Direct-fit Fuel Pump · spec-verified at China, Dongguan · ref yz-4003-2

Compatible replacement · own-brand packing available. Reference yz-4003-2.

Bench-verified unit · batch code on housing. Reference yz-4003-2.

Supplied under the Vidishi Auto brand for wholesale and B2B programs. Reference yz-4003-2.

yz-4003-2 Electric Hydraulic 12V Ac for Tire Change

Fuel Pump supplied under the Vidishi Auto brand, compatible replacement referencing AYZ. Built for wholesale and B2B supply with a 12-month warranty.

Program buyers spec 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change when they need a fuel pump that matches the original equipment drawing without modification. OE-grade construction backs the rating. Applications covered: the fitment list on this page. Dispatch runs from Zhejiang, China; send YZ-4003-2 with your enquiry and the desk returns stock status, wholesale price and fitment confirmation in one reply.

Garage groups consolidate orders for 12v ac so the fitter works to torque values rather than habit.

Fitment checks for 12v ac run through part number yz-4003-2 before the carton is sealed.

Parts desks standardise on 12v ac because the batch record travels with the carton.

Trade counters hold shelf space for 12v fuel pump because a documented spec shortens receiving-line QC.

Fitment checks for 12v fuel pump run through part number yz-4003-2 before the carton is sealed.

Rebuilders keep records for 12v fuel pump so the shelf never dips before the reorder lands.

Fleets running the applications in the fitment table standardise on reference yz-4003-2 to keep the spare list short.

The carton for reference yz-4003-2 is drop-tested to the transport standard before the lane is approved. Batch F586CC42.

The label carries both the part number and the batch code.

Sample units can ship with the first wholesale order.

Ships in export-grade cartons with the connector protected in a separate bag.

Every carton carries the part number on two labels for receiving-line scans.

Product overview

When the original part wears or starts failing intermittently, workshops spec this fuel pump as the like-for-like replacement. The OE-grade construction holds tolerance under load. A leak test and a dimension check against the OE drawing happen before any unit leaves the line.

This is not a genuine AYZ part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.

Wholesale partners book stock against 12v light to keep the spare list short.

Fitment checks for 12v light run through part number yz-4003-2 before the carton is sealed.

Importers standardise on 12v light with the specification sheet packed on top.

Volume buyers quote volumes for 12v air conditioning because the batch record travels with the carton.

Fitment checks for 12v air conditioning run through part number yz-4003-2 before the carton is sealed.

Fleet depots consolidate orders for 12v air conditioning so the fitter works to torque values rather than habit.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files.

Reorder signals for yz-4003-2 are tracked against your last three off-takes to keep the shelf covered. Batch F586CC42.

The unit leaves the line only after a second visual check.

Export dunnage keeps the housing from scuffing in transit.

Gallery images show the actual unit from the current production batch, not renders.

Specifications

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference yz-4003-2 carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch F586CC42.

Ratings on the carton label mirror the table above.

Any blank field can be checked on a unit within one day.

Overview

The 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change belongs to our Car Jack range and is stocked for same-day wholesale dispatch. Buyers choose this fuel pump for its OE-grade build . Fleet managers value the consistent actuation and the 12-month warranty; repair shops value the direct-fit dimensions that cut bench time; importers value the stable wholesale lead time and the documented specification.

Every figure on this page is stated from the production specification, so what you read is what ships. The Car Jack category is built for professional buyers who need repeatable quality, not a one-off bargain.

Related references: Car Jack category · product detail · warranty policy · shipping policy · our brand

Distributors book stock against car jack 12v to avoid a second bench visit.

Fitment checks for car jack 12v run through part number yz-4003-2 before the carton is sealed.

Workshops hold shelf space for car jack 12v to cut diagnostic time on repeat failures.

Service centres forecast demand for fuel pump 12v with the specification sheet packed on top.

Fitment checks for fuel pump 12v run through part number yz-4003-2 before the carton is sealed.

Export agencies consolidate orders for fuel pump 12v to keep the spare list short.

Parts desks specify automotive car jack 12v and confirm the reference at dispatch.

Fitment checks for automotive car jack 12v run through part number yz-4003-2 before the carton is sealed.

Garage groups quote volumes for automotive car jack 12v because the batch record travels with the carton.

Reference yz-4003-2 is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this Fuel Pump include the applications in the fitment table — confirm the reference yz-4003-2 against the unit you remove. Batch F586CC42.

The same specification serves retail shelves and fleet depots.

Quotes are locked to the specification revision on the sheet.

A repeatable specification is what turns a one-time order into a supply agreement.

Technical specification

Each fuel pump is inspected against the original equipment drawing before packing. Tight tolerances keep the unit stable through thermal cycling. The electrical rating is validated across the temperature range. Dimensions are per the OE drawing. These figures come from the production specification and are confirmed on the bench, never guessed. Where a value is not confirmed we leave it blank rather than state a number we cannot stand behind.

The fuel pump is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.

The Certification of TUV matters because it shows the compliance the unit can be documented against.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated electrical condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.

Rebuilders forecast demand for 12v yz rating because a documented spec shortens receiving-line QC.

Fitment checks for 12v yz rating run through part number yz-4003-2 before the carton is sealed.

Trade counters book stock against 12v yz rating to avoid a second bench visit.

Importers standardise on 12v yz specification to cut diagnostic time on repeat failures.

Fitment checks for 12v yz specification run through part number yz-4003-2 before the carton is sealed.

Wholesale partners quote volumes for 12v yz specification with the specification sheet packed on top.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to yz-4003-2 before quoting. Batch F586CC42.

Dimensional checks sample every production lot, not just the first.

Material grade certificates accompany volume shipments.

Thermal cycling and vibration tests run per production batch, not per sample year.

Materials are certified to the drawing grade, with mill certificates on file.

Fitment

Fitment verification

Confirm the engine code plate and the part number YZ-4003-2 before purchase. This fuel pump fits the applications in our fitment list. Reference model: YZ-4003-2. If your vehicle is not listed, send the VIN or engine code on WhatsApp for a free check.

Match the old part side by side: stamping, connector shape, and mounting points must agree. A wrong revision will not seat and may damage the surrounding circuit.

Typical fitment scenarios for the fuel pump: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm YZ-4003-2 against the old stamping.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

Fleet depots keep records for 12v for yz so warranty claims stay simple.

Fitment checks for 12v for yz run through part number yz-4003-2 before the carton is sealed.

Volume buyers specify 12v for yz and confirm the reference at dispatch.

Workshops standardise on yz 12v to avoid a second bench visit.

Fitment checks for yz 12v run through part number yz-4003-2 before the carton is sealed.

Distributors forecast demand for yz 12v because a documented spec shortens receiving-line QC.

Export agencies consolidate orders for 12v yz replacement so the shelf never dips before the reorder lands.

Fitment checks for 12v yz replacement run through part number yz-4003-2 before the carton is sealed.

Service centres specify 12v yz replacement to keep the spare list short.

The carton for reference yz-4003-2 is drop-tested to the transport standard before the lane is approved.

Lead time for yz-4003-2 is quoted against stock already on the shelf at China, Dongguan. Batch F586CC42.

Model-year splits are flagged on the quotation when they matter.

The fitment answer always cites a part number, never a photo.

Cross reference

Cross reference

Reference numbers for this fuel pump: YZ-4003-2. Cross-reference to AYZ where applicable. Cross numbers help you match the old part when the stamping has worn.

We publish only the numbers we have confirmed. Cross numbers we have not checked are left off the page. When in doubt, send a photo of the old part and we will confirm the match before you pay.

Garage groups hold shelf space for 12v fits yz and confirm the reference at dispatch.

Fitment checks for 12v fits yz run through part number yz-4003-2 before the carton is sealed.

Parts desks keep records for 12v fits yz so warranty claims stay simple.

Trade counters consolidate orders for yz series 12v so the fitter works to torque values rather than habit.

Fitment checks for yz series 12v run through part number yz-4003-2 before the carton is sealed.

Rebuilders standardise on yz series 12v to avoid a second bench visit.

Reorder signals for yz-4003-2 are tracked against your last three off-takes to keep the shelf covered.

The drawing revision behind yz-4003-2 is recorded on the test sheet packed with each carton. Batch F586CC42.

Key features

• OE-drawing dimensions for direct fit
• OE-grade materials
• Stable electrical rating
• Leak-tested before packing
• 12-month warranty
• Wholesale and B2B supply

Beyond the list, the fuel pump is chosen for repeatable quality across a batch. Importers receive the same specification on every carton, which keeps warranty claims low and rebuilds predictable.

Wholesale partners quote volumes for heavy duty 12v to cut diagnostic time on repeat failures.

Fitment checks for heavy duty 12v run through part number yz-4003-2 before the carton is sealed.

Importers keep records for heavy duty 12v so the shelf never dips before the reorder lands.

Reference yz-4003-2 carries the same warranty terms as the rest of the Vidishi Auto wholesale range.

Installers fitting this Fuel Pump on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit. Batch F586CC42.

Feature wording mirrors what the production line can verify.

Symptoms & engineering

Engineering notes

The 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change is designed around the original equipment geometry so the fuel pump seats without modification. Tight tolerances keep the unit stable under thermal cycling. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench. Common failure signs that point to replacement are intermittent operation, loss of pressure, and visible leakage at the seal. Replace on a clean bench and torque to the OE spec. These notes are derived from the production drawing and bench test, not from generic copy. We do not over-state performance: every rating on this page comes from the production specification.

A worn fuel pump typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the fuel pump when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.

Store the new fuel pump in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Verified details held on file by our technical desk: 5-ton (11, 023 lb) rated lifting capacity; powers most cars, sedans, SUVs, MPVs and light trucks.. Powered by a 12V DC source (car battery or cigarette lighter); fully automatic hydraulic lift reaches maximum height in under 2 minutes.. Lift range on comparable 5-ton 12V electric jack kits is about 6.1-17.7 in (155-450 mm), fitting most vehicles.. Kit bundles a built-in tire inflator / air compressor (typically up to 150 PSI) and a 1/2 in 12V electric impact wrench (max torque about 420 N.m) for tire changes..

Volume buyers book stock against 12v car jack catalog to keep the spare list short.

Fitment checks for 12v car jack catalog run through part number yz-4003-2 before the carton is sealed.

Fleet depots hold shelf space for 12v car jack catalog and confirm the reference at dispatch.

Distributors quote volumes for 12v yz spec because the batch record travels with the carton.

Fitment checks for 12v yz spec run through part number yz-4003-2 before the carton is sealed.

Workshops consolidate orders for 12v yz spec so the fitter works to torque values rather than habit.

Applications for this Fuel Pump include the applications in the fitment table — confirm the reference yz-4003-2 against the unit you remove.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing. Batch F586CC42.

Installation

1. Disconnect power and relieve system pressure.
2. Remove the old fuel pump after noting the part number YZ-4003-2.
3. Clean the seat and check for debris or worn seals.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Installation difficulty is moderate. If unsure, use a qualified technician. Keep the old part until you confirm the new unit behaves correctly.

Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new fuel pump will fail the same way.

Service centres specify 12v yz dimensions so the shelf never dips before the reorder lands.

Importers keep records for 12v yz dimensions and confirm the reference at dispatch.

Export agencies hold shelf space for 12v yz dimensions to cut diagnostic time on repeat failures.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to yz-4003-2 before quoting.

Fleets running the applications in the fitment table standardise on reference yz-4003-2 to keep the spare list short. Batch F586CC42.

The removal sequence is the reverse of the fitment sequence.

Anti-tamper fasteners are noted on the installation sheet.

Torque values and sequence come from the vehicle service manual, not from habit.

Warranty

Every fuel pump carries a 1year warranty from the date of purchase. The warranty covers manufacturing defects, not misuse or incorrect fitment. Keep the order number and part number YZ-4003-2 for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

Parts desks forecast demand for 12v warranty with the specification sheet packed on top.

Fitment checks for 12v warranty run through part number yz-4003-2 before the carton is sealed.

Garage groups book stock against 12v warranty so warranty claims stay simple.

Lead time for yz-4003-2 is quoted against stock already on the shelf at China, Dongguan.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files. Batch F586CC42.

Claim turnaround is counted in days, with tracking you can see.

Serial numbers are logged so replacements match the original spec.

Claims are handled by part number with a photo of the unit and the vehicle details.

Wholesale & B2B

We supply 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change in wholesale and B2B quantities with tiered pricing. Minimum order is 20 pieces. Request a quote on WhatsApp for volume discounts and lead time. OEM and ODM customization is available on request, including private labelling and custom connectors.

Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.

Rebuilders specify 12v wholesale so the fitter works to torque values rather than habit.

Fitment checks for 12v wholesale run through part number yz-4003-2 before the carton is sealed.

Trade counters quote volumes for 12v wholesale because the batch record travels with the carton.

Importers keep records for 12v bulk supply because a documented spec shortens receiving-line QC.

Fitment checks for 12v bulk supply run through part number yz-4003-2 before the carton is sealed.

Wholesale partners book stock against 12v bulk supply so the shelf never dips before the reorder lands.

Fleet depots standardise on 12v manufacturer china to keep the spare list short.

Fitment checks for 12v manufacturer china run through part number yz-4003-2 before the carton is sealed.

Volume buyers forecast demand for 12v manufacturer china with the specification sheet packed on top.

The drawing revision behind yz-4003-2 is recorded on the test sheet packed with each carton.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch F586CC42.

Price breaks are published for the standard quantity steps.

Blanket orders can be called off against a monthly schedule.

MOQ, tier pricing, and lead time are confirmed in writing before the first carton.

Shipping

Orders ship from China, Dongguan. Packaged shipping weight is stated per the carton. We use sea, air, and express options. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

Workshops keep records for 12v shipping so warranty claims stay simple.

Fitment checks for 12v shipping run through part number yz-4003-2 before the carton is sealed.

Distributors specify 12v shipping so the fitter works to torque values rather than habit.

Export agencies hold shelf space for 12v air freight to avoid a second bench visit.

Fitment checks for 12v air freight run through part number yz-4003-2 before the carton is sealed.

Service centres forecast demand for 12v air freight because a documented spec shortens receiving-line QC.

Garage groups consolidate orders for 12v export carton with the specification sheet packed on top.

Fitment checks for 12v export carton run through part number yz-4003-2 before the carton is sealed.

Parts desks standardise on 12v export carton to keep the spare list short.

Installers fitting this Fuel Pump on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit.

Reference yz-4003-2 is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch F586CC42.

Dangerous-goods rules are checked before any air booking.

Consolidated shipments share one bill of lading per buyer.

Brand & reference

This fuel pump is supplied under the Vidishi Auto brand, a compatible replacement referencing AYZ. Vidishi Auto is the responsible brand for specification and warranty. AYZ is named only as the original reference make, not as the manufacturer. We are not affiliated with the original brand owner.

Using a reference brand name helps buyers find the right replacement; it does not imply endorsement by or partnership with that brand.

Trade counters hold shelf space for ayz 12v parts and confirm the reference at dispatch.

Fitment checks for ayz 12v parts run through part number yz-4003-2 before the carton is sealed.

Rebuilders keep records for ayz 12v parts because the batch record travels with the carton.

Wholesale partners book stock against ayz 12v wholesale because a documented spec shortens receiving-line QC.

Fitment checks for ayz 12v wholesale run through part number yz-4003-2 before the carton is sealed.

Importers standardise on ayz 12v wholesale to avoid a second bench visit.

Volume buyers quote volumes for ayz auto 12v to cut diagnostic time on repeat failures.

Fitment checks for ayz auto 12v run through part number yz-4003-2 before the carton is sealed.

Fleet depots consolidate orders for ayz auto 12v with the specification sheet packed on top.

Distributors book stock against 12v ayz supplier so warranty claims stay simple.

Fitment checks for 12v ayz supplier run through part number yz-4003-2 before the carton is sealed.

Workshops hold shelf space for 12v ayz supplier and confirm the reference at dispatch.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part. Batch F586CC42.

The reference maker is named only where fitment requires it.

FAQ

Service centres forecast demand for 12v moq price because the batch record travels with the carton.

Fitment checks for 12v moq price run through part number yz-4003-2 before the carton is sealed.

Export agencies consolidate orders for 12v moq price because a documented spec shortens receiving-line QC.

Fleets running the applications in the fitment table standardise on reference yz-4003-2 to keep the spare list short.

The carton for reference yz-4003-2 is drop-tested to the transport standard before the lane is approved. Batch F586CC42.

Each answer names the document the figure comes from.

New questions are folded back into this section as they arrive.

Data & compliance

How we label data

Every figure on this page is stated from the production specification, or left blank where it is not confirmed. That keeps the published data honest.

This product is a compatible replacement and is not endorsed by the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Parts desks specify 12v quality test so the shelf never dips before the reorder lands.

Fitment checks for 12v quality test run through part number yz-4003-2 before the carton is sealed.

Garage groups quote volumes for 12v quality test to cut diagnostic time on repeat failures.

Rebuilders forecast demand for 12v certification and confirm the reference at dispatch.

Fitment checks for 12v certification run through part number yz-4003-2 before the carton is sealed.

Trade counters book stock against 12v certification so warranty claims stay simple.

Importers standardise on 12v inspection report so the fitter works to torque values rather than habit.

Fitment checks for 12v inspection report run through part number yz-4003-2 before the carton is sealed.

Wholesale partners quote volumes for 12v inspection report to avoid a second bench visit.

Fleet depots keep records for 12v oem standard to cut diagnostic time on repeat failures.

Fitment checks for 12v oem standard run through part number yz-4003-2 before the carton is sealed.

Volume buyers specify 12v oem standard so the shelf never dips before the reorder lands.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files.

Reorder signals for yz-4003-2 are tracked against your last three off-takes to keep the shelf covered. Batch F586CC42.

Nothing on the page overstates what the bench has verified.

Compatibility is claimed only where a part number confirms it.

Data fields left blank are those the line has not verified, by policy.

Published numbers are the same ones printed on the carton label.

Support

Need help with 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (YZ-4003-2) so repeat orders are fast.

We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and YZ-4003-2 and we will process it on the same line you ordered from.

Workshops standardise on 12v factory direct to keep the spare list short.

Fitment checks for 12v factory direct run through part number yz-4003-2 before the carton is sealed.

Distributors forecast demand for 12v factory direct and confirm the reference at dispatch.

Export agencies consolidate orders for 12v sea freight because the batch record travels with the carton.

Fitment checks for 12v sea freight run through part number yz-4003-2 before the carton is sealed.

Service centres specify 12v sea freight so the fitter works to torque values rather than habit.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference yz-4003-2 carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch F586CC42.

Order history is attached to the part-number record.

Car Jack fitment & spec match

This fuel pump is matched to the application before it ships: 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change. Confirm 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change against your vehicle, and cross-check YZ-4003-2 with the old part so the replacement seats correctly on the first try.

• Part type: Fuel Pump.
• Material: the supplied.
• Reference: YZ-4003-2.
• Supplied by AYZ, built to the production drawing.

Where the fitment list is long, match by year, model, and engine before ordering; a five-minute check prevents a return and keeps the right part on the shelf.

Garage groups hold shelf space for 12v fast delivery to avoid a second bench visit.

Volume buyers book stock against 12v fast delivery and confirm the reference at dispatch.

Parts desks keep records for 12v fast delivery to cut diagnostic time on repeat failures.

Reference yz-4003-2 is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this Fuel Pump include the applications in the fitment table — confirm the reference yz-4003-2 against the unit you remove. Batch F586CC42.

Car Jack install & torque

Set the jack on a flat, rated surface and chalk the wheels; reused fasteners are the usual cause of comeback, so replace them with the the supplied grade called out on the drawing. AYZ ships the part to the production tolerance, and YZ-4003-2 is the number to quote for the matching hardware.

Work on a clean bench, protect the mating faces, and keep 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change in view so the next technician reorders the same unit without guessing. 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change before you commit to the order.

Trade counters consolidate orders for car jack 12v range with the specification sheet packed on top.

Distributors forecast demand for car jack 12v range because a documented spec shortens receiving-line QC.

Rebuilders standardise on car jack 12v range to keep the spare list short.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to yz-4003-2 before quoting. Batch F586CC42.

Car Jack verification

before load, confirm the saddle is centred and the safety lock engaged. A the supplied part held to tolerance gives the same service life as the original, and YZ-4003-2 is the number to log for warranty and repeat orders.

Document the reading or clearance you set for 3 in 1 12V 5 Ton Electric Car Hydraulic Jack with Air Pump and Electric Impact Wrench, for Tire Change, keep the record with the job card, and the next rebuild starts from a known-good baseline instead of a guess.

Wholesale partners quote volumes for 12v solenoid so the fitter works to torque values rather than habit.

Service centres specify 12v solenoid to cut diagnostic time on repeat failures.

Importers keep records for 12v solenoid because the batch record travels with the carton.

The carton for reference yz-4003-2 is drop-tested to the transport standard before the lane is approved.

Lead time for yz-4003-2 is quoted against stock already on the shelf at China, Dongguan. Batch F586CC42.

Matching parts are quoted together so wear items ship as a set.

Field teardown photos inform the next revision of the sheet.

Application notes for this unit type are written from bench records, not brochures.