Shanghai Cixi 0-100L-min Food Grade Micro Flow Meter

Where the original for the applications in the fitment table is superseded, our order desk cross-references the old reference to 100l-27492f before quoting.

Fleets running the applications in the fitment table standardise on reference 100l-27492f to keep the spare list short.

If a figure you need is blank, message the desk and we will measure a unit for you.

Tolerances follow the original equipment drawing for a drop-in fit.

Related references: Gauge-Meter category product detail warranty policy shipping policy our brand

• The flow meter is supplied as a complete unit, and the fit is confirmed against the vehicle list.
• Torque values for the flow meter are listed on the installation sheet and confirmed at packing.
• Receiving teams match the flow meter to the purchase order using part number 100l-27492f on the carton.
• The flow meter passes an inspection for dimension, material and seal quality before the order is dispatched.
• The flow meter is stocked for same day dispatch once the order is confirmed against the vehicle list.
• The design reference for the flow meter is confirmed against the engineering standard and the drawing.
• Each flow meter unit is checked against part number 100l-27492f before the order is packed for shipping.
• A test record for the flow meter covers continuity, insulation and the installation torque spec on the order.
• The order sheet for the flow meter lists the part number 100l-27492f and the confirmed vehicle application.

• Fitment checks for wholesaleautopartsdirect shanghai manufacturer run through part number 100l-27492f before the carton is sealed.
• The desk lists wholesaleautopartsdirect shanghai manufacturer against the vehicle application and quotes from China, Dongguan.
• Each wholesaleautopartsdirect shanghai manufacturer order ships with the batch code and the spec sheet packed on top of the carton.

Questions about flow fitment on the applications in the fitment table are answered by the engineer who approved the drawing, not a script.

The carton insert for the applications in the fitment table lists the torque values your fitter needs, in the sequence they need them.

Lead time for 100l-27492f is quoted against stock already on the shelf at China, Dongguan.

Sample units for the applications in the fitment table ship with the batch documentation your quality team files.

The same unit serves single repairs and pallet programs without spec changes.

Supplied brand: ViDiShi.

Each flow is inspected against the original equipment drawing before packing. The metal, alloy, aluminum alloy, stainless steel body resists wear under continuous duty and holds tolerance through thermal cycling.

The electrical rating is validated across the temperature range. Dimensions are per the OE drawing. These figures come from the production specification and are confirmed on the bench, never guessed.

Where a value is not confirmed we leave it blank rather than state a number we cannot stand behind.

Packing includes the mating connector and the sealing items pictured in the gallery; nothing extra needs to be sourced before the install. Torque values and clearances follow the original equipment spec.

The Type of flow matters because it is part of the specification we confirm before dispatch.

The Material of Metal, Alloy, Aluminum alloy, Stainless steel matters because it decides wear life and resistance to the medium.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated condition, a pressure or flow confirmation where the spec calls for it, and a visual

check of the seal and connector.

The result is either a pass stamped on the carton or the unit is pulled.

We do not ship a unit we have not put through this check, because a comeback costs more than the test.

• The sweetener sugar replacement is quoted per unit with the part number 100l-27492f and the fit confirmed before dispatch.
• The flow sensor material and dimension are confirmed against the specification before the order ships.
• The sweetener sugar replacement on this page is part number 100l-27492f, built to the original equipment drawing and confirmed against the order sheet.
• The installation guide for the flow sensor lists the torque spec and the material grade on the order.
• Each sweetener sugar replacement leaves the line as a single unit with part number 100l-27492f printed on the label for order matching.
• Quality control on the flow sensor checks the dimension, the material and the engineering reference on the order.

Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference 100l-27492f carries the same warranty terms as the rest of the ViDiShi wholesale range.

Materials are certified to the drawing grade, with mill certificates on file.

First-article inspection is available for volume programs on request.

Batch test records are archived and available on request.

Dimensional checks sample every production lot, not just the first.

Fitment verification

Confirm the engine code plate and the part number 100l-27492f before purchase. This flow fits the applications in our fitment list. Reference model: M series.

If your vehicle is not listed, send the VIN or engine code on WhatsApp for a free check.

Lay the new unit next to the old one before fitting — the casting marks, the connector keyway, and the mounting holes have to line up.

A near-miss revision will fight the seat and can take the surrounding circuit with it.

Typical replacement scenarios

In every scenario the first step is identical — confirm 100l-27492f against the old stamping before the wrench moves.

We would rather say “unverified” than guess. If your application is not listed, send the engine code or the old stamping and we confirm fitment first — the answer arrives before the order does.

• The flow meter is stocked in depth so orders ship against confirmed fits without delay.
• The flow meter ships against a purchase order with the moq and lead time confirmed in writing.
• Each unit in the flow meter carries its part number 100l-27492f on the label for order matching.
• Bulk orders for the flow meter are packed to carton with the export documents and the order reference.
• The flow meter range is quoted with the part number 100l-27492f and the confirmed vehicle application.
• The wholesale price for the flow meter is confirmed per container before the order is released.
• A fit guide for the flow meter is packed with every order that includes part number 100l-27492f.
• Stock of the flow meter is held for wholesale orders, and the moq is listed on the quotation.
• The flow meter family ships with warranty cover and the part number 100l-27492f on the unit label.

Export cartons for the applications in the fitment table carry the gross weight and the batch code on two faces for the receiving scan.

Your reorder of 100l-27492f can be called off against a monthly schedule instead of one large upfront purchase.

Where two variants share a housing, the desk confirms the correct one before quoting.

Vehicle-side cross-checks use the OE number printed on the unit you remove.

Send the vehicle VIN and the desk confirms fitment in writing.

Model-year splits are flagged on the quotation when they matter.

Cross reference

Every reference number below has been checked before it appears here. Cross numbers help you match the old part when the stamping has worn.

We publish only the numbers we have confirmed. Cross numbers we have not checked are left off the page.

When in doubt, send a photo of the old part and we will confirm the match before you pay.

• Orders for the flow meter are allocated by part number 100l-27492f and confirmed against the vehicle list.
• An export order for the flow meter is confirmed with the lead time and the container load.
• The flow meter line is built to the same drawings across the range, and the fit is confirmed per order.
• The flow meter is quoted for bulk supply with the moq, the carton count, the lead time and the order reference.
• Stock in the flow meter is checked against part number 100l-27492f before the order is packed.
• Purchase orders for the flow meter are confirmed against the wholesale tier and the moq.

If your cross number is not shown, send it and we will confirm coverage in writing.

Beyond the spec list, 100l-27492f is chosen for repeatable quality across a wholesale batch. Every 100l-27492f carton carries the same verified specification, which keeps warranty claims low.

• The flow meter covers the same vehicle applications as part number 100l-27492f with the fit confirmed.
• The flow meter is packed for export in cartons marked with the order reference and the batch code.
• A replacement order anywhere in the flow meter is matched to the vehicle list before dispatch.

Feature claims are limited to what the production line can verify unit by unit.

Engineering notes

A quotation for the flow meter lists the wholesale tier, the moq, the container load and the order reference.

The metal, alloy, aluminum alloy, stainless steel element keeps tolerance under thermal cycling and vibration. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench.

Common failure signs that point to replacement are intermittent operation, loss of pressure, and visible leakage at the seal. Replace on a clean bench and torque to the OE spec.

We do not over-state performance, and every rating follows the production specification.

A worn flow typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Typical signs the flow is finished: intermittent function that clears after a tap, a reading that wanders as the temperature changes, or heat marks around the seat pointing to a poor connection.

Swap it at the first sign and the downstream parts stay protected; a five-minute check after fitting keeps the comeback away.

No figure on this page is decorative: if the production line has not verified a value, the field stays blank — professional buyers can audit every number we publish.

Store the new flow in its sealed bag until fitment; dust and shop moisture on the seat or contacts are the avoidable causes of early failure.

Handle by the body, not the working surfaces, and never reuse the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Specifications shared here are not a confirmed diagnosis of any fault on part 100l-27492f.

Verified details from supplier and reference listings: 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) is supplied as a made-to-drawing flow for wholesale and OEM resale.

Every unit is function-tested before packing and dispatched under the ViDiShi brand. Stock is held for fast wholesale dispatch from China, Dongguan.

The flow is built from SS316, selected for service life in the listed applications. Units are assembled, inspected, and packed at Shanghai, China before dispatch.

Rated to an accuracy class of +/-1%, +/-0.5%, +/-1.5%.

Model/part reference on the carton: M series.

• The flow meter is listed with part number 100l-27492f on the invoice for order traceability.
• A distributor order for the flow meter is confirmed with the wholesale price and the lead time.
• Buyers ordering from the flow meter receive the part number 100l-27492f and the fit confirmation together.
• The moq for the flow meter is listed on the quotation, and the lead time is confirmed per order.
• The flow meter is packed with the order reference and part number 100l-27492f for receiving.
• Wholesale stock of the flow meter is allocated by order, with the carton count confirmed at packing.

Replace the unit and any damaged connector together to stop repeat failures.

Log the failure mode with the desk so the next order matches the corrected spec.

Root-cause notes ship with the unit when a known failure mode exists.

Connector condition is the first thing to check on removal.

1. Disconnect power and relieve system pressure.
2. Remove the old flow after noting the part number 100l-27492f.
3. Clean the seat and check for debris or worn seals.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Installation difficulty is moderate. If unsure, use a qualified technician. Keep the old part until you confirm the new unit behaves correctly.

Set up before you start: torque wrench, clean bench, and the old unit beside the new one. Most comebacks trace back to a dirty seat or a guessed torque value.

If the old part shows heat damage or contamination, find that root cause first — a new flow in the same conditions fails the same way.

• Every unit in the flow meter is confirmed against the vehicle application before it ships.
• The flow meter is supplied in bulk with export documentation and the order reference on the carton.
• The flow meter range carries warranty cover on each unit, identified by part number 100l-27492f.

Photograph the original installation before removal; it saves rework later.

Keep the old unit until the new one passes its first function check.

Step photos from the bench are available for first-time fitters.

The same warranty runs across every carton in a wholesale order, with batch certificates issued on request so your receiving team can file them straight away.

• A cross reference for the light corn syrup substitute is packed with the order so receiving can match part number 100l-27492f.
• The flow meter leaves the bench in cartons marked with the packing list, the batch code and the order reference.
• The light corn syrup substitute is listed against the interchange number and the confirmed vehicle application.

Carries reference 100l 27492f carries same warranty terms rest vidishi wholesale range.

The warranty covers manufacturing defects; labour is not included.

Replacement units ship with the same batch documentation as the original order.

We supply 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) in wholesale and B2B quantities, backed by one locked specification across the batch.

Batch-to-batch consistency is the whole point: same spec, same carton marking, same document set for customs. Tell us your offtake cycle and we hold stock against it.

• Buyers use the flow part reference 100l-27492f as a direct replacement, and the order sheet confirms the vehicle fit.
• An export shipment of the flow meter is confirmed with the freight quote and the lead time.
• The flow part reference 100l-27492f matches the reference drawing, and part number 100l-27492f identifies it on the carton.
• The flow meter is loaded to container with the packing list and the order reference for transit.
• An order for the flow part reference 100l-27492f is confirmed against the vehicle list and the reference number.
• Dispatch of the flow meter is confirmed against the order, and the carton count is recorded.
• The flow part reference 100l-27492f is supplied against the interchange reference with warranty cover on the unit.
• The flow meter ships with the packing date and the batch code on the carton label for the order.
• Part number 100l-27492f in the flow part reference 100l-27492f range is matched to the vehicle application on the order.

Mixed-SKU pallets are accepted for established importers.

Dispatch leaves our China, Dongguan facility with the carton weight already calculated. Choose sea, air, or express — the tracking number reaches you the day the parcel moves.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

• The duty aftermarket replacement flow is quoted with the reference number and the confirmed fit for the vehicle.
• Freight for the airtight brown sugar container is confirmed per container, and the transit time is quoted at order entry.
• Receiving matches the duty aftermarket replacement flow to the purchase order using part number 100l-27492f on the label.
• The airtight brown sugar container is packed in export cartons with the order reference and the packing list.
• The duty aftermarket replacement flow covers the same applications as the reference unit, confirmed before the order ships.
• A shipment of the airtight brown sugar container is confirmed with the lead time and the carton count on the order.
• A warranty claim on the duty aftermarket replacement flow starts with part number 100l-27492f and the vehicle application.
• The airtight brown sugar container is dispatched in cartons sealed with the packing list, the dispatch date and the order reference.
• The duty aftermarket replacement flow is stocked against the reference number so orders ship with the fit confirmed.

Tracking is shared the day the carton leaves the dock.

Air and sea options are quoted with volumetric weight already calculated.

We are independent of the original brand owner.

Naming the original maker is a fitment aid, nothing more — there is no affiliation behind it, and the specification responsibility sits with ViDiShi alone.

• The order sheet for the flow part reference 100l-27492f wholesale lists the reference number and part number 100l-27492f.
• Shipping stock of the flow meter is confirmed against the order before the container is loaded.
• The flow part reference 100l-27492f wholesale is checked against the vehicle list and the reference drawing before packing.
• The flow meter travels in export cartons marked with the batch code and the order reference.
• Buyers ordering the flow part reference 100l-27492f wholesale receive the reference number and part number 100l-27492f on the invoice.
• The lead time for the flow meter is confirmed at order entry and the freight is quoted per container.
• The flow part reference 100l-27492f wholesale crosses over to the reference number and fits the same vehicle application.
• Each shipment of the flow meter carries the packing list, the batch code and the order reference.
• A compatible flow part reference 100l-27492f wholesale is quoted against the interchange number for the same vehicle list.
• The flow meter is packed for transit with the carton count, the dispatch date and the order reference recorded.
• The flow part reference 100l-27492f wholesale is matched to the reference part number 100l-27492f for the same application.
• An order for the flow meter is confirmed with the shipping lead time and the container load.

Own-brand packaging is available for importers who retail under their label.

Shipping for the flow meter is confirmed with the lead time and the container load on the order.

Own-brand artwork is applied at the packing stage, not afterwards.

• Order the part reference 100l-27492f wholesale against part number 100l-27492f and the fit is confirmed before dispatch.
• The flow meter ships in export cartons, and the lead time is confirmed at order entry.
• A cross reference for the part reference 100l-27492f wholesale is packed with the order so receiving can match part number 100l-27492f.

Data you can audit

Our audit rule: measured values from the production spec are published as-is; fields the line has not verified are left empty instead of being guessed.

To be clear on the label: matching replacement — no endorsement from the original brand owner.

Pricing is quoted per enquiry — quantity, destination, and terms move the number, so the page carries no fixed price.

Export & customs

For cross-border orders we supply the commercial invoice, packing list, and HS code your customs broker needs to clear the line; import duties and local compliance sit with the buyer of record.

A few destinations carry extra compliance steps; confirm any import restriction for your market before ordering so the shipment is not held at the border.

Your enquiry data is handled under our privacy commitment: used only to process the order and never sold. The unit is built to the published specification; verify regulatory fit for your application before installation.

• The flow meter is quoted only after the vehicle application is confirmed against part number 100l-27492f.
• An inspection record for the flow meter is filed with the batch code and the order reference.
• Orders for the flow meter are released once the fit is confirmed against the vehicle list.
• The flow meter is released only after the quality check and the warranty terms are confirmed on the order.
• The flow meter covers the vehicle applications in the fit guide, confirmed by part number 100l-27492f.
• A quality audit on the flow meter covers the batch code, the test record and the inspection standard on the order.
• Buyers confirm the flow meter against the vehicle list before the order is picked.
• The flow meter ships with the warranty card and the batch code printed on the unit label.
• The flow meter is matched to the vehicle application on the order sheet and part number 100l-27492f.
• The batch code on the flow meter traces the unit to its inspection record and the order.
• A fit check on the flow meter runs against the vehicle list before the carton is sealed.
• A warranty claim on the flow meter is filed against the batch code and the dispatch date.

Compatibility statements are limited to fitment confirmed by part number.

Regulatory wording follows the destination market on request.

Nothing on the page overstates what the bench has verified.

Need help with 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi)? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030.

We answer in English and Chinese during business hours, and we keep a record of your part number (100l-27492f) so repeat orders are fast.

Ask for the specification sheet and the fitment note and your receiving team can file the flow without reading a single page.

Warranty claims run on the order number plus 100l-27492f through the same chat you bought from.

• The list of fast food chains ships with the fit guide and part number 100l-27492f for order confirmation.
• The flow meter passes inspection against the quality standard before the warranty is registered on the order.
• The vehicle application for the list of fast food chains is confirmed on the order before dispatch.
• The quality file for the flow meter lists the batch code, the test record and the inspection date on the order.
• Part number 100l-27492f confirms the list of fast food chains fit against the vehicle application on file.
• The flow meter is certified against the inspection standard, and the batch code is on the label for the order.

A fitment note for the list of fast food chains is packed with the carton and the part number 100l-27492f.

Inside 100l-27492f, the element and the dial do all the work: one senses, the other shows.

The metal, alloy, aluminum alloy, stainless steel construction keeps the movement true under vibration, and no 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) leaves

the line without a calibration check.

• Confirm the dial size and the connection type on 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi).
• Match the mounting pattern to the old flow gauge.
• Inspect the window and the pointer for true runout on 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi).
• Verify the process connection seals before fitting 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi).

Order 100l-27492f for the 100l-27492f application rather than by instrument name — one gauge family spans several connection types,

and the reference on the Shanghai Cixi 0.5-100 L/min sugar syrup and molasses Food Grade

Micro flow meter Flowmeter carton is what confirms the match.

• The application reference 100l-27492f is listed with the vehicle applications and the confirmed fit by part number.
• An audit of the 100l replacement label checks the batch code, the warranty terms and the test record on the order.
• An order for the application reference 100l-27492f holds until the vehicle application is confirmed against the fit guide.

Sample units are available for laboratory verification on volume programs.

Calibration on 100l-27492f is what makes 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) a measuring instrument rather than a decoration.

We zero and span each unit against a reference and record the check so the next swap matches.

Before ordering 100l-27492f, check the span of the old gauge — Shanghai Cixi 0.5-100 L/min

sugar syrup and molasses Food Grade Micro flow meter Flowmeter is confirmed by reference number against 100l-27492f, and one body covers multiple ranges across its build.

• The fits 100l order fit is verified against the vehicle list and recorded with part number 100l-27492f.
• The warranty terms for the 100l specification label are confirmed on the order and printed on the packing list.
• Receiving checks the fits 100l order against the vehicle application and part number 100l-27492f on the label.

Mount 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) with the correct thread or flange and torque it to spec; a leaking process connection is the

fastest way to lose the reading.

Keep the electrical route clear of the power runs on 100l-27492f.

A drifting reading on 0.5-100 L/min food-grade micro flow meter (Shanghai Cixi) is an early warning, not a catastrophe: it shows up before a hard failure.

Write 100l-27492f into the service record so the next swap follows suit, keeping the cover on 100l-27492f clean.

• The 100l-27492f application body material is confirmed for the vehicle applications in the order before the unit ships.
• The 100l replacement label carries is inspected against the quality standard and released with the batch code and the order reference.
• A warranty claim on the 100l-27492f application body material starts with the vehicle application and part number 100l-27492f.

Bench notes for this application are written by the test crew.

Matching parts are quoted together so wear items ship as a set.

Where the vehicle needs a matching part, the desk lists it with the quote.