Piston Kit LR4743587 Replacement for 448PN 4.4L V8 petrol

Piston Kit – compatible replacement for Land Rover, supplied under Vidishi Auto. Wholesale and B2B pricing on request.

$200.00

SKU: range-rover-4-4-piston-rings Category: Tags: , , ,

100% Secure Checkout

Free Shipping Over $1099

Customer Satisfaction

International Shipping

Product Details

At a glance

2 setsMOQ
Pistonscategory
Vidishi Autosupplied brand
448PN 4.4L V8 petrolmodel

Wholesale pricing for the RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings is set per order volume and destination — ask the parts team for a volume quote.


Product overview

The RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings is an aftermarket replacement part supplied under the Vidishi Auto brand and forms part of our Pistons range. It is a compatible replacement built to the same fitment as the original-equipment application, and it is not a genuine original part.

Each piston kit is packed for international wholesale distribution from Dongguan, China and is supplied to distributors, repair shops and e-commerce sellers. Wholesale terms, freight handling and warranty administration are confirmed per order and per destination.

Every order is checked before dispatch for bore diameter measured at top, middle and bottom of the cylinder against the std or oversize spec and ring end-gap measured inside the bore with feeler gauges before installation.

Request a wholesale quote


Specifications

Part type Piston Kit
Supplied brand Vidishi Auto
Reference brand Land Rover
MOQ 2 sets
Condition New, aftermarket
Brand claim None – independent aftermarket part
Place of origin Dongguan, China
Compatible vehicle Land Rover
Model 448PN 4.4L V8 petrol


Fitment check

This kit is intended for Land Rover applications (listed model: 448PN 4.4L V8 petrol). Confirm the application before order. Our team verifies fitment against your vehicle or equipment details — send the model, year and engine code for a precise match.

Fitment verification before dispatch — three checks: (1) send the engine code plate or the number stamped on your old piston or the block; (2) a photo of the removed piston, rings and cylinder liner; (3) the VIN or chassis plate number. Our team confirms fitment against these before your order ships.

Engine codes listed: 448PN 4.4L V8 petrol. Send your engine code and our team confirms the match before you buy.

Checks before dispatch

Bore diameter measured at top, middle and bottom of the cylinder against the STD or oversize spec
Ring end-gap measured inside the bore with feeler gauges before installation
Wrist pin to boss clearance verified within the stated tolerance
Ring pack orientation confirmed: oil rail expander gap staggered away from the pin
Cylinder honing cross-hatch inspected so the new rings can seat

Check fitment via WhatsApp Installation guide

Is this part easy to fit? Difficulty depends on the application and the tools on hand: some applications are a direct bolt-on, others need the assembly removed first. Send us your vehicle or equipment details and we will confirm before you buy.

Fitment risk: model-year and trim variations may apply. Always confirm with our parts team before purchase.


Reference & cross numbers

The RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings is listed below with the cross numbers we hold on file.

Reference brand Land Rover
Compatible vehicle Land Rover
Part type Piston Kit

Verify your part number before ordering

  1. Locate the stamped or printed marking on your original unit — the reference for this product is LR4743587.
  2. Compare the casting or label marking character by character against LR4743587 before you order.
  3. Send us a photo of the marking on WhatsApp and quote LR4743587 so our team can double-check it for you.
  4. Your quotation, proforma invoice and order confirmation each carry reference LR4743587.
  5. Packing slips and export documents list LR4743587 so every carton stays traceable end to end.
  6. If the marking on your part differs from LR4743587, send it anyway — we cross-check it against our catalogue first.
  7. Reorder or spare-part requests should quote LR4743587 to guarantee an identical specification.
  8. Warranty and after-sales cases are logged under reference LR4743587, so coverage is verifiable without the original invoice.

Listed references are for identification and compatibility lookup only. This is an independent aftermarket component supplied under the Vidishi Auto brand, not a genuine Land Rover-branded product.


Key features

Compatible replacement for Land Rover

Compatible replacement under the Vidishi Auto brand, built to the same fitment as the original-equipment application.

MOQ

2 sets.

International wholesale packing

Every order is packed for international wholesale distribution in Dongguan, China.

Fitment verified before dispatch

Fitment is verified against your vehicle or equipment details before dispatch.

Export documentation

Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.


When this kit is needed

A worn or failed RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings can lead to drivability, safety or maintenance issues. Typical symptoms reported by workshops include:

Blue exhaust smoke and rising oil consumption between services
Loss of compression, rough idle and misfire codes on one or more cylinders
Knocking or piston-slap noise on cold starts that fades when warm
Blow-by pressurizing the crankcase and pushing oil past seals
Failed compression or leak-down test pointing at the ring pack

Diagnose the root cause with our diagnostic guide before ordering, and confirm the exact application with our team.


Installation

Clean ring grooves and oil return holes before fitting the new ring set
Stagger the end gaps of the three rings around the piston
Use a ring compressor and align the pin circlips fully in their grooves
Follow the manufacturer torque sequence and angle spec for the connecting rod bolts
Run the break-in cycle with varied load so the rings lap into the honed bore
Confirm fitment against your vehicle or equipment details
Torque fasteners to the maker’s specification
Test and re-check before returning the vehicle to service

Difficulty varies by application. When in doubt, use a qualified workshop. The full installation guide lists the torque figures and the tools needed for this job.


Warranty

Vidishi Auto backs this aftermarket piston kit with a limited warranty against manufacturing defects. Warranty terms follow the product’s packing card and your regional agreement. Cover applies to orders from 2 sets upward.

What is covered: manufacturing defects in the component as supplied. Wear items, damage from incorrect fitting and damage in service are outside cover, as set out in the regional agreement.

Brand position: this is an independent aftermarket part supplied under the Vidishi Auto brand. It is not a genuine Land Rover product and carries no Land Rover approval.

How cover is applied — handling follows the practice used for engine piston and ring set: bore diameter measured at top, middle and bottom of the cylinder against the std or oversize spec. Claims are assessed against that practice and the packing card, not against a generic list.

Making a claim: contact our parts team with the order reference and the part’s packing details; we confirm the next step and the replacement route.

Warranty policy Returns


Wholesale & B2B

We supply RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings to distributors, importers, repair shops and e-commerce sellers with flexible MOQ, volume pricing and export support from Dongguan, China.

MOQ

2 sets — scalable to container loads.

Volume pricing

Volume tiers for the piston kit are quoted per order size and destination.

Export support

Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.

For the RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings, distributors and importers can ask for tiered trade pricing on repeat volume, mixed-model consolidation and delivery scheduled to their own sales cycle.

Request a wholesale quote Pricing tiers


Shipping

We ship the RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings from Dongguan, China with 5 major carriers and same-business-day handling on in-stock items. Consignments of Shipping from China goods are consolidated per destination, and full export documentation (invoice, packing list, certificate of origin on request) accompanies each export order.

Export Incoterms apply to all international delivery. Consignments of the RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings cross borders under standard B2B terms, with our trade desk preparing destination-market paperwork.

Carton data: carton size and gross weight for the RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings are confirmed with our team per order — freight is quoted on real carton data rather than estimates.

Shipping policy Global logistics


Buyer feedback

Verified B2B reviews are published after order fulfilment. This engine piston and ring set is an established wholesale line — request references from our team.

Every order is packed for international wholesale distribution in Dongguan, China.

Common questions — Do I need oversize pistons after a rebore?; Are the rings pre-gapped?

Talk to our team


FAQ

Is this a genuine Land Rover part?+
No. This is an independent aftermarket Piston Kit supplied under the Vidishi Auto brand, not a genuine Land Rover product.
What vehicles or equipment does it fit?+
It is compatible with Land Rover applications. Send your model, year and engine code and our team confirms the exact match.
What is the MOQ for wholesale?+
The minimum order is 2 sets, scalable to container loads with volume pricing on request.
What is the lead time for dispatch?+
Lead time is confirmed on the proforma invoice for your quantity and destination; in-stock items are dispatched after payment and fitment verification.
What is your return and warranty policy?+
Returns and warranty follow the terms stated on the proforma invoice for this Vidishi Auto; defective or wrongly shipped items are returnable per those terms.
Do I need oversize pistons after a rebore?+
Only if the cylinders were machined to the next oversize step; STD pistons fit an unrebored, honed bore.
Are the rings pre-gapped?+
Ring end gap must still be measured and filed to spec inside your actual bore before assembly.
Is this a genuine original part?+
No. It is a compatible aftermarket replacement, verified against the listed reference numbers and engine codes.
Do you provide fitment verification?+
Yes. Our parts team verifies fitment against your vehicle or equipment details before dispatch.


Related

Warranty policy Returns Contact our team Engine System All parts B2B solutions Head Gaskets Fuel System

You can forward this shareable product link to a buyer, purchase manager or workshop. It sits in our Pistons range.


Support

Our parts team answers fitment, pricing and technical questions within 24 hours (Mon–Sat, GMT+8).

Order handling: minimum order 2 sets; single orders and mixed pallets are both quoted per destination.

The RACEORLY LR4743587 Piston Kit STD 88mm 1.2-1.5-2.0 Rings can be consolidated with other lines in the same shipment, and the packing list travels with the goods.

Vidishi Auto is an independent supplier of compatible auto parts and is not affiliated with or endorsed by Land Rover.

WhatsApp Email support Contact page

Customer Reviews

Reviews

Be the first to review “Piston Kit LR4743587 Replacement for 448PN 4.4L V8 petrol”

Your email address will not be published. Required fields are marked *