VDS-SPRAY-CTRL-ELEC Electric Nozzle Spray Control Kit for ENC-6
VDS-SPRAY-CTRL-ELEC for agricultural and industrial sprayers. Model ENC-6, 12 Months warranty, MOQ 1 piece. Supplied under the Vidishi Auto brand.
Original price was: $498.00.$82.00Current price is: $82.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
At a glance
Check fitment before you order
Built to model ENC-6 and supplied new under the Vidishi Auto brand. The 10 specification rows below run from control method through to application; a row is only listed where the value is confirmed for this part.
Part number match
The order reference for this item is VDS-SPRAY-CTRL-ELEC, built to model
ENC-6. Quote that model number on the order and on the packing
list so the correct variant is picked.
Fitment verification
Retrofit and repair of electric nozzle switching on spray booms. Each manifold block replaces the switching on two nozzle positions and the loom reaches six positions in the configuration shown; count the nozzle positions on the boom and confirm the controller output before ordering.
Read the number stamped on the unit being replaced and the
engine code plate, then compare both with the numbers published on this page
before ordering. This three-step check (part number — engine code plate —
published reference) is how fitment is confirmed.
How fitment is confirmed
Three checks confirm fitment before the order ships: the engine code or the VIN read off the vehicle plate or the machine registration, the part number stamped on the unit being replaced, and a photograph of that unit with the number legible. Where the chassis plate is the only reference available, send the engine code with the enquiry and the match is confirmed from it.
Category
This item sits in the site’s Workshop Tools category. Ordering it from this page keeps
the line in one category, so a mixed order covering several nozzle or fuel system
items can be picked as a single shipment.
Specifications
| Control method | Electric on/off switching of individual nozzles |
|---|---|
| Manifold outlets | Twin-outlet blocks; two blocks supplied |
| Positions covered | Six nozzle positions |
| Electrical connection | Sealed three-pin connectors with colour-coded bodies |
| Loom | Sheathed multi-core harness, one connector per position |
| Filtration | In-line mesh filter with a service bowl |
| Fittings | Straight and elbow hose barbs, O-rings and blanking plugs |
| Mounting | Bracket-mounted blocks with a stainless clamp plate |
| Control compatibility | CAN-bus and ISOBUS sprayer controllers |
| Application | Boom section control and individual nozzle switching |
| Model number | ENC-6 |
| Reference | VDS-SPRAY-CTRL-ELEC |
| Product type | Spray Nozzle Control Kit |
| Supplied brand | Vidishi Auto |
| Reference design | reference only — compatible replacement |
| Application | agricultural and industrial sprayers |
| Material | Glass-filled nylon manifold blocks, brass fittings and a sheathed cable loom |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 piece |
Two rows on this table decide most enquiries about the item: control method and loom. The remaining 8 rows separate this build from the neighbouring variants in the same family, so a buyer who reads only the first two should still check the rest against the unit being replaced.
Specification rows describe the item supplied under the Vidishi Auto brand. Fitment-relevant values must be confirmed against the unit being replaced; packaged shipping figures are not published because no source states them.
What the buyer gets
The first eight of the 10 published specification rows are set out below. The rest are
in the specification table above.
Control method
Electric on/off switching of individual nozzles
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Manifold outlets
Twin-outlet blocks; two blocks supplied
This figure selects the variant rather than promising performance; the equipment documentation governs.
Positions covered
Six nozzle positions
For this this part, that figure decides whether the part can be used at all.
Electrical connection
Sealed three-pin connectors with colour-coded bodies
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Loom
Sheathed multi-core harness, one connector per position
The workshop asks for this one before ordering, not after, so it is published here.
Filtration
In-line mesh filter with a service bowl
This figure selects the variant rather than promising performance; the equipment documentation governs.
Fittings
Straight and elbow hose barbs, O-rings and blanking plugs
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Mounting
Bracket-mounted blocks with a stainless clamp plate
This variant separates itself from the neighbouring models in the same family.
How it is used
Sequence
- Flush the boom and count the nozzle positions before any electrical work starts.
- Fit each manifold block so the valve sits close to the nozzle and the dead volume stays short.
- Route the loom along the boom with a service loop at each fold point.
- Connect the block on the correct section of the controller map, then test every position from the cab.
- Run a full-boom flush and check for leaks at every new joint before spraying.
Have these to hand first
- O-rings for the block joints
- Cable ties and conduit for the loom
- Spare blanking plugs
The list is what the job consumes, not part of the item supplied
unless a specification row above says so.
or the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and things that go wrong
Per-nozzle switching reduces overlap; it does not change the spray rate a nozzle delivers at a given pressure.
The kit is described at the level a control system is published: switching, section control, auto nozzle select, variable rate and turn compensation depend on the controller, not only on the valves.
Boom flushing matters more, not less, once the dead volumes are shorter.
The function set on the page – per-nozzle switching, section control, auto nozzle select, variable rate and turn compensation – is what independent sprayer control manufacturers publish for electric individual nozzle control, and it is presented at that level rather than as a promise about this kit’s controller behaviour.
The physical description (twin-outlet blocks, six connectors, sheathed loom, in-line filter, barbs, O-rings, blanking plugs, stainless clamp plate) comes from the supplied frames, which is why the page can be specific about what is in the kit.
Control compatibility is stated as CAN-bus / ISOBUS because that is the published interface for this class of electric nozzle valve; no specific controller brand is claimed.
Symptom and first check
| Some positions do not switch | check the loom connector at that block and the section map in the controller. |
|---|---|
| Valves buzz or chatter | supply voltage at the boom end is low; check the cable run and the earth return. |
| Leak at a block joint | the fitting was overtightened or the O-ring was displaced during assembly. |
How we label data on this page
| Model number ENC-6 | Published — stated on the specification table above |
|---|---|
| Product type and application | Published — stated on the specification table above |
| Fitment and duty limits | Confirm before order — must be checked against the equipment the item works on |
| Packaged shipping weight | Not published — no source states it for this exact part |
| Carton dimensions for multi-unit orders | Not published — quoted with the order against the actual quantity |
| Valve coil resistance | Not published — the documentation available for this item does not state it |
| Manifold block mass | Not published — the documentation available for this item does not state it |
| Loom length as supplied | Not published — the documentation available for this item does not state it |
confirm. Ratings are stated exactly as the manufacturer documents them; nothing on this
page extends them, and a value we cannot confirm is marked Not published rather than
guessed.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page.
- Confirm the model number ENC-6 on the packing list matches the item received.
- Read the 10 specification rows that apply to your application before first use.
- Count the nozzle positions and plan the section map before any electrical work starts.
- Test every position from the cab before the boom is filled.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Keep a section map with the machine; a controller change is much faster with the map to hand.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this spray nozzle control kit is used
Retrofit and repair of electric nozzle switching on spray booms. Each manifold block replaces the switching on two nozzle positions and the loom reaches six positions in the configuration shown; count the nozzle positions on the boom and confirm the controller output before ordering.
This spray nozzle control kit is supplied for agricultural and industrial sprayers. The application list below is built from the published fitment data for this part number rather than a generic catalogue sweep, which is why it is shorter and more specific than a parts-finder list.
- Boom sprayer
- Section control system
- Variable rate application
- Auto nozzle select
- Turn compensation
- Retrofit sprayer upgrade
Fitment verification: Retrofit and repair of electric nozzle switching on spray booms. Each manifold block replaces the switching on two nozzle positions and the loom reaches six positions in the configuration shown; count the nozzle positions on the boom and confirm the controller output before ordering.
The application list is a guide, not a guarantee of fit. Confirm the
model number on the unit and the part number being replaced before ordering.
Quality and inspection
in-process inspection
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The spray nozzle control kit is built to model
ENC-6 and packed against that model number.
Specification count
10 specification rows are listed on this page for the spray nozzle control kit, from control method to application.
exact part; anything else is marked Not published rather than guessed.
Related search terms
A buyer searching spray nozzle control kit is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control method: Electric on/off switching of individual nozzles. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching electric nozzle spray control kit is normally matching a job on the agricultural and industrial sprayers, and the deciding check is manifold outlets: Twin-outlet blocks; two blocks supplied. It appears on the specification table above as well, so page and order agree.
A buyer searching when does the ovulation start is normally matching a job on the agricultural and industrial sprayers, and the deciding check is positions covered: Six nozzle positions. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching when does the parade start is normally matching a job on the agricultural and industrial sprayers, and the deciding check is electrical connection: Sealed three-pin connectors with colour-coded bodies. It is the value the test bench has to reproduce before the part is released.
A buyer searching when does the texas rangers baseball season start is normally matching a job on the agricultural and industrial sprayers, and the deciding check is loom: Sheathed multi-core harness, one connector per position. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching boom sprayer is normally matching a job on the agricultural and industrial sprayers, and the deciding check is filtration: In-line mesh filter with a service bowl. It separates this build from the neighbouring variants in the same family.
A buyer searching sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is fittings: Straight and elbow hose barbs, O-rings and blanking plugs. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching jesse holley is normally matching a job on the agricultural and industrial sprayers, and the deciding check is mounting: Bracket-mounted blocks with a stainless clamp plate. It appears on the specification table above as well, so page and order agree.
A buyer searching boom sprayer nozzles is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control compatibility: CAN-bus and ISOBUS sprayer controllers. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching sprayer parts & accessories is normally matching a job on the agricultural and industrial sprayers, and the deciding check is application: Boom section control and individual nozzle switching. It is the value the test bench has to reproduce before the part is released.
A buyer searching boom sprayer nozzle kit is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control method: Electric on/off switching of individual nozzles. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching boom sprayer for atv is normally matching a job on the agricultural and industrial sprayers, and the deciding check is manifold outlets: Twin-outlet blocks; two blocks supplied. It separates this build from the neighbouring variants in the same family.
A buyer searching boom sprayer for utv is normally matching a job on the agricultural and industrial sprayers, and the deciding check is positions covered: Six nozzle positions. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching b and g sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is electrical connection: Sealed three-pin connectors with colour-coded bodies. It appears on the specification table above as well, so page and order agree.
A buyer searching b&g sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is loom: Sheathed multi-core harness, one connector per position. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching hardi sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is filtration: In-line mesh filter with a service bowl. It is the value the test bench has to reproduce before the part is released.
A buyer searching solo knapsack sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is fittings: Straight and elbow hose barbs, O-rings and blanking plugs. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching wagner sprayer parts is normally matching a job on the agricultural and industrial sprayers, and the deciding check is mounting: Bracket-mounted blocks with a stainless clamp plate. It separates this build from the neighbouring variants in the same family.
A buyer searching spray nozzles for boom sprayer is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control compatibility: CAN-bus and ISOBUS sprayer controllers. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching nozzle boom sprayer is normally matching a job on the agricultural and industrial sprayers, and the deciding check is application: Boom section control and individual nozzle switching. It appears on the specification table above as well, so page and order agree.
A buyer searching boom sprayer for tractor is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control method: Electric on/off switching of individual nozzles. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching boom sprayers for tractors is normally matching a job on the agricultural and industrial sprayers, and the deciding check is manifold outlets: Twin-outlet blocks; two blocks supplied. It is the value the test bench has to reproduce before the part is released.
A buyer searching spray nozzle control kit for boom sprayer is normally matching a job on the agricultural and industrial sprayers, and the deciding check is positions covered: Six nozzle positions. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching spray nozzle control kit for section control system is normally matching a job on the agricultural and industrial sprayers, and the deciding check is electrical connection: Sealed three-pin connectors with colour-coded bodies. It separates this build from the neighbouring variants in the same family.
A buyer searching spray nozzle control kit for variable rate application is normally matching a job on the agricultural and industrial sprayers, and the deciding check is loom: Sheathed multi-core harness, one connector per position. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching spray nozzle control kit for auto nozzle select is normally matching a job on the agricultural and industrial sprayers, and the deciding check is filtration: In-line mesh filter with a service bowl. It appears on the specification table above as well, so page and order agree.
A buyer searching spray nozzle control kit for turn compensation is normally matching a job on the agricultural and industrial sprayers, and the deciding check is fittings: Straight and elbow hose barbs, O-rings and blanking plugs. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching spray nozzle control kit wholesale is normally matching a job on the agricultural and industrial sprayers, and the deciding check is mounting: Bracket-mounted blocks with a stainless clamp plate. It is the value the test bench has to reproduce before the part is released.
A buyer searching spray nozzle control kit supplier is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control compatibility: CAN-bus and ISOBUS sprayer controllers. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching bulk spray nozzle control kit is normally matching a job on the agricultural and industrial sprayers, and the deciding check is application: Boom section control and individual nozzle switching. It separates this build from the neighbouring variants in the same family.
A buyer searching spray nozzle control kit manufacturer is normally matching a job on the agricultural and industrial sprayers, and the deciding check is control method: Electric on/off switching of individual nozzles. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching spray nozzle control kit factory direct is normally matching a job on the agricultural and industrial sprayers, and the deciding check is manifold outlets: Twin-outlet blocks; two blocks supplied. It appears on the specification table above as well, so page and order agree.
A buyer searching spray nozzle control kit distributor is normally matching a job on the agricultural and industrial sprayers, and the deciding check is positions covered: Six nozzle positions. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching spray nozzle control kit for workshop is normally matching a job on the agricultural and industrial sprayers, and the deciding check is electrical connection: Sealed three-pin connectors with colour-coded bodies. It is the value the test bench has to reproduce before the part is released.
A buyer searching spray nozzle control kit OEM equivalent is normally matching a job on the agricultural and industrial sprayers, and the deciding check is loom: Sheathed multi-core harness, one connector per position. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching spray nozzle control kit export is normally matching a job on the agricultural and industrial sprayers, and the deciding check is filtration: In-line mesh filter with a service bowl. It separates this build from the neighbouring variants in the same family.
A buyer searching spray nozzle control kit agricultural and industrial sprayers is normally matching a job on the agricultural and industrial sprayers, and the deciding check is fittings: Straight and elbow hose barbs, O-rings and blanking plugs. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching enc-6 spray nozzle control kit is normally matching a job on the agricultural and industrial sprayers, and the deciding check is mounting: Bracket-mounted blocks with a stainless clamp plate. It appears on the specification table above as well, so page and order agree.
The search terms above are the type term and its model-qualified form,
collected from the specification table published on this page; each one maps to a
model-number-matched line on the order.
Wholesale and B2B supply
Electric nozzle control kits with manifolds, loom, filter and fittings for sprayer manufacturers, agricultural dealers and retrofit specialists.
- Minimum order: 1 piece
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total. Model
ENC-6, MOQ 1 piece, 12 Months warranty – wholesale, container and
consolidated pricing on request.
Pricing is quoted per order. This page carries no published tariff.
Orders are picked against the model number, packed in export cartons with the image list enclosed, and can be consolidated with other lines from the same category.
Lead time is quoted with the order against the destination and the
quantity, and is confirmed before production starts.
Choosing between options
| Individual nozzle switching | switches each nozzle separately, which removes overlap in wedges and on headlands |
|---|---|
| Section control only | switches groups of nozzles, cheaper, with more overlap |
| PWM control | pulses the nozzles to hold a rate as speed changes, a more expensive system again |
For a spray boom the deciding question is how many positions have to switch independently, because that is what sets the number of blocks on the order.
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
6 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frame by frame: Filter, barbs, O-rings and cable; Six sealed connectors on the loom; Single cable with a three-pin plug; Blocks with fittings and loom; Two blocks, blue connectors; Valves and clamp plate close up.
The same file names appear in the image list issued with the order.
Frequently asked questions
Is this a genuine the original equipment maker product?
No. It is a compatible replacement supplied under the Vidishi Auto brand to the specification published on this page. It is not a genuine the original equipment maker product and is not affiliated with the original equipment maker. Where a reference part number appears it identifies the equipment being replaced, not an original-equipment product, and no affiliation with the original equipment maker is claimed.
What does model ENC-6 cover?
10 specification rows are published for it, from control method to application. The delivered material is Glass-filled nylon manifold blocks, brass fittings and a sheathed cable loom and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Retrofit and repair of electric nozzle switching on spray booms. Each manifold block replaces the switching on two nozzle positions and the loom reaches six positions in the configuration shown; count the nozzle positions on the boom and confirm the controller output before ordering.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 piece, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. Every frame on this page shows this exact item.
What is the lead time on this item?
Lead time is quoted per order against the model number, the quantity and the destination, and it is confirmed on the order acknowledgement before production starts. Consolidated shipments follow the same confirmation.
What happens if it does not fit?
Returns are handled under the site returns policy. Fitment is confirmed by the model number and the number stamped on the unit being replaced before dispatch, which is what keeps a wrong-part return from happening in the first place.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Support and ordering information
Need this part matched?
Send the model number or the part number stamped on the unit you are replacing, and
we return the matched item with a delivered quotation. Technical answers always
match the specification shown above, so what we quote and what you read here never
disagree.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Order checklist
- Model number: ENC-6
- Reference part number: VDS-SPRAY-CTRL-ELEC
- Minimum order: 1 piece
- Warranty: 12 Months
- Brand: Vidishi Auto
Reviews