VDS-RD-3115-2014-00 Rotation Chuck Bushing 3115 2014 00
VDS-RD-3115-2014-00 rock drill chuck bushing for Atlas Copco. Model 3115 2014 00, 12 Months warranty, MOQ 1 piece. Supplied under the Vidishi Auto brand.
Original price was: $167.88.$124.39Current price is: $124.39.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| make | |
|---|---|
| model | |
| position |
Product Details
At a glance
What this rock drill chuck bushing is
A forged, quenched chuck bushing for the rotation gear-box of hydraulic rock drills, identified by part number 3115 2014 00 and supplied as a direct-replacement wear part.
Part number match
The order reference for this item is VDS-RD-3115-2014-00, built to model 3115 2014 00.
Quote that model number on the order and the packing list so the correct
variant reaches the workshop.
Fitment verification
Wear part for the rotation gear-box of hydraulic rock drills in the COP1838 family. Verify the part number stamped on the removed bushing against 3115 2014 00 before ordering; neighbouring COP-series machines use different part numbers.
Read the model plate or the part number stamped on the unit
being replaced before ordering.
Specifications
| Part number | 3115 2014 00 |
|---|---|
| Material | 40Cr forged alloy steel |
| Hardness | HRC 52-58 after quenching |
| Size | 150 x 150 x 200 mm envelope |
| Mass | 5 kg |
| Condition | 100% new replacement part |
| Model number | 3115 2014 00 |
| Product type | Rock Drill Chuck Bushing |
| Supplied brand | Vidishi Auto |
| Application | Atlas Copco |
| Material | 40Cr forged alloy steel, quenched |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 piece |
| Quality system | ISO 9001 |
| Reference part numbers | 3115 2014 00 |
| Cross-reference | Atlas Copco equipment identification only |
Specification rows describe the item supplied under the Vidishi Auto brand.
Fitment-relevant values must be confirmed against the unit being replaced.
What the workshop gets
Part number
3115 2014 00
Specification row 1 of 6.
Material
40Cr forged alloy steel
Specification row 2 of 6.
Hardness
HRC 52-58 after quenching
Specification row 3 of 6.
Size
150 x 150 x 200 mm envelope
Specification row 4 of 6.
How it is used in the workshop
- Isolate and depressurise the rock drill following the site procedure.
- Read the part number stamped on the removed bushing before ordering.
- Fit the replacement with clean, lightly oiled mating surfaces.
- Torque the retaining hardware to the manufacturer’s figure.
- Run a short test hole before returning the machine to production.
the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and common mistakes
Neighbouring COP-series machines use different part numbers in the same 3115 series; read the stamped number off the removed bushing before ordering.
Rock drilling service is abrasive: dust, vibration and shock load wear the bushing faster.
This is a wear part, not a catalogue-equality claim against the original equipment.
This page lists what the documentation states; it does not extend any rating beyond it.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page before first use.
- Confirm the model number 3115 2014 00 on the packing list matches the item received.
- Check the 6 specification rows that apply to your application before operating it.
- Isolate and depressurise the host machine before fitting any wear part.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Check the bore and the face of the new bushing against the removed part before fitting. The published figures are 3115 2014 00 and 100% new replacement part.
Run a short test hole before returning the machine to production, and log the running hours so the next change can be planned rather than guessed.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this rock drill chuck bushing is used
Wear part for the rotation gear-box of hydraulic rock drills in the COP1838 family. Verify the part number stamped on the removed bushing against 3115 2014 00 before ordering; neighbouring COP-series machines use different part numbers.
- COP1838
- COP1838HD
- COP1238
- COP1638
Fitment verification: Wear part for the rotation gear-box of hydraulic rock drills in the COP1838 family. Verify the part number stamped on the removed bushing against 3115 2014 00 before ordering; neighbouring COP-series machines use different part numbers.
The application list is a guide. Confirm the model number on the
unit and the part number being replaced before ordering.
Quality and inspection
ISO 9001
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The rock drill chuck bushing is built to model 3115 2014 00 and packed against that model number.
Specification count
6 specification rows are published on this page for the rock drill chuck bushing, from part number to condition.
Anything the documentation does not state is not claimed for this item.
Wholesale and B2B supply
Rock drill chuck bushings and rotation wear parts, supplied against the stamped part number for mining and quarry operators.
- Minimum order: 1 piece
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total.
Pricing is quoted per order. This page carries no public price.
Choosing between options
| Genuine bushings | original equipment supply at original equipment pricing |
|---|---|
| Forged replacement | priced for the aftermarket with a stated part number |
| Repair of the old bushing | possible only where the bore and face are within limits |
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
4 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frequently asked questions
Is the 3115 2014 00 a genuine Atlas Copco product?
No. It is supplied under the Vidishi Auto brand as a workshop tool built to the published specification on this page. Where a reference part number appears, it identifies the equipment being replaced, not an original-equipment product.
What does model 3115 2014 00 cover?
A forged, quenched chuck bushing for the rotation gear-box of hydraulic rock drills, identified by part number 3115 2014 00 and supplied as a direct-replacement wear part. The published specification rows cover 40Cr forged alloy steel, quenched, and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Wear part for the rotation gear-box of hydraulic rock drills in the COP1838 family. Verify the part number stamped on the removed bushing against 3115 2014 00 before ordering; neighbouring COP-series machines use different part numbers.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 piece, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. The 4 published frames were photographed from this item, and the image list is published with the packing documentation.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Quote the VDS-RD-3115-2014-00 rock drill chuck bushing
Model 3115 2014 00, MOQ 1 piece, 12 Months warranty.
Wholesale, container and consolidated pricing on request.
How data on this page is labelled
Published
Values in the specification table are stated for this item and apply to the
batch supplied under the Vidishi Auto brand.
Confirm before order
Fitment, duty and pressure values must be confirmed against the equipment the
item will work on. Model numbers and stamped part numbers are the deciding
reference.
Not published
Packaged shipping weight and carton dimensions are not published for this item.
Request them with the order and they are supplied with the quotation.
Service and ordering information
Where to go next
Order checklist
- Model number: 3115 2014 00
- Reference part number: 3115 2014 00
- Minimum order: 1 piece
- Warranty: 12 Months
- Brand: Vidishi Auto
Category
This item sits in the site’s Tools Accessories category, alongside the rest of the
workshop tool range.
Category: Tools Accessories. Model: 3115 2014 00.
Support
Need this tool for a specific machine or vehicle? Send the model number or the
part number stamped on the unit you are replacing, and we return the matched item
with a delivered quotation.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Reviews