7SBU16C AC Compressor A4572300111 for Mercedes-Benz Actros | 24V

How we label data. Confirmed values are read from supplied stock and published technical data; reference values are published cross references and are shown for identification only; anything not published is withheld rather than guessed.

A truck or bus air-conditioning compressor is the heart of the A/C loop: it compresses low-pressure refrigerant gas and pushes it through the condenser, receiver, expansion valve and evaporator. On the 24V Mercedes-Benz commercial platform, the 7SBU16C is the workhorse swash-plate compressor built for continuous duty in hot cab and passenger environments.

The A4572300111 compressor is the Mercedes Actros AC compressor and also serves Axor and Citaro buses as a 24V bus compressor. It is a Denso 7SBU16C design with a fixed swash plate and an internal electronic control valve that modulates displacement to match cooling demand. It runs on R134a and is lubricated with PAG / ND-8 oil, and the unit carries the Mercedes-Benz OE number A4572300111, which is the number to match against the tag on the old compressor.

Because the same Mercedes-Benz truck compressor family is fitted to several commercial models, the safest identification is the stamped number plus the vehicle VIN or engine code. We confirm the match in writing before quoting, so you only order what fits.

If you arrived here looking for “mercedes benz ac compressor”, “ac compressor mercedes benz”, you are in the right place: A4572300111 is stocked as a replacement 7SBU16C AC Compressor for Mercedes-Benz Actros / Axor / Citaro (MP2 / MP3).

Reference / cross-reference numbers are published listings and are shown for identification only; they are not claims of origin or authorization.

• A0002343711 — Mercedes-Benz OE cross number
• 0002343711 — Mercedes-Benz OE cross number (no prefix)
• 4572300711 — Mercedes-Benz OE family number
• 4471709142 — Lubricant for this unit: PAG / ND-8, approx. 175–180 ml — check it against the number stamped on your old part.
• 4472208701 — Electrical system is listed at 24V on this line.
• 4472208702 — Pulley for this unit: 9PK / PV9, 130 mm clutch — check it against the number stamped on your old part.

• Confirmed A4572300111 / 7SBU16C fitment for Mercedes-Benz commercial platforms.
• 24V heavy-duty winding built for truck and bus duty cycles.
• Internal electronic control valve for stable cabin temperature.
• 9PK 130 mm clutch matched to the original belt drive.
• Pulley is recorded as 9PK / PV9 · 130 mm for this reference.
• Mercedes-Benz Actros: Truck A/C — confirm by engine / VIN — match this against your vehicle before ordering.
• The Actros air conditioning compressor and Axor / Citaro variants share this 7SBU16C base.
• A dependable Mercedes truck AC compressor for fleet and bus operators.

• Weak or no cold air from the cab or bus A/C, even at idle.
• Brand is recorded as Mercedes-Benz · Vidishi Auto for this reference.
• Visible refrigerant oil leak at the compressor shaft seal or ports.
• Compressor clutch fails to engage, or cycles on and off rapidly.
• Burned or seized compressor accompanied by a blown A/C fuse.

• 1Control for this unit: Internal electronic control valve — check it against the number stamped on your old part.
• 2Disconnect the battery, then remove the drive belt and unplug the clutch and control-valve connectors.
• 3Unbolt the compressor, swap the old O-rings for new R134a-rated ones, and fit the new 7SBU16C unit.
• 4Evacuate the system to the correct vacuum, then charge R134a with PAG / ND-8 oil (~175–180 ml total system oil).
• 5Leak-test, verify clutch engagement and control-valve operation, then confirm cabin temperature.

• Mercedes-Benz truck A/C condensers
• Pulley belt type is listed at 9PK on this line.
• Confirmed on our own stock: OE number is A4572300111.
• Mounting for this unit: Direct OE replacement — check it against the number stamped on your old part.
• PAG / ND-8 compressor oil
• Other 7SBU / 7SEU truck compressors