Vidishi Auto supply · part reference controlarm-0da99e

Supplied under the Vidishi Auto brand for wholesale and B2B programs. Reference controlarm-0da99e.

Tsbj Front controlarm-0da99e for Xpeng

Repair Kit supplied under the Vidishi Auto brand. Built for wholesale and B2B supply with a 12-month warranty.

TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 is a repair kit engineered to the original equipment drawing. It uses OE-grade construction The unit fits applications listed in the fitment section and ships from our facility in China, Dongguan. Verify the part number controlarm-0da99e before order. We stock this repair kit for same-day wholesale dispatch and confirm fitment by part number on WhatsApp.

Distributors quote volumes for engine rod because a documented spec shortens receiving-line QC.

Carton documentation for engine rod mirrors the numbers published in this specification.

Workshops consolidate orders for engine rod to avoid a second bench visit.

Service centres specify polishing kit to keep the spare list short.

Carton documentation for polishing kit mirrors the numbers published in this specification.

Export agencies hold shelf space for polishing kit with the specification sheet packed on top.

Installers fitting this Repair Kit on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit.

Reference controlarm-0da99e is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch 50526C2B.

Ships in export-grade cartons with the connector protected in a separate bag.

Product overview

This repair kit exists for one job: replace the original that has worn, wept, or cut out intermittently, without touching the mounting points. The build keeps tolerance under load. Nothing ships until the unit has passed a leak test and a dimension check against the OE drawing.

This is not a genuine part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.

Parts desks forecast demand for rod end so warranty claims stay simple.

Carton documentation for rod end mirrors the numbers published in this specification.

Garage groups book stock against rod end so the fitter works to torque values rather than habit.

Rebuilders specify front light to avoid a second bench visit.

Carton documentation for front light mirrors the numbers published in this specification.

Trade counters quote volumes for front light because a documented spec shortens receiving-line QC.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part. Batch 50526C2B.

Gallery images show the actual unit from the current production batch, not renders.

Connector orientation matches the original position, so no harness re-pinning is needed.

Batch codes on the housing trace back to the bench test record.

Housing markings match the table exactly as photographed.

Specifications

Fleets running the applications in the fitment table standardise on reference controlarm-0da99e to keep the spare list short.

The carton for reference controlarm-0da99e is drop-tested to the transport standard before the lane is approved. Batch 50526C2B.

Values marked on the housing match the table above; measure on receipt to confirm.

If a figure you need is blank, message the desk and we will measure a unit for you.

Tolerances follow the original equipment drawing for a drop-in fit.

Ask for the dimension drawing if your QC needs a CAD reference.

Overview

The TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 belongs to our Control Arm range and is stocked for same-day wholesale dispatch. Buyers choose this repair kit for its OE-grade build . Fleet managers value the consistent actuation and the 12-month warranty; repair shops value the direct-fit dimensions that cut bench time; importers value the stable wholesale lead time and the documented specification.

Every figure on this page is stated from the production specification, so what you read is what ships. The Control Arm category is built for professional buyers who need repeatable quality, not a one-off bargain.

Related references: Control Arm category · product detail · warranty policy · shipping policy · our brand

Importers keep records for electronic kit so the shelf never dips before the reorder lands.

Carton documentation for electronic kit mirrors the numbers published in this specification.

Wholesale partners book stock against electronic kit to keep the spare list short.

Fleet depots standardise on kit repair and confirm the reference at dispatch.

Carton documentation for kit repair mirrors the numbers published in this specification.

Volume buyers forecast demand for kit repair so warranty claims stay simple.

Workshops keep records for wiring kit so the fitter works to torque values rather than habit.

Carton documentation for wiring kit mirrors the numbers published in this specification.

Distributors specify wiring kit to avoid a second bench visit.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files.

Reorder signals for controlarm-0da99e are tracked against your last three off-takes to keep the shelf covered. Batch 50526C2B.

A repeatable specification is what turns a one-time order into a supply agreement.

The same unit serves single repairs and pallet programs without spec changes.

Lead time is quoted per quantity with stock held against agreed forecasts.

Technical specification

Before packing, every repair kit is checked line by line against the original equipment drawing. Tight tolerances keep the unit stable through thermal cycling. The electrical rating is validated across the temperature range. Dimensions are per the OE drawing. Every figure is read off the production specification and confirmed on the bench; where a value is not confirmed we leave the row blank instead of guessing.

The repair kit is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated electrical condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.

Export agencies hold shelf space for tsbj controlarm rating to cut diagnostic time on repeat failures.

Carton documentation for tsbj controlarm rating mirrors the numbers published in this specification.

Service centres forecast demand for tsbj controlarm rating so the shelf never dips before the reorder lands.

Garage groups consolidate orders for tsbj controlarm specification so warranty claims stay simple.

Carton documentation for tsbj controlarm specification mirrors the numbers published in this specification.

Parts desks standardise on tsbj controlarm specification and confirm the reference at dispatch.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference controlarm-0da99e carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch 50526C2B.

Thermal cycling and vibration tests run per production batch, not per sample year.

Materials are certified to the drawing grade, with mill certificates on file.

First-article inspection is available for volume programs on request.

Batch test records are archived and available on request.

Fitment

Fitment verification

Confirm the engine code plate and the part number controlarm-0da99e before purchase. This repair kit fits the applications in our fitment list. If your vehicle is not listed, send the VIN or engine code on WhatsApp for a free check.

Match the old part side by side: stamping, connector shape, and mounting points must agree. A wrong revision will not seat and may damage the surrounding circuit.

Typical fitment scenarios for the repair kit: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm controlarm-0da99e against the old stamping.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

Trade counters hold shelf space for tsbj for controlarm because the batch record travels with the carton.

Carton documentation for tsbj for controlarm mirrors the numbers published in this specification.

Rebuilders keep records for tsbj for controlarm because a documented spec shortens receiving-line QC.

Wholesale partners book stock against controlarm tsbj so the shelf never dips before the reorder lands.

Carton documentation for controlarm tsbj mirrors the numbers published in this specification.

Importers standardise on controlarm tsbj to cut diagnostic time on repeat failures.

Volume buyers quote volumes for tsbj controlarm replacement with the specification sheet packed on top.

Carton documentation for tsbj controlarm replacement mirrors the numbers published in this specification.

Fleet depots consolidate orders for tsbj controlarm replacement so warranty claims stay simple.

Reference controlarm-0da99e is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this Repair Kit include the applications in the fitment table — confirm the reference controlarm-0da99e against the unit you remove. Batch 50526C2B.

Fitment questions are answered by part number, not by photo, to avoid near-miss orders.

Where two variants share a housing, the desk confirms the correct one before quoting.

Vehicle-side cross-checks use the OE number printed on the unit you remove.

Send the vehicle VIN and the desk confirms fitment in writing.

Cross reference

Cross reference

Reference numbers for this repair kit: controlarm-0da99e. Cross numbers help you match the old part when the stamping has worn.

We publish only the numbers we have confirmed. Cross numbers we have not checked are left off the page. When in doubt, send a photo of the old part and we will confirm the match before you pay.

Distributors book stock against tsbj fits controlarm so the fitter works to torque values rather than habit.

Carton documentation for tsbj fits controlarm mirrors the numbers published in this specification.

Workshops hold shelf space for tsbj fits controlarm because the batch record travels with the carton.

Service centres forecast demand for controlarm series tsbj because a documented spec shortens receiving-line QC.

Carton documentation for controlarm series tsbj mirrors the numbers published in this specification.

Export agencies consolidate orders for controlarm series tsbj so the shelf never dips before the reorder lands.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to controlarm-0da99e before quoting. Batch 50526C2B.

Cross numbers are matched against the OE drawing, never guessed from a photo.

If your cross number is not shown, send it and we will confirm coverage in writing.

Equivalent references are listed for convenience, with the OE number as master.

Cross-reference tables are updated from the OE catalogue each quarter.

Key features

• OE-drawing dimensions for direct fit
• OE-grade materials
• Stable electrical rating
• Leak-tested before packing
• 12-month warranty
• Wholesale and B2B supply

Beyond the list, the repair kit is chosen for repeatable quality across a batch. Importers receive the same specification on every carton, which keeps warranty claims low and rebuilds predictable.

Parts desks specify tsbj controlarm dimensions to keep the spare list short.

Carton documentation for tsbj controlarm dimensions mirrors the numbers published in this specification.

Garage groups quote volumes for tsbj controlarm dimensions with the specification sheet packed on top.

The carton for reference controlarm-0da99e is drop-tested to the transport standard before the lane is approved.

Lead time for controlarm-0da99e is quoted against stock already on the shelf at China, Dongguan. Batch 50526C2B.

Each feature is checked on the bench, not inferred from a catalogue description.

Feature claims are limited to what the production line can verify unit by unit.

Where a feature depends on vehicle trim, the desk flags it before order.

Each claim is backed by a bench test, not by a catalogue line.

Symptoms & engineering

Engineering notes

The TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 is designed around the original equipment geometry so the repair kit seats without modification. Tight tolerances keep the unit stable under thermal cycling. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench. Common failure signs that point to replacement are intermittent operation, loss of pressure, and visible leakage at the seal. Replace on a clean bench and torque to the OE spec. These notes are derived from the production drawing and bench test, not from generic copy. We do not over-state performance: every rating on this page comes from the production specification.

A worn repair kit typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the repair kit when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.

Store the new repair kit in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Verified details held on file by our technical desk: Front control arm kit (with tie rod end, ball joint and stabilizer link) for the XPENG G3 (G3/G3i) electric SUV, model years about 2019-2023.. The kit includes the front control arm plus tie rod ends, ball joint and stabilizer (sway bar) link for a complete front-end refresh.. XPENG G3 front lower arms use a dual-bushing design (inner about 45mm, outer about 70mm) with a non-interchangeable left/right ball joint; torque bolts to spec and align after install.. After replacement a four-wheel alignment is mandatory to prevent tire feathering and steering pull..

Rebuilders forecast demand for control arm tsbj range controlarm 4 because the batch record travels with the carton.

Carton documentation for control arm tsbj range controlarm 4 mirrors the numbers published in this specification.

Trade counters book stock against control arm tsbj range controlarm 4 so the fitter works to torque values rather than habit.

Importers standardise on tsbj controlarm spec to avoid a second bench visit.

Carton documentation for tsbj controlarm spec mirrors the numbers published in this specification.

Wholesale partners quote volumes for tsbj controlarm spec to cut diagnostic time on repeat failures.

Reorder signals for controlarm-0da99e are tracked against your last three off-takes to keep the shelf covered.

The drawing revision behind controlarm-0da99e is recorded on the test sheet packed with each carton. Batch 50526C2B.

Most field failures trace to heat, vibration, or contaminated connectors — fix the root cause too.

Replace the unit and any damaged connector together to stop repeat failures.

Log the failure mode with the desk so the next order matches the corrected spec.

Installation

1. Disconnect power and relieve system pressure.
2. Remove the old repair kit after noting the part number controlarm-0da99e.
3. Clean the seat and check for debris or worn seals.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Installation difficulty is moderate. If unsure, use a qualified technician. Keep the old part until you confirm the new unit behaves correctly.

Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new repair kit will fail the same way.

Fleet depots keep records for tsbj controlarm rating controlarm 1 with the specification sheet packed on top.

Garage groups hold shelf space for tsbj controlarm rating controlarm 1 so the fitter works to torque values rather than habit.

Volume buyers specify tsbj controlarm rating controlarm 1 to keep the spare list short.

Reference controlarm-0da99e carries the same warranty terms as the rest of the Vidishi Auto wholesale range.

Installers fitting this Repair Kit on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit. Batch 50526C2B.

Warranty

Every repair kit carries a 12-month warranty from the date of purchase. The warranty covers manufacturing defects, not misuse or incorrect fitment. Keep the order number and part number controlarm-0da99e for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

Workshops standardise on tsbj quality test controlarm 1 and confirm the reference at dispatch.

Carton documentation for tsbj quality test controlarm 1 mirrors the numbers published in this specification.

Distributors forecast demand for tsbj quality test controlarm 1 because the batch record travels with the carton.

Applications for this Repair Kit include the applications in the fitment table — confirm the reference controlarm-0da99e against the unit you remove.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing. Batch 50526C2B.

Claims are handled by part number with a photo of the unit and the vehicle details.

Wholesale & B2B

We supply TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 in wholesale and B2B quantities with tiered pricing. Minimum order is 500 units. Request a quote on WhatsApp for volume discounts and lead time. OEM and ODM customization is available on request, including private labelling and custom connectors.

Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.

Export agencies consolidate orders for tsbj bulk supply controlarm 1 because a documented spec shortens receiving-line QC.

Carton documentation for tsbj bulk supply controlarm 1 mirrors the numbers published in this specification.

Service centres specify tsbj bulk supply controlarm 1 to avoid a second bench visit.

Garage groups hold shelf space for tsbj manufacturer china controlarm 2 to cut diagnostic time on repeat failures.

Carton documentation for tsbj manufacturer china controlarm 2 mirrors the numbers published in this specification.

Parts desks keep records for tsbj manufacturer china controlarm 2 with the specification sheet packed on top.

Trade counters consolidate orders for tsbj moq price controlarm 3 so warranty claims stay simple.

Carton documentation for tsbj moq price controlarm 3 mirrors the numbers published in this specification.

Rebuilders standardise on tsbj moq price controlarm 3 and confirm the reference at dispatch.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to controlarm-0da99e before quoting.

Fleets running the applications in the fitment table standardise on reference controlarm-0da99e to keep the spare list short. Batch 50526C2B.

MOQ, tier pricing, and lead time are confirmed in writing before the first carton.

Shipping

Orders ship from China, Dongguan. Packaged shipping weight is stated per the carton. We use sea, air, and express options. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

Wholesale partners quote volumes for tsbj air freight controlarm 1 to avoid a second bench visit.

Carton documentation for tsbj air freight controlarm 1 mirrors the numbers published in this specification.

Importers keep records for tsbj air freight controlarm 1 because a documented spec shortens receiving-line QC.

Volume buyers book stock against tsbj export carton controlarm 2 so the shelf never dips before the reorder lands.

Carton documentation for tsbj export carton controlarm 2 mirrors the numbers published in this specification.

Fleet depots hold shelf space for tsbj export carton controlarm 2 to keep the spare list short.

Distributors quote volumes for tsbj sea freight controlarm 3 and confirm the reference at dispatch.

Carton documentation for tsbj sea freight controlarm 3 mirrors the numbers published in this specification.

Workshops consolidate orders for tsbj sea freight controlarm 3 so warranty claims stay simple.

Lead time for controlarm-0da99e is quoted against stock already on the shelf at China, Dongguan.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files. Batch 50526C2B.

Cartons are drop-tested to the export standard and palletised on request.

Tracking is shared the day the carton leaves the dock.

Brand & reference

This repair kit is supplied under the Vidishi Auto brand. Vidishi Auto is the responsible brand for specification and warranty. We are not affiliated with the original brand owner.

Using a reference brand name helps buyers find the right replacement; it does not imply endorsement by or partnership with that brand.

Service centres specify vidishi tsbj wholesale controlarm 1 so the fitter works to torque values rather than habit.

Carton documentation for vidishi tsbj wholesale controlarm 1 mirrors the numbers published in this specification.

Export agencies hold shelf space for vidishi tsbj wholesale controlarm 1 to avoid a second bench visit.

Parts desks forecast demand for vidishi auto tsbj controlarm 2 to cut diagnostic time on repeat failures.

Carton documentation for vidishi auto tsbj controlarm 2 mirrors the numbers published in this specification.

Garage groups book stock against vidishi auto tsbj controlarm 2 so the shelf never dips before the reorder lands.

Rebuilders specify tsbj vidishi supplier controlarm 3 to keep the spare list short.

Carton documentation for tsbj vidishi supplier controlarm 3 mirrors the numbers published in this specification.

Trade counters quote volumes for tsbj vidishi supplier controlarm 3 and confirm the reference at dispatch.

Importers keep records for vidishi tsbj manufacturer controlarm 4 because the batch record travels with the carton.

Carton documentation for vidishi tsbj manufacturer controlarm 4 mirrors the numbers published in this specification.

Wholesale partners book stock against vidishi tsbj manufacturer controlarm 4 so the fitter works to torque values rather than habit.

The drawing revision behind controlarm-0da99e is recorded on the test sheet packed with each carton.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch 50526C2B.

The reference brand is cited only for fitment cross-checking, not as the maker.

Own-brand packaging is available for importers who retail under their label.

Brand claims are limited to what the production line can verify.

FAQ

Fleet depots standardise on tsbj factory direct controlarm 4 so the shelf never dips before the reorder lands.

Carton documentation for tsbj factory direct controlarm 4 mirrors the numbers published in this specification.

Volume buyers forecast demand for tsbj factory direct controlarm 4 to cut diagnostic time on repeat failures.

Installers fitting this Repair Kit on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit.

Reference controlarm-0da99e is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch 50526C2B.

Answers above reflect the production specification, not marketing copy.

Unanswered questions go to the desk and get a reply within one business day.

Data & compliance

How we label data

Every figure on this page is stated from the production specification, or left blank where it is not confirmed. That keeps the published data honest.

This product is a compatible replacement and is not endorsed by the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Workshops keep records for tsbj certification controlarm 2 with the specification sheet packed on top.

Carton documentation for tsbj certification controlarm 2 mirrors the numbers published in this specification.

Distributors specify tsbj certification controlarm 2 so warranty claims stay simple.

Export agencies hold shelf space for tsbj inspection report controlarm 3 so the fitter works to torque values rather than habit.

Carton documentation for tsbj inspection report controlarm 3 mirrors the numbers published in this specification.

Service centres forecast demand for tsbj inspection report controlarm 3 because the batch record travels with the carton.

Garage groups consolidate orders for tsbj oem standard controlarm 4 because a documented spec shortens receiving-line QC.

Carton documentation for tsbj oem standard controlarm 4 mirrors the numbers published in this specification.

Parts desks standardise on tsbj oem standard controlarm 4 so the shelf never dips before the reorder lands.

Trade counters hold shelf space for tsbj warranty controlarm 5 to keep the spare list short.

Carton documentation for tsbj warranty controlarm 5 mirrors the numbers published in this specification.

Rebuilders keep records for tsbj warranty controlarm 5 with the specification sheet packed on top.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part. Batch 50526C2B.

Data fields left blank are those the line has not verified, by policy.

Support

Need help with TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (controlarm-0da99e) so repeat orders are fast.

We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and controlarm-0da99e and we will process it on the same line you ordered from.

Wholesale partners book stock against tsbj wholesale controlarm 5 so warranty claims stay simple.

Carton documentation for tsbj wholesale controlarm 5 mirrors the numbers published in this specification.

Importers standardise on tsbj wholesale controlarm 5 so the fitter works to torque values rather than habit.

Volume buyers quote volumes for tsbj fast delivery controlarm 4 to avoid a second bench visit.

Carton documentation for tsbj fast delivery controlarm 4 mirrors the numbers published in this specification.

Fleet depots consolidate orders for tsbj fast delivery controlarm 4 because a documented spec shortens receiving-line QC.

Fleets running the applications in the fitment table standardise on reference controlarm-0da99e to keep the spare list short.

The carton for reference controlarm-0da99e is drop-tested to the transport standard before the lane is approved. Batch 50526C2B.

Control Arm fitment & spec match

This repair kit is matched to the application before it ships: TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3. Confirm TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 against your vehicle, and cross-check controlarm-0da99e with the old part so the replacement seats correctly on the first try.

• Part type: Repair Kit.
• Material: the supplied.
• Reference: controlarm-0da99e.
• Supplied by the factory, built to the production drawing.

Where the fitment list is long, match by year, model, and engine before ordering; a five-minute check prevents a return and keeps the right part on the shelf.

Distributors book stock against tsbj shipping controlarm 5 with the specification sheet packed on top.

Rebuilders keep records for tsbj shipping controlarm 5 so the fitter works to torque values rather than habit.

Workshops hold shelf space for tsbj shipping controlarm 5 to keep the spare list short.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files.

Reorder signals for controlarm-0da99e are tracked against your last three off-takes to keep the shelf covered. Batch 50526C2B.

Control Arm install & torque

Torque the control arm to the vehicle figure and renew the hardware; reused fasteners are the usual cause of comeback, so replace them with the the supplied grade called out on the drawing. The factory ships the part to the production tolerance, and controlarm-0da99e is the number to quote for the matching hardware.

Work on a clean bench, protect the mating faces, and keep TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 in view so the next technician reorders the same unit without guessing. TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3 before you commit to the order.

Service centres forecast demand for control arm tsbj controlarm 5 and confirm the reference at dispatch.

Importers standardise on control arm tsbj controlarm 5 to cut diagnostic time on repeat failures.

Export agencies consolidate orders for control arm tsbj controlarm 5 because the batch record travels with the carton.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference controlarm-0da99e carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch 50526C2B.

Demand notes for this unit type are shared with standing customers each quarter.

Packaging revisions are announced ahead of the change, never at the dock.

Control Arm verification

after fitment, re-check the arm geometry and ball-joint play. A the supplied part held to tolerance gives the same service life as the original, and controlarm-0da99e is the number to log for warranty and repeat orders.

Document the reading or clearance you set for TSBJ High Quality Front Control Arm Kit with Tie Rod End & Ball Joint and Stabilizer Link for XPENG G3, keep the record with the job card, and the next rebuild starts from a known-good baseline instead of a guess.

Parts desks specify light kit because a documented spec shortens receiving-line QC.

Fleet depots keep records for light kit to keep the spare list short.

Garage groups quote volumes for light kit to avoid a second bench visit.

Reference controlarm-0da99e is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this Repair Kit include the applications in the fitment table — confirm the reference controlarm-0da99e against the unit you remove. Batch 50526C2B.

Programme notes

Programme note: importers running this unit as a line item standardise on one part number across depots, which shortens warranty handling and makes the reorder a one-line message.

• Forecast holds keep the reorder moving before the shelf dips.
• Batch documentation travels with every carton for audit trails.