Overhaul Kit 2760331501 Replacement for M278 4.6/4.7 V8 biturbo

Overhaul Kit – compatible replacement for Mercedes-Benz, supplied under Vidishi Auto. Wholesale and B2B pricing on request.

$45.00

SKU: mercedes-m278-piston-rings Category: Tags: , , ,

100% Secure Checkout

Free Shipping Over $1099

Customer Satisfaction

International Shipping

Product Details

At a glance

10 piecesMOQ
Pistonscategory
Vidishi Autosupplied brand
M278 4.6/4.7 V8 biturbomodel

Wholesale pricing for the Engine Overhaul Pistons Gaskets Set is set per order volume and destination — ask the parts team for a volume quote.


Product overview

The Engine Overhaul Pistons Gaskets Set is an aftermarket replacement part supplied under the Vidishi Auto brand and forms part of our Pistons range. It is a compatible replacement built to the same fitment as the original-equipment application, and it is not a genuine original part.

Each overhaul kit is packed for international wholesale distribution from Dongguan, China and is supplied to distributors, repair shops and e-commerce sellers. Wholesale terms, freight handling and warranty administration are confirmed per order and per destination.

Every order is checked before dispatch for kit contents compared against the packing list before teardown begins and liner protrusion measured after fitting so the head clamps the liner correctly.

Request a wholesale quote


Specifications

Part type Overhaul Kit
Supplied brand Vidishi Auto
Reference brand Mercedes-Benz
MOQ 10 pieces
Condition New, aftermarket
Brand claim None – independent aftermarket part
Place of origin Dongguan, China
Compatible vehicle Mercedes-Benz
Model M278 4.6/4.7 V8 biturbo


Fitment check

This kit is intended for Mercedes-Benz applications (listed model: M278 4.6/4.7 V8 biturbo). Confirm the application before order. Our team verifies fitment against your vehicle or equipment details — send the model, year and engine code for a precise match.

Fitment verification before dispatch — three checks: (1) send the engine code plate or the number stamped on your old piston or the block; (2) a photo of the removed piston, rings and cylinder liner; (3) the VIN or chassis plate number. Our team confirms fitment against these before your order ships.

Engine codes listed: M278 4.6/4.7 V8 biturbo. Send your engine code and our team confirms the match before you buy.

Checks before dispatch

Kit contents compared against the packing list before teardown begins
Liner protrusion measured after fitting so the head clamps the liner correctly
Bearing clearances checked with Plastigauge at final assembly
Gasket surfaces and sealing beads inspected for transit damage

Check fitment via WhatsApp Installation guide

Is this part easy to fit? Difficulty depends on the application and the tools on hand: some applications are a direct bolt-on, others need the assembly removed first. Send us your vehicle or equipment details and we will confirm before you buy.

Fitment risk: model-year and trim variations may apply. Always confirm with our parts team before purchase.


Reference & cross numbers

The Engine Overhaul Pistons Gaskets Set is listed below with the cross numbers we hold on file.

Reference brand Mercedes-Benz
Compatible vehicle Mercedes-Benz
Part type Overhaul Kit

Verify your part number before ordering

  1. Locate the stamped or printed marking on your original unit — the reference for this product is 2760331501.
  2. Compare the casting or label marking character by character against 2760331501 before you order.
  3. Send us a photo of the marking on WhatsApp and quote 2760331501 so our team can double-check it for you.
  4. Your quotation, proforma invoice and order confirmation each carry reference 2760331501.
  5. Packing slips and export documents list 2760331501 so every carton stays traceable end to end.
  6. If the marking on your part differs from 2760331501, send it anyway — we cross-check it against our catalogue first.
  7. Reorder or spare-part requests should quote 2760331501 to guarantee an identical specification.
  8. Warranty and after-sales cases are logged under reference 2760331501, so coverage is verifiable without the original invoice.

Listed references are for identification and compatibility lookup only. This is an independent aftermarket component supplied under the Vidishi Auto brand, not a genuine Mercedes-Benz-branded product.


Key features

Compatible replacement for Mercedes-Benz

Compatible replacement under the Vidishi Auto brand, built to the same fitment as the original-equipment application.

MOQ

10 pieces.

International wholesale packing

Every order is packed for international wholesale distribution in Dongguan, China.

Fitment verified before dispatch

Fitment is verified against your vehicle or equipment details before dispatch.

Export documentation

Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.


When this kit is needed

A worn or failed Engine Overhaul Pistons Gaskets Set can lead to drivability, safety or maintenance issues. Typical symptoms reported by workshops include:

High-hour engine with low compression, blow-by and heavy oil consumption
Knock or rumble that teardown traces to worn pistons, liners and bearings
Coolant in oil or oil in coolant after head or liner seal failure
Power loss and hard starting that service items no longer fix

Diagnose the root cause with our diagnostic guide before ordering, and confirm the exact application with our team.


Installation

Replace pistons, liners, bearings and full gasket set as a matched overhaul
Measure and record every clearance rather than trusting box labels alone
Prime oil galleries and follow the published torque and angle stages
Run the staged break-in schedule and re-torque where the manual requires
Confirm fitment against your vehicle or equipment details
Torque fasteners to the maker’s specification
Test and re-check before returning the vehicle to service

Difficulty varies by application. When in doubt, use a qualified workshop. The full installation guide lists the torque figures and the tools needed for this job.


Warranty

Vidishi Auto backs this aftermarket overhaul kit with a limited warranty against manufacturing defects. Warranty terms follow the product’s packing card and your regional agreement. Cover applies to orders from 10 pieces upward.

What is covered: manufacturing defects in the component as supplied. Wear items, damage from incorrect fitting and damage in service are outside cover, as set out in the regional agreement.

Brand position: this is an independent aftermarket part supplied under the Vidishi Auto brand. It is not a genuine Mercedes-Benz product and carries no Mercedes-Benz approval.

How cover is applied — handling follows the practice used for engine overhaul rebuild kit: kit contents compared against the packing list before teardown begins. Claims are assessed against that practice and the packing card, not against a generic list.

Making a claim: contact our parts team with the order reference and the part’s packing details; we confirm the next step and the replacement route.

Warranty policy Returns


Wholesale & B2B

We supply Engine Overhaul Pistons Gaskets Set to distributors, importers, repair shops and e-commerce sellers with flexible MOQ, volume pricing and export support from Dongguan, China.

MOQ

10 pieces — scalable to container loads.

Volume pricing

Volume tiers for the overhaul kit are quoted per order size and destination.

Export support

Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.

For the Engine Overhaul Pistons Gaskets Set, distributors and importers can ask for tiered trade pricing on repeat volume, mixed-model consolidation and delivery scheduled to their own sales cycle.

Request a wholesale quote Pricing tiers


Shipping

We ship the Engine Overhaul Pistons Gaskets Set from Dongguan, China with 5 major carriers and same-business-day handling on in-stock items. Consignments of Shipping from China goods are consolidated per destination, and full export documentation (invoice, packing list, certificate of origin on request) accompanies each export order.

Export Incoterms apply to all international delivery. Consignments of the Engine Overhaul Pistons Gaskets Set cross borders under standard B2B terms, with our trade desk preparing destination-market paperwork.

Carton data: carton size and gross weight for the Engine Overhaul Pistons Gaskets Set are confirmed with our team per order — freight is quoted on real carton data rather than estimates.

Shipping policy Global logistics


Buyer feedback

Verified B2B reviews are published after order fulfilment. This engine overhaul rebuild kit is an established wholesale line — request references from our team.

Every order is packed for international wholesale distribution in Dongguan, China.

Common questions — What is included in the kit?; Is this a genuine original part?

Talk to our team


FAQ

Is this a genuine Mercedes-Benz part?+
No. This is an independent aftermarket Overhaul Kit supplied under the Vidishi Auto brand, not a genuine Mercedes-Benz product.
What vehicles or equipment does it fit?+
It is compatible with Mercedes-Benz applications. Send your model, year and engine code and our team confirms the exact match.
What is the MOQ for wholesale?+
The minimum order is 10 pieces, scalable to container loads with volume pricing on request.
What is the lead time for dispatch?+
Lead time is confirmed on the proforma invoice for your quantity and destination; in-stock items are dispatched after payment and fitment verification.
What is your return and warranty policy?+
Returns and warranty follow the terms stated on the proforma invoice for this Vidishi Auto; defective or wrongly shipped items are returnable per those terms.
What is included in the kit?+
The listing content line states the included components; anything not listed is not included.
Is this a genuine original part?+
No. It is a compatible aftermarket overhaul kit matched to the listed engines.
Do you provide fitment verification?+
Yes. Our parts team verifies fitment against your vehicle or equipment details before dispatch.


Related

Global logistics Shipping policy Warranty policy Returns Contact our team Engine System Pistons Brake System

You can forward this shareable product link to a buyer, purchase manager or workshop. It sits in our Pistons range.


Support

Our parts team answers fitment, pricing and technical questions within 24 hours (Mon–Sat, GMT+8).

Order handling: minimum order 10 pieces; single orders and mixed pallets are both quoted per destination.

The Engine Overhaul Pistons Gaskets Set can be consolidated with other lines in the same shipment, and the packing list travels with the goods.

Vidishi Auto is an independent supplier of compatible auto parts and is not affiliated with or endorsed by Mercedes-Benz.

WhatsApp Email support Contact page

Customer Reviews

Reviews

Be the first to review “Overhaul Kit 2760331501 Replacement for M278 4.6/4.7 V8 biturbo”

Your email address will not be published. Required fields are marked *