LED Light White Underbody Retrofit for Universal 12V vehicles

Specifications

Product overview

The LED Light is supplied under the Vidishi Auto brand as a compatible aftermarket replacement. It targets Universal 12V vehicles and is referenced by fender-well-light-kit-12v-288w-ip68. Four bar and multi pod wheel well light kits for 12V trucks are a mature category with IP67 and IP68 sealed aluminium channels. White and colour output options are standard; controllers and wired harnesses are included in this class of kit. Drill or screw mounting inside the fender well with a fused 12V supply is the standard installation.

Compatibility & fitment guide

Cross-market trim levels vary, so confirm the exact match for this LED Light against the reference number below before ordering. How to identify the correct unit: locate the reference number stamped on your original component or in the vehicle parts catalogue, then cross-check it against the number below before ordering.

How to identify & confirm fitment in 4 steps

1. Locate the OE / reference number on your old part or in the vehicle parts catalogue.
2. Match it to fender-well-light-kit-12v-288w-ip68 shown on this page.
3. Send your VIN and engine code plate so our team runs an exact-fit check.
4. Receive fitment confirmation before we dispatch your order.

Cross-reference coverage for universal 12v vehicles led light and led light fitment is listed above; confirm your VIN before ordering.

Key features

Buyers searching led light bulbs, led lights for room and led light therapy look for the strengths listed here: direct fit, verified reference and wholesale packing.

The strengths workshop buyers compare when searching best led light for universal 12v vehicles and underbody are listed above.

Construction & materials

Built to the original equipment drawing, the LED Light uses Aluminium LED silicone and is inspected for fit and finish. Each unit is matched to reference fender-well-light-kit-12v-288w-ip68 before packing.

• Aluminium LED silicone construction for daily and workshop use.
• Surface treated to resist corrosion in road and workshop conditions.
• Dimensional check against the reference sample before packing.

Material and build choices answer the most common led light replacement and led light guide questions from workshop buyers.

Application & fitment

Suitable for Universal 12V vehicles. Verify with the vehicle's engine code plate or VIN for an exact match. Bulk and mixed-container orders are supported for distributors.

Technical notes

• Four bar and multi pod wheel well light kits for 12V trucks are a mature category with IP67 and IP68 sealed aluminium channels
• White and colour output options are standard; controllers and wired harnesses are included in this class of kit
• Drill or screw mounting inside the fender well with a fused 12V supply is the standard installation
• The listing states 288W total output; competitor kits state per bar output rather than total, so the figure is taken from the source listing

Technical documentation for aftermarket led light and compatible led light is available on request.

Quality & authority

Manufactured to an IATF 16949-style quality process where applicable and inspected before shipment. We provide fitment confirmation so you receive the correct part the first time.

Warranty & support

12 Months limited warranty against manufacturing defects. Fitment must be confirmed by OE number or VIN prior to installation. Wiring and voltage questions are answered by our technical team before dispatch.

Wiring and voltage questions are answered by our technical team before dispatch.

Why choose Vidishi Auto

Vidishi Auto supplies LED Light as a wholesale-compatible alternative with stable lead time, export carton packing and fitment verification by VIN. Established buyers can request private-label and mixed-container options. Sealed lighting units are stocked for truck and service-vehicle fleets with stable lead time.

Shipping & packaging

We ship worldwide to distributors and garages from China, Dongguan. Each LED Light is packed in a single-unit export carton. Lighting units ship in foam-lined cartons to protect lenses and housings. Tracked air or sea freight is arranged per order volume.

Bulk quantities of led light supplier and led light bulk order ship in mixed containers from China, Dongguan.

Cross-reference & catalog

Reference / OE number: fender-well-light-kit-12v-288w-ip68. Cross-check this number against your old part or send it to our team for an instant match.

Catalog cross-references for led light catalog resolve to fender-well-light-kit-12v-288w-ip68.

Frequently asked questions

Compliance disclaimer

Vidishi Auto is an independent supplier. This is an aftermarket compatible replacement, not a genuine OEM part. Brand names are trademarks of their respective owners and are used only to identify fitment.

Wholesale & support

Send your OE number or VIN for an instant fitment check and wholesale quotation. Mixed SKU containers and private-label options are available for established buyers. Wiring diagrams and connector guides are available on request.

Wiring diagrams and connector guides are available on request.

Vidishi Auto supplies LED Light to distributors and garages worldwide.

Enquiries about wholesale led light and led light price receive quotations within one business day.

Wiring & voltage

Lighting retrofits are wired into the vehicle circuit; the electrical scope below is confirmed with every order.

• Pre-dispatch checks: Aluminium LED silicone construction is verified against the reference sample before packing; fitment covers Universal 12V vehicles applications.
• Operating voltage and connector type are confirmed against your vehicle circuit before dispatch.
• Wiring length and mounting-hole details are confirmed with the quotation.
• Lenses and housings are inspected and foam-lined for export packing.

Installation and service notes for oem led light, led light strips and led light bulbs that are dimmable are confirmed by our technical team before dispatch.

Workshop teams comparing led light bars, led light cross reference and white underbody retrofit receive the pre-dispatch checklist with the quotation.

Sealing & beam pattern

Sealing and beam performance decide service life on truck and service-vehicle programs; the scope below is confirmed before dispatch.

• Configuration checks: the supplied configuration is confirmed against your order before dispatch.
• Sealing class and lens material are confirmed against your application before dispatch.
• Beam pattern and mounting orientation are confirmed with the quotation.
• Replacement lenses and gaskets are quoted for repair programs.

Configuration and service notes for led light bulb led, led light strip and led light fixture are confirmed by our technical team before dispatch.

Workshop teams comparing underbody retrofit receive the configuration checklist with the quotation.

Flicker & thermal checks

Electrical stability checks are part of our pre-dispatch routine for lighting programs.

• Reference checks: the OE / reference number is matched against your old part before packing; supply covers Universal 12V vehicles programs.
• Each unit is checked for even illumination before packing.
• Connector polarity and grounding notes are confirmed with the quotation.
• Heat-sink and housing contact details are confirmed against your application.

Application data for led light bulb, led lights for bedroom and how to confirm led light fitment is confirmed against your specification before dispatch.

Engineering checks behind the white underbody supply are completed before packing.