AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car

Export cartons for ap552 automotive carry the gross weight and the batch code on two faces for the receiving scan.

Your reorder of ap552-136867 can be called off against a monthly schedule instead of one large upfront purchase.

Ratings on the carton label mirror the table above.

Any blank field can be checked on a unit within one day.

Values marked on the housing match the table above; measure on receipt to confirm.

Related references: Wiring-Harness category product detail warranty policy shipping policy our brand

• Every order of the ap552 wire harness is double checked against the vehicle list before dispatch.
• The turn signal switch is tested for continuity and insulation resistance, and the result is confirmed on the order.
• The ap552 wire harness is listed on the invoice with its part number ap552-136867 and the confirmed fit for the vehicle.
• The engineering reference for the turn signal switch lists the material, the dimension and the torque spec on the order.
• Part number ap552-136867 identifies the ap552 wire harness on the carton label, the invoice and the warranty record.
• Installation of the turn signal switch follows the drawing, and the seal is checked before the unit ships against the order.
• The ap552 wire harness is built to the same drawing as the original unit and confirmed before it leaves the bench.
• The turn signal switch specification is confirmed against the engineering standard and the order sheet.
• Orders for the ap552 wire harness are picked against the part number ap552-136867 and the vehicle application on file.

• The edgar ap552 manufacturer label carries the part number, the batch code and the packing date for traceability.
• Fitment checks for edgar ap552 manufacturer run through part number ap552-136867 before the carton is sealed.
• The desk lists edgar ap552 manufacturer against the vehicle application and quotes from China, Dongguan.

Lead time for ap552-136867 is quoted against stock already on the shelf at China, Dongguan.

Sample units for ap552 automotive ship with the batch documentation your quality team files.

Questions about wire harness fitment on ap552 automotive are answered by the engineer who approved the drawing, not a script.

The carton insert for ap552 automotive lists the torque values your fitter needs, in the sequence they need them.

Supplied brand: ViDiShi — not Edgar-branded; the original maker is referenced for fitment cross-checks only.

Each wire harness is inspected against the original equipment drawing before packing. Tight tolerances keep the unit stable through thermal cycling.

The electrical rating is validated across the temperature range. Dimensions are 1*0.5 mm².

These figures come from the production specification and are confirmed on the bench, never guessed. Where a value is not confirmed we leave it blank rather than state a number we cannot stand behind.

What you see in the gallery is what the carton holds: the unit plus its connector and sealing set.

Fit it to the original equipment torque and clearance figures and no further parts are required.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated condition, a pressure or flow confirmation where the spec calls for it, and a visual

check of the seal and connector.

The result is either a pass stamped on the carton or the unit is pulled.

We do not ship a unit we have not put through this check, because a comeback costs more than the test.

• The ap552 wire harness carries its part number ap552-136867 on the unit label alongside the batch code, packing date and order reference.
• A bench record for the turn signal relay logs the material batch, the dimension check and the test result on the order.
• A warranty claim on the ap552 wire harness starts with the part number ap552-136867 and the order reference.
• The turn signal relay is built to the engineering drawing with the material grade and dimension recorded on the order.
• The ap552 wire harness is supplied as a complete unit, and the fit is confirmed against the vehicle list.
• Torque values for the turn signal relay are listed on the installation sheet and confirmed at packing.

Applications for this wire harness include ap552 automotive — confirm the reference ap552-136867 against the unit you remove.

The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Dimensional checks sample every production lot, not just the first.

Fitment verification

Confirm the engine code plate and the part number ap552-136867 before purchase. This wire harness fits automotive. Reference model: Edgar Wire Harness.

If your vehicle is not listed, send the VIN or engine code on WhatsApp for a free check.

The fastest fitment check is visual: same stamping, same connector, same bolt pattern.

If any of the three disagrees, stop and send us a photo — forcing a wrong revision in damages more than the part itself.

Typical replacement scenarios

In every scenario the first step is identical — confirm ap552-136867 against the old stamping before the wrench moves.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit.

Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

• The vehicle type car range carries warranty cover on each unit, identified by part number ap552-136867.
• The quotation for the ap552 wire harness covers the wholesale price, the lead time, the export packing and the order reference.
• The catalogue entry for the vehicle type car lists part number ap552-136867 and the confirmed vehicle fit.
• Bulk supply of the ap552 wire harness is confirmed against the moq and the container load on the order.
• The vehicle type car covers the vehicle applications listed on the order confirmation for part number ap552-136867.
• The ap552 wire harness is held in stock for wholesale dispatch, with the lead time confirmed at order entry.
• Orders in the vehicle type car are confirmed against the vehicle list before the units are packed.
• Wholesale pricing for the ap552 wire harness is quoted per container, and the moq is listed on the quotation with the order reference.
• The vehicle type car sits in our catalogue next to part number ap552-136867 with the fit guide attached.

Where the original for ap552 automotive is superseded, our order desk cross-references the old reference to ap552-136867 before quoting.

Fleets running ap552 automotive standardise on reference ap552-136867 to keep the spare list short.

Model-year splits are flagged on the quotation when they matter.

The fitment answer always cites a part number, never a photo.

Cross reference

Every reference number below has been checked before it appears here. Cross numbers help you match the old part when the stamping has worn.

Every cross number on this page has been checked against the OE catalogue; anything unverified stays off.

If the number you hold is not listed, send it over and the desk confirms coverage in writing.

• Buyers comparing the automotive fuse types can match part number ap552-136867 against the vehicle application table.
• The ap552 wire harness is stocked for bulk orders, with lead time confirmed on the purchase order.
• The automotive fuse types is stocked in depth so orders ship against confirmed fits without delay.
• Distributor pricing for the ap552 wire harness covers carton packing, export documentation and the order reference.
• Each unit in the automotive fuse types carries its part number ap552-136867 on the label for order matching.
• A quotation for the ap552 wire harness lists the wholesale tier, the moq, the container load and the order reference.

Superseded numbers are mapped to the current reference.

Where two cross numbers exist, both are printed on the quote.

Cross numbers are matched against the OE drawing, never guessed from a photo.

What the bullet list cannot show is batch discipline on ap552-136867: every carton in a wholesale order carries the same verified specification, which is why the claim rate stays low.

• The ap552 wire harness range is quoted with the part number ap552-136867 and the confirmed vehicle application.
• The ap552 wire harness ships against a purchase order with the moq and lead time confirmed in writing.
• A fit guide for the ap552 wire harness is packed with every order that includes part number ap552-136867.

Carries reference ap552 136867 carries same warranty terms rest vidishi wholesale range.

Feature wording mirrors what the production line can verify.

Packaging graphics never promise more than the spec sheet.

Engineering notes

The AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights is designed around the original equipment geometry so the wire harness seats without modification.

Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench.

Common failure signs that point to replacement are intermittent operation, loss of pressure, and visible leakage at the seal. Replace on a clean bench and torque to the OE spec.

We do not over-state performance, and every rating follows the production specification.

A worn wire harness typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the wire harness when you see any of these: the function works only after a tap; the reading drifts with temperature; or the surrounding housing shows heat discolouration from a poor seat.

Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave the field blank instead of publishing a number nobody can stand behind.

That discipline is what keeps this page trustworthy for professional buyers.

Store the new wire harness in its sealed bag until fitment; dust and shop moisture on the seat or contacts are the avoidable causes of early failure.

Handle by the body, not the working surfaces, and never reuse the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

The compatibility table is not a diagnostic tool for your vehicle or for part ap552-136867.

Every unit in the ap552 wire harness is confirmed against the vehicle application before it ships.

Every unit is function-tested before packing and dispatched under the ViDiShi brand. Stock is held for fast wholesale dispatch from China, Dongguan. Units are assembled, inspected, and packed at Guangdong, China before dispatch.

Listed and cross-checked for the application: automotive. Packed to a 1*0.5 mm² envelope for safe international shipping. Model/part reference on the carton: EdgarWireHarness.

• The ap552 wire harness family ships with warranty cover and the part number ap552-136867 on the unit label.
• Bulk orders for the ap552 wire harness are packed to carton with the export documents and the order reference.
• Orders for the ap552 wire harness are allocated by part number ap552-136867 and confirmed against the vehicle list.
• The wholesale price for the ap552 wire harness is confirmed per container before the order is released.
• The ap552 wire harness line is built to the same drawings across the range, and the fit is confirmed per order.
• Stock of the ap552 wire harness is held for wholesale orders, and the moq is listed on the quotation.

Connector condition is the first thing to check on removal.

1. Disconnect power and relieve system pressure.
2. Remove the old wire harness after noting the part number ap552-136867.
3. Clean the seat and check for debris or worn seals.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Fitting sits at a moderate difficulty level — a competent DIYer with the right tools can manage, but when in doubt hand it to a qualified technician and hold on to the old unit until

the new one proves itself.

Set up before you start: torque wrench, clean bench, and the old unit beside the new one. Most comebacks trace back to a dirty seat or a guessed torque value.

If the old part shows heat damage or contamination, find that root cause first — a new wire harness in the same conditions fails the same way.

• Stock in the ap552 wire harness is checked against part number ap552-136867 before the order is packed.
• An export order for the ap552 wire harness is confirmed with the lead time and the container load.
• The ap552 wire harness covers the same vehicle applications as part number ap552-136867 with the fit confirmed.

The removal sequence is the reverse of the fitment sequence.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

• The ap552 wire harness is checked against the vehicle list and the reference drawing before packing.
• An order for the auto vehicle shipping is confirmed with the shipping lead time and the container load.
• Buyers ordering the ap552 wire harness receive the reference number and part number ap552-136867 on the invoice.

We supply AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights in wholesale and B2B quantities, backed by one locked specification across the batch.

Batch-to-batch consistency is the whole point: same spec, same carton marking, same document set for customs. Tell us your offtake cycle and we hold stock against it.

• The ap552 automotive aftermarket warranty crosses over to the reference number and fits the same vehicle application.
• The ap552 wire harness ships in export cartons, and the lead time is confirmed at order entry.
• A compatible ap552 automotive aftermarket warranty is quoted against the interchange number for the same vehicle list.
• Freight for the ap552 wire harness is quoted per container or per pallet depending on the order size.
• The ap552 automotive aftermarket warranty is matched to the reference part number ap552-136867 for the same application.
• Each ap552 auto wire harnesston is sealed with the packing list, the dispatch date and the order reference.
• Order the ap552 automotive aftermarket warranty against part number ap552-136867 and the fit is confirmed before dispatch.
• The ap552 wire harness is packed to carton for export, with the order reference on the label.
• The ap552 automotive aftermarket warranty replaces the reference unit on the same vehicle with the fit confirmed by part number.

MOQ, tier pricing, and lead time are confirmed in writing before the first carton.

Mixed-SKU pallets are accepted for established importers.

Payment terms for accounts are confirmed before the first dispatch.

Orders ship from China, Dongguan. Packaged shipping weight is stated per the carton. We use sea, air, and express options. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

• A cross reference for the ap552 wire harness is packed with the order so receiving can match part number ap552-136867.
• Shipping for the ap552 wire harness is confirmed with the lead time and the container load on the order.
• The ap552 wire harness is listed against the interchange number and the confirmed vehicle application.
• The ap552 wire harness leaves the bench in cartons marked with the packing list, the batch code and the order reference.
• Buyers use the ap552 wire harness as a direct replacement, and the order sheet confirms the vehicle fit.
• An export shipment of the ap552 wire harness is confirmed with the freight quote and the lead time.
• The ap552 wire harness matches the reference drawing, and part number ap552-136867 identifies it on the carton.
• The ap552 wire harness is loaded to container with the packing list and the order reference for transit.
• An order for the ap552 wire harness is confirmed against the vehicle list and the reference number.

Dangerous-goods rules are checked before any air booking.

Consolidated shipments share one bill of lading per buyer.

Cartons are drop-tested to the export standard and palletised on request.

Tracking is shared the day the carton leaves the dock.

This wire harness is supplied under the ViDiShi brand, a matching replacement referencing Edgar. We are independent of the original brand owner.

Naming the original maker is a fitment aid, nothing more — there is no affiliation behind it, and the specification responsibility sits with ViDiShi alone.

• The ap552 automotive aftermarket parts is supplied against the interchange reference with warranty cover on the unit.
• Dispatch of the lead generation is confirmed against the order, and the carton count is recorded.
• Part number ap552-136867 in the ap552 automotive aftermarket parts range is matched to the vehicle application on the order.
• The lead generation ships with the packing date and the batch code on the carton label for the order.
• The ap552 automotive aftermarket parts is quoted with the reference number and the confirmed fit for the vehicle.
• Freight for the lead generation is confirmed per container, and the transit time is quoted at order entry.
• Receiving matches the ap552 automotive aftermarket parts to the purchase order using part number ap552-136867 on the label.
• The lead generation is packed in export cartons with the order reference and the packing list.
• The ap552 automotive aftermarket parts covers the same applications as the reference unit, confirmed before the order ships.
• A shipment of the lead generation is confirmed with the lead time and the carton count on the order.
• A warranty claim on the ap552 automotive aftermarket parts starts with part number ap552-136867 and the vehicle application.
• The lead generation is dispatched in cartons sealed with the packing list, the dispatch date and the order reference.

The order sheet for the ap552 automotive aftermarket parts lists the reference number and part number ap552-136867.

The reference maker is named only where fitment requires it.

Trade dress is kept neutral for markets with brand restrictions.

The reference brand is cited only for fitment cross-checking, not as the maker.

• The ap552 wire harness is stocked against the reference number so orders ship with the fit confirmed.
• Shipping stock of the ap552 wire harness is confirmed against the order before the container is loaded.
• The order sheet for the ap552 wire harness lists the reference number and part number ap552-136867.

Data you can audit

Our audit rule: measured values from the production spec are published as-is; fields the line has not verified are left empty instead of being guessed.

To be clear on the label: matching replacement — no endorsement from the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Export & customs

For cross-border orders we supply the commercial invoice, packing list, and HS code your customs broker needs to clear the line; import duties and local compliance sit with the buyer of record.

A few destinations carry extra compliance steps; confirm any import restriction for your market before ordering so the shipment is not held at the border.

Your enquiry data is handled under our privacy commitment: used only to process the order and never sold. The unit is built to the published specification; verify regulatory fit for your application before installation.

• The auto vehicle identification number is confirmed for the vehicle applications in the order before the unit ships.
• The ap552 wire harness carries the batch code and the inspection date on the quality label for the order.
• A warranty claim on the auto vehicle identification number starts with the vehicle application and part number ap552-136867.
• The warranty on the ap552 wire harness is confirmed against the order reference and the batch code.
• The fit guide for the auto vehicle identification number is confirmed against part number ap552-136867 before the order ships.
• Quality control on the ap552 wire harness is documented with the batch code and the inspection standard on the order.
• The auto vehicle identification number guide lists the vehicle applications and the fit confirmed by part number ap552-136867.
• The ap552 wire harness is covered by the warranty terms, and the quality file is kept for inspection.
• Fit for the auto vehicle identification number is confirmed against the vehicle list before the order is released.
• A batch certificate for the ap552 wire harness references the inspection standard, the test record and the order reference.
• The auto vehicle identification number matches the vehicle application recorded on the order, checked by part number ap552-136867.
• The ap552 wire harness carries a quality label with the batch code for traceability, audit and order matching.

Published numbers are the same ones printed on the carton label.

Compatibility statements are limited to fitment confirmed by part number.

Need help with AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030.

We answer in English and Chinese during business hours, and we keep a record of your part number (ap552-136867) so repeat orders are fast.

This wire harness is listed to buyers under the marketplace term “AP552”; mention it on WhatsApp and we pull the exact specification without a second round of questions.

Documentation travels on request: the spec sheet and fitment note go straight into your parts system, and any warranty question is answered with just the order number and the reference ap552-136867.

• A fitment note for the ap552 wire harness is packed with the carton and the part number ap552-136867.
• The warranty on the ap552 wire harness starts from the dispatch date recorded on the packing list.
• The ap552 wire harness is quoted only after the vehicle application is confirmed against part number ap552-136867.
• An inspection record for the ap552 wire harness is filed with the batch code and the order reference.
• Orders for the ap552 wire harness are released once the fit is confirmed against the vehicle list.
• The ap552 wire harness is released only after the quality check and the warranty terms are confirmed on the order.

Inside ap552-136867, the loom and the sealed connector do all the work: one moves the signal or current, the other protects the contact from the environment.

The sheath holds the bundle aligned through thermal cycling, and no AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights leaves the line without a continuity check.

• Confirm the conductor gauge and the terminal type on AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights.
• Match the connector keying and pin count to the old wire harness loom.
• Inspect the seal seats and the strain relief on AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights.
• Verify the routing clamps clear moving parts and heat sources.

Order ap552-136867 for the AP552 application rather than by vehicle name — one harness family spans several pin layouts, and the reference on the AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf

Car Vehicle Turn Signal Lights carton is what confirms the match.

• The auto vehicle auctions covers the vehicle applications in the fit guide, confirmed by part number ap552-136867.
• A quality audit on the ap552 wire harness covers the batch code, the test record and the inspection standard on the order.
• Buyers confirm the auto vehicle auctions against the vehicle list before the order is picked.

Batch records for this unit type are retained for traceability audits.

Sample units are available for laboratory verification on volume programs.

On AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights, confirm the pin-out against the diagram and ring each circuit for continuity before fitment.

A loose terminal is the most common cause of a return, so torque or crimp to spec and label the leads against the sheet shipped with ap552-136867.

The AP552 fitment of AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights is checked by reference number rather than model year — one platform runs two harness

variants across its build dates.

Match the connector and seal of the old loom before you place the order for ap552-136867.

• The ap552 automotive wire harness is matched to the vehicle application on the order sheet and part number ap552-136867.
• The ap552 wire harness ships with the warranty card and the batch code printed on the unit label.
• A fit check on the ap552 automotive wire harness runs against the vehicle list before the carton is sealed.

Fitment of AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights is half mechanical and half electrical — seat the connectors with the latches home, dress the loom

clear of chafe points, and log ap552-136867 so the next swap follows the same route.

An intermittent contact on AP552 DOT LED Flasher Fuse Input Lead Wiring Harness for Golf Car Vehicle Turn Signal Lights is an early warning, not a catastrophe: it shows up before a dead circuit.

Write ap552-136867 into the service record so the next swap follows suit, keeping the cover on ap552-136867 clean.

• The ap552 car new vehicle ships with the fit guide and part number ap552-136867 for order confirmation.
• The batch code on the ap552 wire harness traces the unit to its inspection record and the order.
• The vehicle application for the ap552 car new vehicle is confirmed on the order before dispatch.