VDS-OD720-PNEU-OIL-EXTR 70 L Pneumatic Waste Oil Extractor
VDS-OD720-PNEU-OIL-EXTR pneumatic oil extractor for Workshop and fleet service. Model OD720, 36 Months warranty, MOQ 2 pieces. Supplied under the Vidishi Auto brand.
Original price was: $230.00.$156.00Current price is: $156.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
At a glance
What this pneumatic oil extractor is
A 70 L pneumatic waste oil extractor with a 10 L tempered measuring cup, a 20 L catch pan on a height-adjustable rod, five evacuation wands and locking castors.
Part number match
The order reference for this item is VDS-OD720-PNEU-OIL-EXTR, built to model OD720.
Quote that model number on the order and the packing list so the correct
variant reaches the workshop.
Fitment verification
Suited to workshop and fleet oil changes. Connect a 6-8 bar air supply; the extractor is for engine oil only and must not be used on brake fluid, petrol, diesel or other flammable liquids.
Read the model plate or the part number stamped on the unit
being replaced before ordering.
Specifications
| Storage tank | 70 L, 1.5 mm reinforced steel |
|---|---|
| Measuring cup | 10 L tempered, graduated |
| Catch pan | 20 L, 41 cm diameter, adjustable to 1.5 m |
| Air supply | 6-8 bar, 150 L/min consumption |
| Vacuum | 0-65 cmHg negative pressure |
| Wands | 5 evacuation wands, mixed diameters |
| Model number | OD720 |
| Product type | Pneumatic Oil Extractor |
| Supplied brand | Vidishi Auto |
| Application | Workshop and fleet service |
| Material | Steel tank, tempered measuring cup |
| Condition | New |
| Warranty | 36 Months |
| Minimum order | 2 pieces |
| Quality system | ISO 9001 |
Specification rows describe the item supplied under the Vidishi Auto brand.
Fitment-relevant values must be confirmed against the unit being replaced.
What the workshop gets
Storage tank
70 L, 1.5 mm reinforced steel
Specification row 1 of 6.
Measuring cup
10 L tempered, graduated
Specification row 2 of 6.
Catch pan
20 L, 41 cm diameter, adjustable to 1.5 m
Specification row 3 of 6.
Air supply
6-8 bar, 150 L/min consumption
Specification row 4 of 6.
How it is used in the workshop
- Connect a 6-8 bar air supply and check the vacuum reading before opening the hose valve.
- Fit the wand that suits the drain port and insert it into the sump.
- Open the hose valve and let the measuring cup fill to the warning line.
- Drain the cup into the storage tank before it overflows.
- Close every valve before pressurising the tank for discharge.
the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and common mistakes
Air supply must be 6-8 bar; outside that range the extractor will not hold vacuum.
Engine oil only. Brake fluid, petrol, diesel, methanol and ketone are prohibited.
Working waste oil temperature is 40-60 °C; above 60 °C components can be damaged.
The tank safety valve releases above 1.0 bar during discharge.
This page lists what the documentation states; it does not extend any rating beyond it.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page before first use.
- Confirm the model number OD720 on the packing list matches the item received.
- Check the 6 specification rows that apply to your application before operating it.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Run the vacuum generator with the tank empty and confirm it holds pressure before the first vehicle. The working figures are 70 L, 1.5 mm reinforced steel and 5 evacuation wands, mixed diameters.
After each drain, close the cup valve, the discharge valve and the tank inlet before pressurising, and cut the air supply once the tank is empty.
Warranty cover runs for 36 Months from delivery on the supplied item.
Where this pneumatic oil extractor is used
Suited to workshop and fleet oil changes. Connect a 6-8 bar air supply; the extractor is for engine oil only and must not be used on brake fluid, petrol, diesel or other flammable liquids.
- General workshop
- Fleet service centre
- Truck maintenance bay
- Heavy equipment service
Fitment verification: Suited to workshop and fleet oil changes. Connect a 6-8 bar air supply; the extractor is for engine oil only and must not be used on brake fluid, petrol, diesel or other flammable liquids.
The application list is a guide. Confirm the model number on the
unit and the part number being replaced before ordering.
Quality and inspection
ISO 9001
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 36 Months warranty on the delivered item. The pneumatic oil extractor is built to model OD720 and packed against that model number.
Specification count
6 specification rows are published on this page for the pneumatic oil extractor, from storage tank to wands.
Anything the documentation does not state is not claimed for this item.
Wholesale and B2B supply
70 L pneumatic waste oil extractors with measuring cup, catch pan and five wands for workshops, fleets and truck service bays.
- Minimum order: 2 pieces
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total.
Pricing is quoted per order. This page carries no public price.
Choosing between options
| Vacuum extraction | suctions oil through a wand into the measuring cup for a visible result |
|---|---|
| Gravity catch pan | collects oil drained from above, needs the vehicle lifted |
| Manual hand pump | no compressed air needed, slower over a full service |
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
6 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frequently asked questions
Is the OD720 a genuine original equipment product?
No. It is supplied under the Vidishi Auto brand as a workshop tool built to the published specification on this page. Where a reference part number appears, it identifies the equipment being replaced, not an original-equipment product.
What does model OD720 cover?
A 70 L pneumatic waste oil extractor with a 10 L tempered measuring cup, a 20 L catch pan on a height-adjustable rod, five evacuation wands and locking castors. The published specification rows cover Steel tank, tempered measuring cup, and the stated warranty is 36 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Suited to workshop and fleet oil changes. Connect a 6-8 bar air supply; the extractor is for engine oil only and must not be used on brake fluid, petrol, diesel or other flammable liquids.
Do you supply this in wholesale quantities?
Yes. The minimum order is 2 pieces, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 36 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. The 6 published frames were photographed from this item, and the image list is published with the packing documentation.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Quote the VDS-OD720-PNEU-OIL-EXTR pneumatic oil extractor
Model OD720, MOQ 2 pieces, 36 Months warranty.
Wholesale, container and consolidated pricing on request.
How data on this page is labelled
Published
Values in the specification table are stated for this item and apply to the
batch supplied under the Vidishi Auto brand.
Confirm before order
Fitment, duty and pressure values must be confirmed against the equipment the
item will work on. Model numbers and stamped part numbers are the deciding
reference.
Not published
Packaged shipping weight and carton dimensions are not published for this item.
Request them with the order and they are supplied with the quotation.
Service and ordering information
Where to go next
Order checklist
- Model number: OD720
- Reference part number: VDS-OD720-PNEU-OIL-EXTR
- Minimum order: 2 pieces
- Warranty: 36 Months
- Brand: Vidishi Auto
Category
This item sits in the site’s Tools Accessories category, alongside the rest of the
workshop tool range.
Category: Tools Accessories. Model: OD720.
Support
Need this tool for a specific machine or vehicle? Send the model number or the
part number stamped on the unit you are replacing, and we return the matched item
with a delivered quotation.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Reviews