fitment data for the complete light-commercial diesel injector, supplied for the Fiat Ducato to Iveco Daily range.
Every 0445110435 is a common rail injector and a solenoid injector in the light-commercial Bosch family; the diesel common-rail branch serves the Fiat Ducato to Iveco Daily engines. the Bosch common-rail reference 0 445 110 435 is shown for interchange only. This 0445110435 diesel injector carries that Bosch reference on the body, and the 0445110435 fuel injector listing covers the whole range, so a 0445110435 injector order is matched on the etched code first, never on the model name alone. In workshop terms a heavy duty diesel injector, a solenoid valve injector and a truck injector of this family are one and the same assembly, so the bench reference is what we quote against.
Engine Compatibility for 0445110435
This complete CRI2-16 injector runs the Bosch common rail system on Fiat Ducato and Iveco Daily (Daily IV) light-commercial diesels, plus FPT F1AE0481 and F1AGL411 industrial engines. Match the engine nameplate and the number on the old injector before ordering.
| Engine | Application | System | Matches |
|---|---|---|---|
| Fiat Ducato (FPT) | Light-commercial van, F1AE0481 / F1AGL411 | Bosch common rail | 0445110435 |
| Iveco Daily IV (FPT) | Light truck and van, F1AE0481 / F1AGL411 | Bosch common rail | 0445110435 |
| FPT F1AE3481D | Industrial and genset diesel | Bosch common rail | 0445110435 |
| FPT F1AE0481N | Euro 5 light-commercial diesel | Bosch common rail | 0445110435 |
| FPT F1AGL411M | MultiJet light-commercial diesel | Bosch common rail | 0445110435 |
About the 0445110435 Injector
What the complete light-commercial unit is, and how it sits in the Fiat / Iveco fuel system.
What is a common rail injector?
This is the solenoid unit that meters and atomises fuel from the rail into the combustion bowl. The 0445110435 is a complete unit in the light-commercial Bosch 0445 110 branch: the whole injector, not just a spray tip.
How does a common rail injector work?
The rail holds fuel at pressure and the ECU fires the solenoid, so the needle lifts for a controlled window. On a Fiat Ducato to Iveco Daily IV engine the valve opens, the spray forms, and the ECU trims each cylinder individually. A worn 0445110435 diesel injector shows up as a weak cone or a seeping seat long before it stops running.
Complete unit versus parts
The injector is the complete assembly; the internal valve group and seat sit inside it. The common rail injection system meters fuel through a common rail diesel injector on each cylinder, and a bosch common rail injector reference (0 445 110 435) is a light-commercial unit — the whole assembly, not bare injector parts. A diesel common-rail unit of this generation leaves the factory as one sealed unit, and a solenoid injector of this type is bench-checked as a whole; we supply it that way. Only a complete high pressure diesel injector assembly of this family is what the engine expects, and a partial repair is a different job.
Technical Specifications
Verified parameters for this CRI2-16 common rail injector, graded at the Fiat Ducato to Iveco Daily IV (FPT) platform level. Items the manufacturer does not publish are flagged, not guessed.
- Confirmed — multi-source verified fact
- Reference — interchange or class-level value; cross-check before relying on it
- Not published — the manufacturer does not publish it, and we never invent a number to fill the gap
| Parameter | Value | Data tier |
|---|---|---|
| Part number | 0445110435 (Bosch 0 445 110 435) | Confirmed |
| Fiat / Iveco OE number | 504386427 | Reference |
| Other OE interchanges | 2995476, 500061256, 71795154, 002003002218R | Reference |
| Bosch reference number | 0 445 110 435 | Reference |
| Reman interchange | 0 986 435 227 | Reference |
| Platform mark | Not published by the manufacturer | Not published |
| Injector family | Bosch 0445 110 (CRI2), CRI2-16 variant, solenoid | Confirmed |
| Drive type | Solenoid | Confirmed |
| Supplied brand | Vidishi Auto — new compatible replacement, not Bosch-branded | Confirmed |
| Injection system | Common Rail (CR) | Confirmed |
| Application engine | Fiat Ducato and Iveco Daily IV (FPT F1AE0481C/D/FA/GA/HA/N, F1AE3481D, F1AGL411D/M) light-commercial and industrial diesel, Bosch common rail | Confirmed |
| System pressure | 1600 bar class — platform-level figure, not a per-unit value | Reference |
| Condition | New | Confirmed |
| Warranty | 12 months against manufacturing defects | Confirmed |
| Single package size | 30 × 20 × 20 cm | Confirmed |
| Packaged shipping weight | 1.0 kg per unit — packaging and transport weight | Confirmed |
| Max injection pressure | Not published by the manufacturer | Not published |
| Emission standard | Not published (build-dependent) | Not published |
| Net weight (single injector) | Not published by the manufacturer | Not published |
| Flow rate (cc per minute or mg per stroke) | Not published by the manufacturer | Not published |
| Coil winding resistance (ohm) | Not published by the manufacturer | Not published |
| Per-unit opening pressure | Not published by the manufacturer | Not published |
| Injector correction code | Not published by the manufacturer | Not published |
The supplied unit is a complete CRI2-16 solenoid injector built to the Bosch 0 445 110 435 reference for the Fiat Ducato and Iveco Daily IV (FPT) platform. The Fiat / Iveco OE number 504386427, the reman interchange 0 986 435 227 and the other OE interchanges 2995476, 500061256, 71795154, 002003002218R are shown as Reference. The manufacturer does not publish a body marking or a per-unit pressure figure, so those are shown as Not published rather than estimated. Confirm the engine code plate and the etched 0445110435 code before fitting. Only the packaged shipping weight of 1.0 kg and the 30 × 20 × 20 cm single package size are stated as confirmed.
Cross-Reference & Interchanges
Need a 0445110435 cross reference or a 0445110435 equivalent? The interchange numbers below are the ones buyers match against. All are reference interchanges only.
Bosch 0 445 110 435 and Fiat / Iveco 504386427 are shown as reference interchanges only. The supplied unit is a Vidishi Auto compatible replacement, not a genuine Bosch or Fiat part, and the 0 986 435 227 reman number is listed for matching against rebuilt units.
Key Features
Why the 0445110435 CRI2-16 unit is built for Fiat Ducato and Iveco Daily IV service.
CRI2-16 solenoid injector
Part of the Bosch 0445 110 CRI2 branch in its CRI2-16 form, built for precise metering on Fiat and Iveco light-commercial diesels.
Complete unit, not a tip
The whole solenoid injector is supplied — a direct compatible replacement for the Bosch common-rail unit on the engine.
Built for duty cycle
Specified for stop-start delivery work across Ducato vans and Daily light trucks on the FPT F1AE0481 / F1AGL411 family.
New with 12-month cover
Supplied new as a Vidishi Auto compatible replacement, foam-packed and covered against manufacturing defects for 12 months.
Matched connector layout
Same plug and seal footprint as the Bosch 0 445 110 435 reference, so the swap needs no harness change.
Precise metering
Solenoid valve design for stable idle and clean combustion after a bench test, with an injector service kit available for seals and washers.
The diesel injector technology here is the light-commercial solenoid type, and the internal diesel injector parts and diesel fuel injector parts — valve group, seat and needle — are matched as one calibrated set. Every unit is a precision diesel injector built to the Bosch 0 445 110 435 specification, so the same part works across the Fiat Ducato and Iveco Daily IV range. Part numbers and service notes for the family sit under our maintenance guides.
Failure Symptoms
Common rail injector symptoms to watch for on a Fiat Ducato to Iveco Daily engine, and the checks that separate a tired unit from a healthy one.
| Symptom | What it usually means |
|---|---|
| injector leakage | An internal leak loses rail pressure between injections and can coke the tip. |
| injector misfire | A weak or seeping unit drops combustion quality on one cylinder at idle and under load. |
| injector failure | Long service wears the valve seat; the unit loses calibration before it stops. |
| black smoke diesel engine | Poor atomisation from a worn spray raises soot and exhaust opacity under load. |
| hard start injector | Low cranking compression on one cylinder or a leaking seat delays start-up. |
| injector fault code | An ECU cylinder-balance or circuit code points to one unit for a bench test. |
| weak spray pattern | A worn cone shows an uneven, narrow spray rather than a clean fan on the tester. |
Two measurements do most of the work: an injector return flow test, and a bench spray and seat-leak check. Bad injector symptoms and diesel injector symptoms rarely point to the injector alone — contamination past the filter, and a high-pressure fuel injection pump shedding debris, repeat the same damage, so fix the root cause as well as the unit. Some ECU generations store an injector coding value that must be written after replacement. If you are chasing a cylinder-balance code rather than a mechanical fault, start from the fault code library before pulling the unit.
How to replace common rail injector on a Fiat / Iveco engine
A bench-side walk-through of injector installation for the 0445110435, from a single injector replacement to a full bench test.
Confirm the code
Match the etched 0445110435 / 0 445 110 435 and the engine plate before removal.
Relieve pressure
Depressurise the common rail and isolate the battery before opening the fuel lines.
Remove and inspect
Unbolt the old unit, fit a fresh copper seal, and check the bore and seat for scoring or debris.
Fit to injector torque
Seat the new 0445110435 to the clamp torque spec with a clean seal; never reuse a washer or over-torque the clamp.
Purge and code
Bleed air from the fuel line and write the injector coding value if the ECU generation requires it.
Bench-test
Run the bench test on spray pattern, seat leak and return flow before refitting.
Use an injector removal tool and an injector tester to confirm spray and seat, and torque to the injector torque spec with a fresh copper washer. A common rail injector replacement on a Fiat / Iveco engine needs a clean high-pressure line and a new seal every time, and the injector installation is not finished until the correction value is written where the ECU requires it. Keep an injector service kit on the shelf for seals and washers. Part numbers and service notes for the family sit under our installation guides.
Warranty & Support
Every 0445110435 unit is covered against manufacturing defects, handled against the batch number on the box.
The 12-month cover runs from the ship date and is handled against the batch number recorded on the box, so a claim is quick to verify.
Contaminated fuel, water in the system, incorrect fitting, or a root fault elsewhere in the fuel system.
Send the batch number and a bench report to open a claim, and the full procedure sits on the Warranty Policy page.
Batch trace: each unit is logged by batch, so the cover is matched to the exact consignment it came from.
The bosch injector warranty reference is shown only as the Bosch interchange, not as a brand claim, and the cover is issued by us, not by Bosch or Fiat / Iveco. We are an independent supplier of compatible replacement parts. Returns and remittance follow our returns policy.
Wholesale & Bulk Supply
As a common rail injector supplier we ship to importers, workshops, fleets and injector rebuilders serving the Fiat / Iveco aftermarket. Send a wholesale RFQ and we reply with a per-unit or bulk quote, from a trial pack to a diesel injector bulk order.
Wholesale orders start at 4 pcs, and volume tiers are quoted on the same RFQ so you can trial a small pack before a full engine set.
Send the quantity and destination port and we return price, MOQ and lead time in one message, within 24 hours.
Sample batches and mixed SKU containers are quoted together, so a fleet can trial one family at a time.
As an injector distributor we provide export documentation, packing list and HS code with every consignment, plus a tracking reference.
We are an injector distributor of Vidishi Auto compatible parts; a bosch injector manufacturer reference is shown only as the Bosch interchange. For diesel injector wholesale or a diesel injector bulk order we act as your common rail injector supplier and reply with price, MOQ and lead time in one message. Programmes and pricing tiers are listed under wholesale pricing.
Shipping & Packing
Export packing and freight for single boxes through container volumes, quoted per order.
Express courier or air for single boxes and small batches, sea freight for container volumes, all with tracking.
Each unit ships in a 30 x 20 x 20 cm export box at 1.0 kg gross, foam-lined to protect the nozzle end.
Commercial invoice, packing list, HS code documentation and a tracking reference travel with every consignment.
Every injector export shipping consignment ships in a 30 x 20 x 20 cm box at 1.0 kg gross with full export documents, and order status is visible under track order. A diesel injector export order is quoted per order because lead time moves with quantity and freight mode; see shipping information for freight modes and rules.
Buyer Feedback
Field notes from workshops and fleets running the 0445110435 on Fiat Ducato to Iveco Daily engines.
Matched the old 0 445 110 435 on our Daily haulage fleet; smooth idle and clean combustion after a bench test. Compatible part, not an original Bosch unit — exactly what we needed for the price.
Two units replaced tired injectors on site tippers; rail pressure restored and smoke dropped. Every unit passed an injector quality check and a diesel injector test before dispatch, and we keep injector spare parts on the shelf for the next service.
Frequently Asked
Common questions about the 0445110435 common rail injector and ordering a compatible replacement.
Is 0445110435 genuine Bosch?
Can you run a 0445110435 fitment check before I order?
What are the 0445110435 applications — which engines fit it?
How does a common rail injector work?
What is the 0445110435 minimum order quantity?
Can a diesel injector be repaired?
What engines use the 0445110435 injector?
Is the 0445110435 a complete injector or a component?
What is the 0445110435 injection pressure?
What are the 0445110435 warranty terms?
How is the 0445110435 shipped?
Why buy a Vidishi Auto compatible 0445110435?
Need Help Matching?
Send the engine nameplate and the old injector photo; we confirm the 0445110435 match before you pay.
Fitment verification in three steps
- 1. Read the etched code. Photograph the number stamped on the injector body. Identification starts with that etched code, not with the box label, because boxes get swapped in the workshop.
- 2. Photograph the engine code plate. Send a clear shot of the engine code plate and the VIN so we can match the FPT engine family (F1AE0481 / F1AE3481D / F1AGL411) before any money moves.
- 3. Get written confirmation. We cross-check the Fiat / Iveco OE number 504386427 against your codes and reply with a written match confirmation before the order is invoiced.
Instant fitment check — wa.me/8613509025030
Formal quote — [email protected]
Warranty — cover, claims and exclusions for the 0445110435.
Shipping — packing, freight modes and return rules.
For diesel injector technical support and general injector support, send the engine nameplate and old injector photo; our team confirms the 0445110435 match on WhatsApp before you pay. Full contact routes sit on the contact page and the FAQ. We are an independent supplier of compatible replacement parts built to the Bosch 0 445 110 435 specification.
Reviews