2722701 Euro 6 Urea Dosing Module for Scania Euro 6 trucks and buses
2722701 for Scania Euro 6 trucks and buses. Model 2722701, 12 Months warranty, MOQ 1 piece. Supplied under the Vidishi Auto brand.
Original price was: $210.00.$205.00Current price is: $205.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| Weight | 2.0 kg |
|---|---|
| Dimensions | 25 × 19 × 22 cm |
| make | |
| model | Scania G-series, Scania K-series bus, Scania N-series bus, Scania P-series, Scania R-series, Scania S-series |
| position |
Product Details
At a glance
Check fitment before you order
Built to model 2722701 and supplied new under the Vidishi Auto brand. The 10 specification rows below run from emission standard through to packaged size; a row is only listed where the value is confirmed for this part.
Part number match
The order reference for this item is 2722701, built to model
2722701. Quote that model number on the order and on the packing
list so the correct variant is picked.
Fitment verification
Fits Scania Euro 6 SCR systems on P, G, R and S series trucks and K and N series buses that run the 2722701 dosing module. Contaminated or off-specification AdBlue is the usual cause of a blocked dosing nozzle; flush the AdBlue circuit before fitting the replacement module.
Read the number stamped on the unit being replaced and the
engine code plate, then compare both with the numbers published on this page
before ordering. This three-step check (part number — engine code plate —
published reference) is how fitment is confirmed.
How fitment is confirmed
Three checks confirm fitment before the order ships: the engine code or the VIN read off the vehicle plate or the machine registration, the part number stamped on the unit being replaced, and a photograph of that unit with the number legible. Where the chassis plate is the only reference available, send the engine code with the enquiry and the match is confirmed from it.
Category
This item sits in the site’s Exhaust System category. Ordering it from this page keeps
the line in one category, so a mixed order covering several nozzle or fuel system
items can be picked as a single shipment.
Specifications
| Emission standard | Euro 6 |
|---|---|
| Operating voltage | 24 V |
| Function | Metered urea (AdBlue) dosing into the exhaust stream |
| Housing | Cast base with a sealed electronics cover |
| Electrical connection | Multi-pin sealed connector |
| Fluid ports | Two hose spigots on the dosing head |
| Mounting | Flange with three bolt holes |
| Module dimensions | 110 mm length, 78 mm height, 155 mm width (published) |
| Unit weight | 2 kg per piece (published shipping data) |
| Packaged size | 25 x 19 x 22 cm (published shipping data) |
| Model number | 2722701 |
| Reference | 2722701 |
| Product type | Urea Dosing Module |
| Supplied brand | Vidishi Auto (not Scania-branded) |
| Reference design | reference only — compatible replacement |
| Application | Scania Euro 6 trucks and buses |
| Material | Cast aluminium base with a sealed electronics cover and stainless fluid ports |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 piece |
| Reference part numbers | 2722701, 2238325, 2238324, 2095566, 0573163 |
| Cross-reference | Scania equipment identification only |
Two rows on this table decide most enquiries about the item: emission standard and housing. The remaining 8 rows separate this build from the neighbouring variants in the same family, so a buyer who reads only the first two should still check the rest against the unit being replaced.
Specification rows describe the item supplied under the Vidishi Auto brand. Packaged shipping weight and carton size are published for this item: 2.0 kg packed, carton 25 x 19 x 22 cm. They are the packed figures, not the bare part mass.
What the buyer gets
The first eight of the 10 published specification rows are set out below. The rest are
in the specification table above.
Emission standard
Euro 6
Buyers ask for this one on almost every enquiry, so it is stated rather than buried in the table.
Operating voltage
24 V
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Function
Metered urea (AdBlue) dosing into the exhaust stream
Buyers ask for this one on almost every enquiry, so it is stated rather than buried in the table.
Housing
Cast base with a sealed electronics cover
This variant separates itself from the neighbouring models in the same family.
Electrical connection
Multi-pin sealed connector
This variant separates itself from the neighbouring models in the same family.
Fluid ports
Two hose spigots on the dosing head
This figure selects the variant rather than promising performance; the equipment documentation governs.
Mounting
Flange with three bolt holes
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Module dimensions
110 mm length, 78 mm height, 155 mm width (published)
The bench test has to reproduce this number before the part is released.
How it is used
Sequence
- Depressurise the AdBlue circuit and protect the connectors from urea run-off before removing the module.
- Check the AdBlue for contamination and flush the supply and return lines before fitting the replacement.
- Wet the seals with clean AdBlue and seat the module squarely on its flange.
- Torque the flange fixings in a diagonal sequence and reconnect the multi-pin plug until it clicks.
- Clear the SCR fault memory and run a dosing test before the vehicle returns to work.
Have these to hand first
- Flange seal for the dosing head
- AdBlue to ISO 22241 from a sealed container
- New spring clips for the hose spigots
The list is what the job consumes, not part of the item supplied
unless a specification row above says so.
or the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and things that go wrong
Contaminated AdBlue is the usual cause of a blocked dosing nozzle, so a new module fitted into a dirty circuit fails again.
The module is a Euro 6 SCR component; fitting it cannot make a non-compliant vehicle compliant.
Any leak at the dosing head will crystallise and disturb the spray pattern, so the flange seal and the spout are checked at every service.
The two independent supplier datasheets agree on the part-number family (2722701 / 2238325 / 2238324 / 2095566 / 0573163), the 24 V supply and the Euro 6 application; only one of them states a single-unit shipping weight and carton size, and that is the record published here.
Module outline dimensions (110 x 78 x 155 mm) come from the supplier datasheet and describe the module, not the carton.
Reference brand Scania is used descriptively to identify the equipment the module fits; the page brand is the house brand and the schema brand is the house brand.
Symptom and first check
| SCR warning with a correct AdBlue level | read the fault memory and the dosing test result before changing the module. |
|---|---|
| Urea crystallising around the dosing head | the flange seal is weeping or the nozzle does not close fully. |
| Dosing test passes but NOx stays high | the fault is downstream in the catalyst, not in the module. |
How we label data on this page
| Model number 2722701 | Published — stated on the specification table above |
|---|---|
| Product type and application | Published — stated on the specification table above |
| Fitment and duty limits | Confirm before order — must be checked against the equipment the item works on |
| Packaged shipping weight | Published — 2.0 kg, carton 25 × 19 × 22 cm |
| Carton dimensions for multi-unit orders | Not published — quoted with the order against the actual quantity |
| Injector coil resistance | Not published — the documentation available for this item does not state it |
| Dosing quantity per pulse | Not published — the documentation available for this item does not state it |
| Connector pin-out | Not published — the documentation available for this item does not state it |
confirm. Ratings are stated exactly as the manufacturer documents them; nothing on this
page extends them, and a value we cannot confirm is marked Not published rather than
guessed.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page.
- Confirm the model number 2722701 on the packing list matches the item received.
- Read the 10 specification rows that apply to your application before first use.
- Protect the electronics connector before any AdBlue is released, because urea residue attacks the pins.
- Clear the SCR fault codes after fitting and run a dosing test before the vehicle is released.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Check the AdBlue for haze or sediment before fitting the module, and log the dosing test result with the vehicle file.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this urea dosing module is used
Fits Scania Euro 6 SCR systems on P, G, R and S series trucks and K and N series buses that run the 2722701 dosing module. Contaminated or off-specification AdBlue is the usual cause of a blocked dosing nozzle; flush the AdBlue circuit before fitting the replacement module.
This urea dosing module is supplied for Scania Euro 6 trucks and buses. The application list below is built from the published fitment data for this part number rather than a generic catalogue sweep, which is why it is shorter and more specific than a parts-finder list.
- Scania P-series
- Scania G-series
- Scania R-series
- Scania S-series
- Scania K-series bus
- Scania N-series bus
Fitment verification: Fits Scania Euro 6 SCR systems on P, G, R and S series trucks and K and N series buses that run the 2722701 dosing module. Contaminated or off-specification AdBlue is the usual cause of a blocked dosing nozzle; flush the AdBlue circuit before fitting the replacement module.
The application list is a guide, not a guarantee of fit. Confirm the
model number on the unit and the part number being replaced before ordering.
Quality and inspection
in-process inspection
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The urea dosing module is built to model
2722701 and packed against that model number.
Specification count
10 specification rows are listed on this page for the urea dosing module, from emission standard to packaged size.
exact part; anything else is marked Not published rather than guessed.
Related search terms
A buyer searching urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is emission standard: Euro 6. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching euro 6 urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is operating voltage: 24 V. It appears on the specification table above as well, so page and order agree.
A buyer searching bill gates warned the world is going backwards is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is function: Metered urea (AdBlue) dosing into the exhaust stream. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching kenjah beyond the gates ethnicity is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is housing: Cast base with a sealed electronics cover. It is the value the test bench has to reproduce before the part is released.
A buyer searching def dosing valve is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is electrical connection: Multi-pin sealed connector. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching ninth gate of the kingdom of shadows is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is fluid ports: Two hose spigots on the dosing head. It separates this build from the neighbouring variants in the same family.
A buyer searching el gato pardo is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is mounting: Flange with three bolt holes. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching el gato pelicula is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is module dimensions: 110 mm length, 78 mm height, 155 mm width (published). It appears on the specification table above as well, so page and order agree.
A buyer searching el gato penthouse is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is unit weight: 2 kg per piece (published shipping data). The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching scr module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is packaged size: 25 x 19 x 22 cm (published shipping data). It is the value the test bench has to reproduce before the part is released.
A buyer searching dayco snowmobile drive belts is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is emission standard: Euro 6. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching polyurea pump is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is operating voltage: 24 V. It separates this build from the neighbouring variants in the same family.
A buyer searching adblue pump is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is function: Metered urea (AdBlue) dosing into the exhaust stream. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching a0001405339 urea pump is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is housing: Cast base with a sealed electronics cover. It appears on the specification table above as well, so page and order agree.
A buyer searching urea pump is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is electrical connection: Multi-pin sealed connector. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching def dosing rate percentage of diesel fuel is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is fluid ports: Two hose spigots on the dosing head. It is the value the test bench has to reproduce before the part is released.
A buyer searching 2500 watt subs is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is mounting: Flange with three bolt holes. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching adblue injector nozzle is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is module dimensions: 110 mm length, 78 mm height, 155 mm width (published). It separates this build from the neighbouring variants in the same family.
A buyer searching adblue injector is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is unit weight: 2 kg per piece (published shipping data). That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching josh gates meet and greet tickets is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is packaged size: 25 x 19 x 22 cm (published shipping data). It appears on the specification table above as well, so page and order agree.
A buyer searching josh gates titan episode is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is emission standard: Euro 6. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching road gates for highways is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is operating voltage: 24 V. It is the value the test bench has to reproduce before the part is released.
A buyer searching urea dosing module for scania p-series is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is function: Metered urea (AdBlue) dosing into the exhaust stream. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching urea dosing module for scania g-series is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is housing: Cast base with a sealed electronics cover. It separates this build from the neighbouring variants in the same family.
A buyer searching urea dosing module for scania r-series is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is electrical connection: Multi-pin sealed connector. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching urea dosing module for scania s-series is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is fluid ports: Two hose spigots on the dosing head. It appears on the specification table above as well, so page and order agree.
A buyer searching urea dosing module for scania k-series bus is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is mounting: Flange with three bolt holes. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching urea dosing module wholesale is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is module dimensions: 110 mm length, 78 mm height, 155 mm width (published). It is the value the test bench has to reproduce before the part is released.
A buyer searching urea dosing module supplier is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is unit weight: 2 kg per piece (published shipping data). Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching bulk urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is packaged size: 25 x 19 x 22 cm (published shipping data). It separates this build from the neighbouring variants in the same family.
A buyer searching urea dosing module manufacturer is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is emission standard: Euro 6. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching urea dosing module factory direct is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is operating voltage: 24 V. It appears on the specification table above as well, so page and order agree.
A buyer searching urea dosing module distributor is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is function: Metered urea (AdBlue) dosing into the exhaust stream. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching urea dosing module for workshop is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is housing: Cast base with a sealed electronics cover. It is the value the test bench has to reproduce before the part is released.
A buyer searching urea dosing module OEM equivalent is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is electrical connection: Multi-pin sealed connector. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching urea dosing module export is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is fluid ports: Two hose spigots on the dosing head. It separates this build from the neighbouring variants in the same family.
A buyer searching urea dosing module scania euro 6 trucks and buses is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is mounting: Flange with three bolt holes. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching 2722701 urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is module dimensions: 110 mm length, 78 mm height, 155 mm width (published). It appears on the specification table above as well, so page and order agree.
A buyer searching 2238325 urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is unit weight: 2 kg per piece (published shipping data). The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching 2238324 urea dosing module is normally matching a job on the Scania Euro 6 trucks and buses, and the deciding check is packaged size: 25 x 19 x 22 cm (published shipping data). It is the value the test bench has to reproduce before the part is released.
The search terms above are the type term and its model-qualified form,
collected from the specification table published on this page; each one maps to a
model-number-matched line on the order.
Wholesale and B2B supply
Euro 6 urea dosing modules for Scania fleets, SCR repair specialists and commercial-vehicle parts distributors, quoted per order.
- Minimum order: 1 piece
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total. Model
2722701, MOQ 1 piece, 12 Months warranty – wholesale, container and
consolidated pricing on request.
Pricing is quoted per order. This page carries no published tariff.
Orders are picked against the model number, packed in export cartons with the image list enclosed, and can be consolidated with other lines from the same category.
Lead time is quoted with the order against the destination and the
quantity, and is confirmed before production starts.
Choosing between options
| New dosing module | straight replacement, no core, the shortest downtime |
|---|---|
| Remanufactured module | lower cost, but the electronics history is unknown |
| Cleaning the existing module | sometimes viable when the nozzle alone is blocked, and the cheapest first step |
For an SCR system the deciding question is whether the fault sits in the module or downstream in the catalyst, because only one of them is fixed by a replacement module.
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
6 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frame by frame: Dosing head and spigots from above; Sealed cover on the cast base; Dosing element in the flange plate; Connector face and flange holes; Number cast into the base; Marked cover with connector underneath.
The same file names appear in the image list issued with the order.
Frequently asked questions
Is this a genuine Scania product?
No. It is a compatible replacement supplied under the Vidishi Auto brand to the specification published on this page. It is not a genuine Scania product and is not affiliated with Scania. It is not a Scania-branded product. Where a reference part number appears it identifies the equipment being replaced, not an original-equipment product, and no affiliation with Scania is claimed.
What does model 2722701 cover?
10 specification rows are published for it, from emission standard to packaged size. The delivered material is Cast aluminium base with a sealed electronics cover and stainless fluid ports and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Fits Scania Euro 6 SCR systems on P, G, R and S series trucks and K and N series buses that run the 2722701 dosing module. Contaminated or off-specification AdBlue is the usual cause of a blocked dosing nozzle; flush the AdBlue circuit before fitting the replacement module.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 piece, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. Every frame on this page shows this exact item.
What is the lead time on this item?
Lead time is quoted per order against the model number, the quantity and the destination, and it is confirmed on the order acknowledgement before production starts. Consolidated shipments follow the same confirmation.
What happens if it does not fit?
Returns are handled under the site returns policy. Fitment is confirmed by the model number and the number stamped on the unit being replaced before dispatch, which is what keeps a wrong-part return from happening in the first place.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Support and ordering information
Need this part matched?
Send the model number or the part number stamped on the unit you are replacing, and
we return the matched item with a delivered quotation. Technical answers always
match the specification shown above, so what we quote and what you read here never
disagree.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Order checklist
- Model number: 2722701
- Reference part number: 2722701
- Minimum order: 1 piece
- Warranty: 12 Months
- Brand: Vidishi Auto
Reviews