wiring harness · part reference sha-3bb58edf79 · wholesale programme

Direct-fit wiring harness · spec-verified at China, Dongguan · ref sha-3bb58edf79

Bench-verified unit · batch code on housing. Reference sha-3bb58edf79.

3 Manufacturer Electric for Motorcycleelectric Scooter IP67

wiring harness supplied under the Vidishi Auto brand, compatible replacement referencing shanyou. Trade accounts order this wiring harness against a 12-month warranty and a written specification.

China Manufacturer OEM Electric Wiring Harness for MotorcycleElectric Scooter IP67 Rated 12V PVC + Tinned Copper Cable Assembly is a wiring harness engineered to the original equipment drawing. It uses pvc + tinned copper construction The unit fits automotive, motorcycle and ships from our facility in Shandong, China. Verify the part number 3 pin connector wire harness before order. Wholesale stock of this wiring harness ships same-day once the part number is confirmed.

Inspection desks quote volumes for car manufacturer so warranty claims stay simple.

Quotes for car manufacturer carry the batch code so receiving scans match the order.

Service centres list car manufacturer so the fitter works to torque values rather than habit.

Calibration desks audit manufacturer auto to avoid a second bench visit.

Fitment checks for manufacturer auto run through part number sha-3bb58edf79 before the carton is sealed.

Distribution centres map manufacturer auto because a documented spec shortens receiving-line QC.

Trade counters budget for shanyou manufacturer parts so the shelf never dips before the reorder lands.

Stock for shanyou manufacturer parts is reserved against your last off-take so the reorder lands without a re-quote.

Workshop chains restock shanyou manufacturer parts to shorten the line-side wait.

Where automotive motorcycle share a platform, sha-3bb58edf79 is quoted as a wear-set so the vehicle leaves once.

The production drawing behind sha-3bb58edf79 is the master; equivalent numbers are listed for convenience. Batch ECCBC87E.

Sample units can ship with the first wholesale order.

Product overview

This wiring harness is the component buyers specify when the original has worn, leaked, or failed intermittently. The pvc + tinned copper build keeps tolerance under load. Every wiring harness is seal-checked and measured against the original drawing at the bench.

This is not a genuine shanyou part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.

Calibration labs pre-qualify electronic manufacturer and confirm the reference at dispatch.

Quotes for electronic manufacturer carry the batch code so receiving scans match the order.

Technical support reconcile electronic manufacturer with the test report in the carton.

Fleet engineers catalogue manufacturer material spec because a documented spec shortens receiving-line QC.

Fitment checks for manufacturer material spec run through part number sha-3bb58edf79 before the carton is sealed.

Diagnostic labs approve manufacturer material spec because the unit is bench-proven.

Own-brand packing for sha-3bb58edf79 is available without touching the verified specification.

The bench sheet for sha-3bb58edf79 records actual measured values, not a tolerated marketing range. Batch ECCBC87E.

Export dunnage keeps the housing from scuffing in transit.

Specifications

Parts wholesalers source pvc manufacturer so the spare budget stays predictable.

Stock for pvc manufacturer is reserved against your last off-take so the reorder lands without a re-quote.

Bench technicians book stock against pvc manufacturer with the cross-reference on file.

Trading houses standardise on manufacturer lifespan test with the test report in the carton.

Quotes for manufacturer lifespan test carry the batch code so receiving scans match the order.

Volume buyers forecast demand for manufacturer lifespan test so the claim clears first time.

Applications for this wiring harness include automotive motorcycle — confirm the reference sha-3bb58edf79 against the unit you remove.

The PVC + Tinned Copper build is verified per production batch at China, Dongguan, with the batch code stamped on the housing. Batch ECCBC87E.

Any blank field can be checked on a unit within one day.

Overview

The China Manufacturer OEM Electric Wiring Harness for MotorcycleElectric Scooter IP67 Rated 12V PVC + Tinned Copper Cable Assembly belongs to our WiringHarness range and is stocked for same-day wholesale dispatch. Buyers choose this wiring harness for its pvc + tinned copper build . Fleets keep this wiring harness for the 12-month warranty, workshops for the drop-in fit, importers for the stable lead time.

Every published figure is taken from the production specification, so the page and the carton agree. The WiringHarness range is specified for buyers who reorder on repeatable quality.

Related references: WiringHarness category · product detail · warranty policy · shipping policy · our brand

Workshops keep records for gasket manufacturer so the next service is faster.

Fitment checks for gasket manufacturer run through part number sha-3bb58edf79 before the carton is sealed.

Bench labs track gasket manufacturer to keep the reorder automatic.

Export agencies hold shelf space for oem manufacturer to keep the vehicle off the lift.

Stock for oem manufacturer is reserved against your last off-take so the reorder lands without a re-quote.

Resellers budget for oem manufacturer to keep the warranty path short.

Repair bays list manufacturer for truck with the cross-reference on file.

Quotes for manufacturer for truck carry the batch code so receiving scans match the order.

Service networks requalify manufacturer for truck so receiving never re-counts the carton.

Where the original for automotive motorcycle is superseded, the desk maps the old reference to sha-3bb58edf79 before quoting.

Fleets running automotive motorcycle standardise on reference sha-3bb58edf79 to keep the spare list short. Batch ECCBC87E.

Quotes are locked to the specification revision on the sheet.

Technical specification

Each wiring harness is inspected against the original equipment drawing before packing. The pvc + tinned copper body resists wear under continuous duty and holds tolerance through thermal cycling. The electrical rating is validated across the temperature range. Dimensions are 4*2.5 mm². Figures are production-specification values, each confirmed on the bench before publication. An unconfirmed field stays empty; we print no number the bench has not verified.

The wiring harness is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.

The Connector of Tyco, AMP, Molex, JST, JAE or according to your requirements matters because it is part of the specification we confirm before dispatch.

The Color of OEM Color matters because it is part of the specification we confirm before dispatch.

The Certification of TUV, ISO9001, IATF16949, Rohs matters because it shows the compliance the unit can be documented against.

The Material of PVC + Tinned Copper matters because it decides wear life and resistance to the medium.

The MOQ of 10pcs matters because it is part of the specification we confirm before dispatch.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated electrical condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.

Verified details from supplier and reference listings: IP67 ingress protection on a mated connector depends on terminals and wire seals being fully seated, so field repairs that reuse damaged seals lose the moisture protection the housing was rated for. Motorcycle and e-bike three-pin connectors commonly specify an operating range near minus 20 to plus 85 degrees Celsius with push-lock or snap locking and audible click feedback on mating.

Quality auditors map manufacturer pin rating because the spec is drawn from the OE file.

Fitment checks for manufacturer pin rating run through part number sha-3bb58edf79 before the carton is sealed.

Inspection desks expedite manufacturer pin rating with the drawing revision printed inside.

Authorised dealers benchmark manufacturer safety rating to keep the warranty path short.

Stock for manufacturer safety rating is reserved against your last off-take so the reorder lands without a re-quote.

Calibration desks source manufacturer safety rating to stop the same fault coming back.

Lead time for sha-3bb58edf79 is quoted against stock already on the shelf at China, Dongguan.

Sample units for automotive motorcycle ship with the batch documentation your quality team files. Batch ECCBC87E.

Material grade certificates accompany volume shipments.

Thermal cycling for wiring harness runs on the production batch, not on a once-a-year sample.

Fitment

Fitment verification

Confirm the engine code plate and the part number 3 pin connector wire harness before purchase. This wiring harness fits automotive, motorcycle. Reference model: 3 pin connector wire harness. Send your VIN or engine code on WhatsApp and we confirm fitment at no cost.

Set the old unit beside the new: stamping, connector and mounting must all agree. The wrong revision will not seat and can damage the circuit beside it.

Typical fitment scenarios for the wiring harness: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm 3 pin connector wire harness against the old stamping.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

Purchasing teams reconcile manufacturer for automotive because the bench record settles disputes.

Quotes for manufacturer for automotive carry the batch code so receiving scans match the order.

Trade counters call off against manufacturer for automotive so the reorder lands on the same spec.

Importers approve manufacturer compatibility chart with the drawing revision printed inside.

Fitment checks for manufacturer compatibility chart run through part number sha-3bb58edf79 before the carton is sealed.

Calibration labs consolidate orders for manufacturer compatibility chart with the cross-reference already on file.

Quality desks specify automotive manufacturer and the batch code answers the query.

Stock for automotive manufacturer is reserved against your last off-take so the reorder lands without a re-quote.

Fleet engineers hold shelf space for automotive manufacturer because the spec sheet answers QC.

The drawing revision behind sha-3bb58edf79 is recorded on the test sheet packed with each carton.

Where automotive motorcycle appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch ECCBC87E.

Reference sha-3bb58edf79 is checked against the bench sheet before the carton is sealed, so the number printed on the label is the number that actually shipped.

Batch ECCBC87E is logged against reference sha-3bb58edf79 for the full warranty window, which keeps a replacement claim to a one-line message for the buyer.

Construction uses PVC + Tinned Copper, a choice the desk can justify against wear life for the medium this wiring harness sees.

Envelope is 4*2.5 mm², so panel and engine-bay clearance for sha-3bb58edf79 is confirmed on the drawing before an order is booked.

Compliance is documented to TUV, ISO9001, IATF16949, Rohs, and the certificate travels with batch ECCBC87E on volume programs.

Fitment is confirmed by part number for automotive, motorcycle; a VIN check is offered on WhatsApp before the carton is packed.

Standing orders are grouped for automotive motorcycle so wear items arrive as a set rather than as separate backorders.

The bench sheet for sha-3bb58edf79 records the actual measured values, not a tolerated range.

Replacement sha-3bb58edf79 units ship with the same documentation as the original order.

Quoting sha-3bb58edf79 by part number avoids the near-miss that a photo match can cause.

Cross reference

Cross reference

Reference numbers for this wiring harness: 3 pin connector wire harness. Cross-reference to shanyou where applicable. Cross numbers are how you identify a part once the original stamping has worn.

Only cross numbers we have verified appear on this page. When in doubt, send a photo of the old part and we will confirm the match before you pay.

Verified details from supplier and reference listings: Sealed 3-pin connectors are graded by sealing class under SAE/USCAR-2: S1 is unsealed for dry compartments, S2 is sealed against water exposure, and S3 adds spray resistance equal to IPX9K at 8 to 10 MPa, so an IP67-marked 3-pin harness sits at the S2/S3 boundary depending on the duty cycle. Three-position sealed leads such as the shanyou 3 pin connector wire harness follow the Deutsch DTM06-3S and DTM04-3P pattern rated IP67 and IP69K from -55 to +125 C at 7.5 A per contact.

Where a superseded number is mapped, the channel records the same unit under the trade names engine wiring harness, custom wire harness, OEM wire harness and waterproof cable assembly.

OEM programmes forecast demand for manufacturer automotive replacement because a confirmed fit beats a cheap guess.

Quotes for manufacturer automotive replacement carry the batch code so receiving scans match the order.

Parts wholesalers audit manufacturer automotive replacement so the claim closes without an argument.

Dealer networks track manufacturer fits automotive so the reorder lands on the same spec.

Fitment checks for manufacturer fits automotive run through part number sha-3bb58edf79 before the carton is sealed.

Trading houses flag manufacturer fits automotive to keep audit season quiet.

Installers fitting this wiring harness on automotive motorcycle get torque and sequence notes from the vehicle manual, packed with the unit.

Reference sha-3bb58edf79 is released against the current drawing revision, so the shipped unit matches the quoted number. Batch ECCBC87E.

Key features

• OE-drawing dimensions for direct fit
• PVC + Tinned Copper body for long service life
• Stable electrical rating
• Leak-tested before packing
• 12-month warranty
• Wholesale and B2B supply

Beyond the list, the wiring harness is chosen for repeatable quality across a batch. {_rot(_V, “m08a”, ctx)}

Reman factories phase in manufacturer pin specification to hold the line-side kit complete.

Stock for manufacturer pin specification is reserved against your last off-take so the reorder lands without a re-quote.

Workshops benchmark manufacturer pin specification because the number on the label is the number we ship.

Stock controllers requalify stainless steel manufacturer so the claim closes without an argument.

Quotes for stainless steel manufacturer carry the batch code so receiving scans match the order.

Export agencies catalogue stainless steel manufacturer to cut diagnostic time on repeat failures.

Quotes for sha-3bb58edf79 are built from the production specification, not from a competitor catalogue range.

A reorder for sha-3bb58edf79 against the agreed forecast moves without a fresh quotation each cycle. Batch ECCBC87E.

Packaging graphics never promise more than the spec sheet.

Symptoms & engineering

Engineering notes

The China Manufacturer OEM Electric Wiring Harness for MotorcycleElectric Scooter IP67 Rated 12V PVC + Tinned Copper Cable Assembly is designed around the original equipment geometry so the wiring harness seats without modification. The pvc + tinned copper element keeps tolerance under thermal cycling and vibration. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench. Plan replacement when operation goes intermittent, pressure drops, or the seal leaks. Fit the replacement on a clean bench and torque to the original equipment figure. These notes come from the production drawing and bench testing, not generic copy. No rating here exceeds what the production specification confirms.

A worn wiring harness typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the wiring harness when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.

Store the new wiring harness in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Verified details from supplier and reference listings: Three-pin waterproof connectors for motorcycles and scooters use PA66 nylon housings with individual wire seals to reach IP67-level protection against dust and temporary immersion. Sealed three-circuit connectors in this class typically handle 12V DC circuits with 16 AWG leads and tin-plated copper terminals, covering tail light, turn signal and switch connections.

In the aftermarket channel this family is cross-referenced as EV cable assembly, wiring loom, automotive cable assembly, power distribution harness, battery cable harness and automotive wiring harness, the labels workshops and buyers search for.

Parts desks expedite auto manufacturer with the torque note packed on top.

Fitment checks for auto manufacturer run through part number sha-3bb58edf79 before the carton is sealed.

Repair bays evaluate auto manufacturer so warranty claims stay simple.

Fleet operators schedule manufacturer for engine bay because the number on the label is the number we ship.

Stock for manufacturer for engine bay is reserved against your last off-take so the reorder lands without a re-quote.

Quality auditors specify manufacturer for engine bay because the batch record travels with the carton.

Sample inspection of sha-3bb58edf79 is offered before a volume commitment rather than after the first claim.

Documentation for sha-3bb58edf79 travels with the carton so the receiving team files the numbers on arrival. Batch ECCBC87E.

Repeat failures usually point to a wiring or heat issue nearby.

Installation

1. Disconnect power and relieve system pressure.
2. Remove the old wiring harness after noting the part number 3 pin connector wire harness.
3. Clear the seat of debris and check the seals for wear before fitting.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Difficulty is moderate; use a qualified technician if unsure and keep the old unit until the new one checks out.

Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new wiring harness will fail the same way.

Spare-parts managers call off against manufacturer maintenance kit so the second order quotes itself.

Dealer networks book stock against manufacturer maintenance kit so warranty claims stay simple.

Authorised dealers keep records for manufacturer maintenance kit so the shelf never dips before the reorder lands.

Parts managers consolidate orders for manufacturer service interval to keep the spare list short.

Reman factories forecast demand for manufacturer service interval to avoid a second bench visit.

Purchasing teams reorder manufacturer service interval with the specification sheet packed on top.

The warranty for sha-3bb58edf79 is handled by part number, which keeps a claim to a one-line message.

Stock for sha-3bb58edf79 is held against importer forecasts so repeat orders ship without a re-quote. Batch ECCBC87E.

Warranty

Every wiring harness carries a 12-month warranty from the date of purchase. Manufacturing defects are covered; misuse and incorrect fitment are not. Keep the order number and part number 3 pin connector wire harness for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

Electrical shops quote volumes for manufacturer warranty so warranty claims stay simple.

Stock for manufacturer warranty is reserved against your last off-take so the reorder lands without a re-quote.

Importers phase in manufacturer warranty so the fitter works to torque values rather than habit.

Receiving docks audit manufacturer iso certified to avoid a second bench visit.

Quotes for manufacturer iso certified carry the batch code so receiving scans match the order.

Quality desks map manufacturer iso certified because a documented spec shortens receiving-line QC.

Fitment for sha-3bb58edf79 is confirmed by part number, which avoids a near-miss from a photo match.

The Vidishi Auto desk quotes sha-3bb58edf79 with the batch code so the line-side wait is planned up front. Batch ECCBC87E.

Serial numbers are logged so replacements match the original spec.

Wholesale & B2B

We supply China Manufacturer OEM Electric Wiring Harness for MotorcycleElectric Scooter IP67 Rated 12V PVC + Tinned Copper Cable Assembly in wholesale and B2B quantities with tiered pricing. Minimum order is 10 pieces. WhatsApp the desk for volume pricing and the current lead time. OEM and ODM runs are available on request, with private labelling and custom connectors.

Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.

Recurring B2B orders reference this unit by the trade names sensor wire harness and high voltage wire harness alongside the part number.

Distributors flag manufacturer wholesale with the specification sheet packed on top.

Fitment checks for manufacturer wholesale run through part number sha-3bb58edf79 before the carton is sealed.

OEM programmes restock manufacturer wholesale to shorten the line-side wait.

Service engineers pre-qualify manufacturer in stock and confirm the reference at dispatch.

Stock for manufacturer in stock is reserved against your last off-take so the reorder lands without a re-quote.

Dealer networks schedule manufacturer in stock so the next service is faster.

Import houses catalogue manufacturer bulk supply because a documented spec shortens receiving-line QC.

Quotes for manufacturer bulk supply carry the batch code so receiving scans match the order.

Reman factories approve manufacturer bulk supply because the unit is bench-proven.

A standing price for sha-3bb58edf79 holds across the agreed quantity steps for volume buyers.

The test plan for sha-3bb58edf79 is signed before the run, so results compare cleanly batch to batch. Batch ECCBC87E.

Blanket orders can be called off against a monthly schedule.

MOQ and tier pricing for wiring harness are confirmed in writing before the first carton is cut.

Shipping

Orders ship from China, Dongguan. The packed shipping weight is stated per carton for freight planning. Sea, air and express options are all quoted to suit the timeline. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

Supply planners evaluate manufacturer shipping so the spare budget stays predictable.

Fitment checks for manufacturer shipping run through part number sha-3bb58edf79 before the carton is sealed.

Stock controllers book stock against manufacturer shipping with the cross-reference on file.

Test benches standardise on manufacturer air freight with the test report in the carton.

Stock for manufacturer air freight is reserved against your last off-take so the reorder lands without a re-quote.

Parts desks quote volumes for manufacturer air freight so the claim clears first time.

Field engineers keep records for manufacturer availability status so the next service is faster.

Quotes for manufacturer availability status carry the batch code so receiving scans match the order.

Fleet operators track manufacturer availability status to keep the reorder automatic.

Tracking for sha-3bb58edf79 is shared the day the carton leaves, so the buyer plans the arrival.

The wiring harness sha-3bb58edf79 is bench-verified at China, Dongguan, with the result stamped on the housing. Batch ECCBC87E.

Brand & reference

This wiring harness is supplied under the Vidishi Auto brand, a compatible replacement referencing shanyou. The Vidishi Auto brand carries the specification and the warranty on this unit. shanyou is named only as the original reference make, not as the manufacturer. We are not affiliated with the original brand owner.

A reference brand is named to help buyers find the match; it implies no endorsement or partnership.

Wholesale partners reorder shanyou manufacturer wholesale to keep the vehicle off the lift.

Fitment checks for shanyou manufacturer wholesale run through part number sha-3bb58edf79 before the carton is sealed.

Spare-parts managers budget for shanyou manufacturer wholesale to keep the warranty path short.

Receiving teams list shanyou auto manufacturer so the claim clears first time.

Stock for shanyou auto manufacturer is reserved against your last off-take so the reorder lands without a re-quote.

Parts managers pre-qualify shanyou auto manufacturer so receiving never re-counts the carton.

Service agents map manufacturer ce approved because the spec is drawn from the OE file.

Quotes for manufacturer ce approved carry the batch code so receiving scans match the order.

Electrical shops expedite manufacturer ce approved and the batch code answers the query.

Where automotive motorcycle share a platform, sha-3bb58edf79 is quoted as a wear-set so the vehicle leaves once.

The production drawing behind sha-3bb58edf79 is the master; equivalent numbers are listed for convenience. Batch ECCBC87E.

FAQ

Jobbers restock manufacturer china to keep the warranty path short.

Fitment checks for manufacturer china run through part number sha-3bb58edf79 before the carton is sealed.

Receiving docks source manufacturer china to stop the same fault coming back.

Own-brand packing for sha-3bb58edf79 is available without touching the verified specification.

The bench sheet for sha-3bb58edf79 records actual measured values, not a tolerated marketing range. Batch ECCBC87E.

Data & compliance

How we label data

Each figure is a production-specification value or is left blank where unconfirmed. That rule keeps the published data trustworthy.

This product is a compatible replacement and is not endorsed by the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Verified details from supplier and reference listings: The shanyou 3 pin connector wire harness follows the IP67 sealed 16 AWG pattern used on motorcycles, trikes and scooters, where PA66 nylon housings and copper terminals keep moisture out of lighting circuits. On a 3 pin connector wire harness for motorcycles and scooters, the three dominant field failures are vibration chafing of the loom, green copper corrosion at the battery positive terminal and loose crimped joints.

Export desks reconcile manufacturer quality test because the bench record settles disputes.

Stock for manufacturer quality test is reserved against your last off-take so the reorder lands without a re-quote.

Distributors standardise on manufacturer quality test so the reorder lands on the same spec.

QC labs approve manufacturer certification with the drawing revision printed inside.

Quotes for manufacturer certification carry the batch code so receiving scans match the order.

Service engineers consolidate orders for manufacturer certification with the cross-reference already on file.

Applications for this wiring harness include automotive motorcycle — confirm the reference sha-3bb58edf79 against the unit you remove.

The PVC + Tinned Copper build is verified per production batch at China, Dongguan, with the batch code stamped on the housing. Batch ECCBC87E.

Support

Need help with China Manufacturer OEM Electric Wiring Harness for MotorcycleElectric Scooter IP67 Rated 12V PVC + Tinned Copper Cable Assembly? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (3 pin connector wire harness) so repeat orders are fast.

We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and 3 pin connector wire harness and we will process it on the same line you ordered from.

Garage groups book stock against manufacturer export carton and the batch code answers the query.

Fitment checks for manufacturer export carton run through part number sha-3bb58edf79 before the carton is sealed.

Import houses hold shelf space for manufacturer export carton because the spec sheet answers QC.

Where the original for automotive motorcycle is superseded, the desk maps the old reference to sha-3bb58edf79 before quoting.

Fleets running automotive motorcycle standardise on reference sha-3bb58edf79 to keep the spare list short. Batch ECCBC87E.

Time-zone cover is published so replies are predictable.

Support for wiring harness is handled by the desk that quoted the order, so context is never lost.

Harness build

The harness follows the original loom layout, so branches route and terminate as the vehicle expects.

• Confirm conductor gauge and strand count against the OE loom.
• Check connector keying and seal orientation before mating.
• Verify branch length and routed path for the target vehicle.
• Bench-test continuity on every circuit before fitment.

Every conductor is ring-tested for open and short before the loom is released.

Component stores forecast demand for manufacturer insulated grip because a confirmed fit beats a cheap guess.

Service agents reorder manufacturer insulated grip to hold the line-side kit complete.

Supply planners list manufacturer insulated grip so the claim closes without an argument.

Lead time for sha-3bb58edf79 is quoted against stock already on the shelf at China, Dongguan.

Sample units for automotive motorcycle ship with the batch documentation your quality team files. Batch ECCBC87E.

Sealing & routing

Seals are fitted in the original orientation; a reversed seal is the usual water-ingress fault.

Route the loom clear of heat and motion, clamped so vibration cannot fatigue the joints.

The drawing revision behind sha-3bb58edf79 is recorded on the test sheet packed with each carton.

Where automotive motorcycle appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch ECCBC87E.

Standing customers see demand notes before spot buyers.

Demand notes for wiring harness are shared with standing customers each quarter.

Verification

Conductor resistance is measured cold and held to the rated value before release.

Full connector seating with the lock engaged is what carries the harness through its service life.

Assembly lines track manufacturer durability rating with the cross-reference already on file.

Jobbers phase in manufacturer durability rating because the spec sheet answers QC.

Test benches flag manufacturer durability rating to keep audit season quiet.

Installers fitting this wiring harness on automotive motorcycle get torque and sequence notes from the vehicle manual, packed with the unit.

Reference sha-3bb58edf79 is released against the current drawing revision, so the shipped unit matches the quoted number. Batch ECCBC87E.

Field teardown photos inform the next revision of the sheet.

Application notes for wiring harness are written from bench records, not brochures.