Product Specifications
| year | |
|---|---|
| make | |
| model | |
| engine | 2.0 TFSI (CDNC / CNCD / CNCE / DAXB), 3.0 TFSI supercharged (CTVA), 3.2 FSI (CALB) |
| position |
Product Details
Audi 8R0919051N — Overview
The Audi 8R0919051N is an aftermarket fuel pump assembly supplied under the Vidishi Auto brand, built as a direct-fit replacement for the reference Audi 8R0919051N. It is a drop-in unit for the applications listed in the fitment section.
We stock this unit for wholesale, fleet and retail repair supply, with batch traceability on every order.
Fitment — Audi 8R0919051N
Compatible with the following Audi applications. Always confirm the 8R0919051N by matching the OE number on the part label and the engine code on the vehicle data plate.
- Audi Q5 8R 2.0 TFSI Quattro
- Audi Q5 8R 3.0 TFSI Quattro
- Audi Q5 8R 3.2 FSI Quattro
- Audi Q5 FY 2.0 TFSI 45 TFSI
Engine codes: 2.0 TFSI (CDNC / CNCD / CNCE / DAXB), 3.0 TFSI supercharged (CTVA), 3.2 FSI (CALB) · Model years: 2009-2017 (Q5 8R; FY from 2017).
Specifications
| Part number | 8R0919051N |
| Product type | Fuel Pump Assembly |
| Condition | New |
| Brand | Audi, Vidishi Auto |
| MOQ | 1 piece |
| Reference brand | Audi |
| Model years | 2009-2017 (Q5 8R; FY from 2017) |
| Voltage | 12V |
| Material | plastic module |
| Fuel Type | Petrol |
| Fitment Type | in-tank direct-fit fuel pump module |
| Weight | approx 1.3 kg |
| Operating Mode | electric in-tank feed unit with level sender |
Values shown are the published specifications for this 8R0919051N. Confirm critical values against the OE part before bulk order.
Common Failure Symptoms
Before replacing, confirm the fault. Signs that point to a failing 8R0919051N fuel pump assembly include:
- Hard starting or no start from no fuel pressure
- Engine sputtering, hesitation and loss of power under load
- Stalling and rough running from unstable fuel delivery
- Whining noise from the in-tank pump
- Dead or inaccurate fuel gauge from a failed level sender
- Check-engine light (e.g. P0087 / P0191 / P0230) from fuel-delivery faults
These symptoms can also arise from related components, so verify the fuel pressure and electrical supply before fitting a new unit.
Installation Notes
Depressurise and drain the tank before work. Match the module by the OE number on the old unit and the engine code, and note the connector type. Replace the tank seal, inspect the fuel filter and lines, then prime and check for leaks and correct pressure.
Cross Reference — 8R0919051N
The 8R0919051N fuel pump assembly is interchangeable with, and replaces, the following reference numbers:
- 8R0919051N
- 8R0919051N001
- 8R0919051A
- 8R0919051C
- 8R0201865A
- A2180165700
- FG1575
- SP5127M
- USEP8936M
Reference: this is a compatible replacement part supplied under the Vidishi Auto brand. It is not a genuine Audi product and is not sold as, or endorsed by, the original manufacturer. Trademarks are the property of their respective owners and are used only to describe compatibility.
Product Gallery




Frequently Asked Questions
Is the 8R0919051N a genuine Audi part?
No. It is a compatible in-tank fuel pump module supplied under the Vidishi Auto brand, built to replace the 8R0919051N unit. It is not made or endorsed by Audi; OEM numbers are used only to describe compatibility.
What does the 8R0919051N replace?
It replaces the Audi fuel pump module 8R0919051N and related numbers 8R0919051A / 8R0919051C / 8R0201865A. Match by the number on your old unit.
Which cars use the 8R0919051N?
Audi Q5 (8R) with 2.0 TFSI, 3.0 TFSI and 3.2 FSI engines, roughly 2009-2017, and the Q5 FY from 2017. Confirm with your engine code.
What are the signs of a failing fuel pump module?
Hard starting, sputtering, loss of power, stalling, a whining pump and an inaccurate fuel gauge. Confirm fuel pressure before replacing.
Does it include the fuel level sender?
Yes. This is a fuel pump module with the level sender integrated in the in-tank unit.
How do I confirm fitment before ordering?
Send the OE number from your old module and your engine code (and connector type) and we will confirm the correct variant for your Q5.
Wholesale & Bulk Supply
We supply the Audi 8R0919051N to wholesale distributors, fleet operators and repair shops, including Audi. MOQ starts at 1 piece; container and mixed orders are available.
As an aftermarket fuel pump assembly supplier we support OEM-coded ordering, part-number matching and drop-shipment. Contact our team on WhatsApp for lead times and tiered pricing.
Applications & Search Terms
Buyers and workshops searching this unit typically use terms such as fuel pump, fuel pump replacement cost, fuel pump relay, fuel pump replacement, electric fuel pump, fuel pump symptoms, fuel pump control module, fuel pump fuse.
Across catalogues the same unit also appears under these part numbers and search terms:
fuel pump assembly, fuel pump cost replacement, fuel pump removal tool, fuel pump repair, fuel pumps, electric fuel pump for carburetor, fuel pump module, fuel pump relay replacement, fuel pump driver module, fuel pump lock ring tool, fuel pump of car, electric fuel pumps, fuel pump cost, fuel pump for car, fuel pump fusible, fuel pump tester, fuel pump problems
Typical applications include Audi Q5 model years 2009-2017 (Q5 8R; FY from 2017).
Quality & Warranty
Every fuel pump assembly is inspected before dispatch and covered by a 12-month functional warranty against manufacturing defects. Each unit is batch-traceable by part number 8R0919051N.
Shipping & Handling
We ship fuel pump assembly worldwide by air, sea and courier. MOQ 1 piece. Standard protective packaging; fuel-system parts are drained and sealed for transport. Ask for the current lead time and freight quote on WhatsApp.
Ready to order the 8R0919051N?
Send the part number 8R0919051N and your quantity for a quotation. Our team replies on WhatsApp within one business day.
Fitment Support
Not 100% sure the 8R0919051N fits? Send the VIN or the OE number from your old part and we will confirm the correct fuel pump assembly before you order. Technical support is free.

Reviews