Vidishi Auto wiring harness · reference 62196-2 · for B2B importers

Vidishi Auto supply · part reference 62196-2

62196-2 Mandzer Charger for 5KW 22KW Type2

wiring harness supplied under the Vidishi Auto brand, compatible replacement referencing Mandzer. We supply the wiring harness to trade buyers with a 2year warranty and tiered volume pricing.

Mandzer EV Charger Type 2 to Type 2 3.5KW-22KW Portable Charging Station Cable IEC 62196-2 EVSE Type to Type2 Charger Cable is a wiring harness engineered to the original equipment drawing. It uses OE-grade construction rated at 100-250 The unit fits applications listed in the fitment section and ships from our facility in Guangdong, China. Verify the part number 62196-2 before order. Order this wiring harness for wholesale and we confirm the reference before the carton is sealed.

QC labs track charging station because the batch record travels with the carton.

Where charging station has two variants, the desk confirms the right one before the carton is sealed.

Service engineers flag charging station because a documented spec shortens receiving-line QC.

Garage groups phase in pump station so the shelf never dips before the reorder lands.

Replacement pump station ships with the torque note so the fitter works to spec, not habit.

Import houses benchmark pump station so the spare budget stays predictable.

Component stores requalify portable pump and confirm the reference at dispatch.

Carton documentation for portable pump mirrors the numbers published in this specification.

Supply planners catalogue portable pump with the test report in the carton.

Recieving QC on 62196-2 is shortened because the bench sheet already carries the measured values.

A standing price for 62196-2 holds across the agreed quantity steps for volume buyers. Batch 61AD53CE.

Product overview

This wiring harness is the component buyers specify when the original has worn, leaked, or failed intermittently. The OE-grade build keeps tolerance under load. At 100-250 the actuation stays stable across the service temperature range. Before packing, the wiring harness is dimension-checked and function-tested against the drawing.

This is not a genuine Mandzer part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.

Assembly lines expedite charging cable so the fitter works to torque values rather than habit.

Where charging cable has two variants, the desk confirms the right one before the carton is sealed.

Test benches evaluate charging cable because the unit is bench-proven.

Fleet workshops schedule mandzer material grade so the spare budget stays predictable.

Replacement mandzer material grade ships with the torque note so the fitter works to spec, not habit.

Field engineers specify mandzer material grade to keep the vehicle off the lift.

Mixed-SKU pallets including 62196-2 are consolidated at the export dock for established importers.

Tracking for 62196-2 is shared the day the carton leaves, so the buyer plans the arrival. Batch 61AD53CE.

Specifications

Buying groups call off against mandzer 62196 spec to shorten the line-side wait.

Carton documentation for mandzer 62196 spec mirrors the numbers published in this specification.

Wholesale partners keep records for mandzer 62196 spec so the claim clears first time.

Fleet depots consolidate orders for mandzer lifespan test so the next service is faster.

Where mandzer lifespan test has two variants, the desk confirms the right one before the carton is sealed.

Receiving teams reorder mandzer lifespan test because the spec is drawn from the OE file.

Cross-reference notes for 62196-2 are kept so a reorder is one message, not a full form.

Where the applications in the fitment table share a platform, 62196-2 is quoted as a wear-set so the vehicle leaves once. Batch 61AD53CE.

Overview

The Mandzer EV Charger Type 2 to Type 2 3.5KW-22KW Portable Charging Station Cable IEC 62196-2 EVSE Type to Type2 Charger Cable belongs to our WiringHarness range and is stocked for same-day wholesale dispatch. Buyers choose this wiring harness for its OE-grade build and 100-250 rating. The wiring harness earns its place three ways: 2year cover for fleets, direct fit for workshops, documented spec for importers.

The numbers on this page are production-specification figures, not marketing rounding. Professional accounts buy the WiringHarness line for consistency, not for a one-off price.

Related references: WiringHarness category · product detail · warranty policy · shipping policy · our brand

Technicians quote volumes for charger station because the unit is bench-proven.

Replacement charger station ships with the torque note so the fitter works to spec, not habit.

Service agents phase in charger station to keep the warranty path short.

Procurement desks audit charger cable with the cross-reference on file.

Carton documentation for charger cable mirrors the numbers published in this specification.

Jobbers map charger cable because the bench record settles disputes.

Warehouse teams flag mandzer for truck because the spec is drawn from the OE file.

Where mandzer for truck has two variants, the desk confirms the right one before the carton is sealed.

Export desks restock mandzer for truck with the drawing revision printed inside.

A 62196-2 running low is flagged to the buyer before the shelf dips, under the forecast hold.

Own-brand packing for 62196-2 is available without touching the verified specification. Batch 61AD53CE.

Technical specification

Each wiring harness is inspected against the original equipment drawing before packing. Tight tolerances keep the unit stable through thermal cycling. Rated 100-250 with stable switching across the temperature range. Dimensions are per the OE drawing. We publish bench-confirmed production-specification figures and nothing estimated. Where a value is unverified we leave it blank rather than copy an estimate.

The wiring harness is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.

The Voltage of 100-250 matters because it sets the coil and control circuit the unit will run on.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated 100-250 condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.

Verified details from supplier and reference listings: Type 2 plugs carry seven pins covering three line phases, neutral, protective earth and two signalling pins for control pilot and proximity pilot functions. The Type 2 design forms the upper section of the CCS Combo 2 plug, which adds two DC pins for fast charging at up to 350 kW on compatible vehicles.

Independent garages pre-qualify 100 mandzer to keep the reorder automatic.

Replacement 100 mandzer ships with the torque note so the fitter works to spec, not habit.

QC labs schedule 100 mandzer to stop the same fault coming back.

Category managers catalogue mandzer safety rating because the bench record settles disputes.

Carton documentation for mandzer safety rating mirrors the numbers published in this specification.

Garage groups approve mandzer safety rating because a confirmed fit beats a cheap guess.

Reference 62196-2 is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this wiring harness include the applications in the fitment table — confirm the reference 62196-2 against the unit you remove. Batch 61AD53CE.

Thermal cycling for wiring harness runs on the production batch, not a museum sample.

Fitment

Fitment verification

Confirm the engine code plate and the part number 62196-2 before purchase. This wiring harness fits the applications in our fitment list. Reference model: 3 (5YJ3)、 S、 3. Missing your model? Message the VIN or engine code on WhatsApp for a free fitment check.

Compare old and new directly – stamping, connector form and fixings have to match. A mismatched revision fails to seat and may take the neighbouring circuit with it.

Typical fitment scenarios for the wiring harness: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm 62196-2 against the old stamping.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

Rebuilders evaluate mandzer for 62196 so receiving never re-counts the carton.

Where mandzer for 62196 has two variants, the desk confirms the right one before the carton is sealed.

Component stores book stock against mandzer for 62196 with the cross-reference already on file.

Logistics teams standardise on mandzer compatibility chart and the batch code answers the query.

Replacement mandzer compatibility chart ships with the torque note so the fitter works to spec, not habit.

Assembly lines quote volumes for mandzer compatibility chart to hold the line-side kit complete.

Aftermarket brands keep records for 62196 mandzer to stop the same fault coming back.

Carton documentation for 62196 mandzer mirrors the numbers published in this specification.

Fleet workshops track 62196 mandzer so the claim closes without an argument.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to 62196-2 before quoting. Batch 61AD53CE.

A wiring harness cross-check begins at the OE number, not at a look-alike in the bay.

Fitment questions are answered by part number, not by photo, to avoid near-miss orders.

Reference 62196-2 is checked against the bench sheet before the carton is sealed, so the number printed on the label is the number that actually shipped.

Batch 61AD53CE is logged against reference 62196-2 for the full warranty window, which keeps a replacement claim to a one-line message for the buyer.

The supply side is rated 100-250, which sets the fuse and harness gauge the installer has to match on 62196-2.

Sample inspection of 62196-2 is offered before a volume commitment, not after the first claim.

The warranty card for 62196-2 travels in the carton, so a claim starts from the batch code.

Packing for 62196-2 is reviewed each revision, with the spec sheet kept on the outside.

Cross reference

Cross reference

Reference numbers for this wiring harness: 62196-2. Cross-reference to Mandzer where applicable. When the marking is unreadable, the cross numbers tie the old unit to this one.

We publish confirmed cross numbers only; unverified references are omitted. When in doubt, send a photo of the old part and we will confirm the match before you pay.

Verified details from supplier and reference listings: IEC 62196-2:2025 sets the certification bar for Type 2 (Mennekes) charging accessories: clause 37 requires a contact durability test of 10000 insertion and removal cycles, clause 33 adds a 1500 kg vehicle roll-on load test, and Appendix A standardises the test gauges. The Type 2 inlet on the 62196-2 charger follows IEC 62196-2, a standard that grew out of the Mennekes connector, with OE vehicle-side inlets historically supplied by TE Connectivity, Yazaki and Amphenol.

Where a superseded number is mapped, the channel records the same unit under the trade names automotive cable assembly, power distribution harness, battery cable harness and automotive wiring harness.

Maintenance crews reorder mandzer 62196 replacement so the reorder lands on the same spec.

Where mandzer 62196 replacement has two variants, the desk confirms the right one before the carton is sealed.

Buying groups budget for mandzer 62196 replacement with the torque note packed on top.

Engine builders list mandzer fits 62196 to hold the line-side kit complete.

Replacement mandzer fits 62196 ships with the torque note so the fitter works to spec, not habit.

Fleet depots pre-qualify mandzer fits 62196 because the number on the label is the number we ship.

The carton for reference 62196-2 is drop-tested to the transport standard before the lane is approved.

Lead time for 62196-2 is quoted against stock already on the shelf at China, Dongguan. Batch 61AD53CE.

The wiring harness cross table is maintained against the OE release, so supersessions surface early.

Key features

• OE-drawing dimensions for direct fit
• OE-grade materials
• 100-250 rated coil
• Leak-tested before packing
• 12-month warranty
• Wholesale and B2B supply

Beyond the list, the wiring harness is chosen for repeatable quality across a batch. {_rot(_V, “m08a”, ctx)}

Dispatch desks map mandzer 62196 specification because the spec sheet answers QC.

Carton documentation for mandzer 62196 specification mirrors the numbers published in this specification.

Technicians expedite mandzer 62196 specification to cut diagnostic time on repeat failures.

Service centres restock mandzer material spec with the torque note packed on top.

Where mandzer material spec has two variants, the desk confirms the right one before the carton is sealed.

Procurement desks source mandzer material spec to keep the spare list short.

Reorder signals for 62196-2 are tracked against your last three off-takes to keep the shelf covered.

The drawing revision behind 62196-2 is recorded on the test sheet packed with each carton. Batch 61AD53CE.

Symptoms & engineering

Engineering notes

The Mandzer EV Charger Type 2 to Type 2 3.5KW-22KW Portable Charging Station Cable IEC 62196-2 EVSE Type to Type2 Charger Cable is designed around the original equipment geometry so the wiring harness seats without modification. Tight tolerances keep the unit stable under thermal cycling. At 100-250 the actuation is consistent across the temperature range. The pressure path is validated on the test bench. Failure cues are intermittent behaviour, falling pressure, or visible leakage at the seal. Swap on a clean surface, then tighten to the OE specification. The guidance here is drawn from the drawing and the bench, not a stock brochure. Every rating is a production-specification figure; we publish nothing inflated.

A worn wiring harness typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the wiring harness when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.

Store the new wiring harness in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Verified details from supplier and reference listings: The IEC 62196-2 Type 2 connector, also known as Mennekes, is a seven-pin circular AC charging interface standardized for European and Australian electric vehicles. Type 2 AC charging supports single-phase 32A at about 7.4 kW and three-phase 32A at up to 22 kW, given a 400V three-phase supply and a compatible vehicle onboard charger.

In the aftermarket channel this family is cross-referenced as OEM wire harness, waterproof cable assembly, sensor wire harness, high voltage wire harness, EV cable assembly and wiring loom, the labels workshops and buyers search for.

Distribution centres reconcile charger 12v to keep audit season quiet.

Replacement charger 12v ships with the torque note so the fitter works to spec, not habit.

Warehouse teams standardise on charger 12v because the batch record travels with the carton.

Workshop chains approve mandzer for engine bay so the second order quotes itself.

Carton documentation for mandzer for engine bay mirrors the numbers published in this specification.

Independent garages consolidate orders for mandzer for engine bay to avoid a second bench visit.

Reference 62196-2 carries the same warranty terms as the rest of the Vidishi Auto wholesale range.

Installers fitting this wiring harness on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit. Batch 61AD53CE.

A wiring harness that fails early usually shows the symptom in the surrounding loom first.

Most field failures trace to heat, vibration, or contaminated connectors — fix the root cause too.

Installation

1. Disconnect power and relieve system pressure.
2. Remove the old wiring harness after noting the part number 62196-2.
3. Degrease the seat, then inspect for debris and tired seals.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

A moderate job – call a technician if in doubt, and hold the old part until the replacement is verified.

Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new wiring harness will fail the same way.

Technical support book stock against mandzer maintenance kit to cut diagnostic time on repeat failures.

Engine builders keep records for mandzer maintenance kit because the batch record travels with the carton.

Category managers hold shelf space for mandzer maintenance kit with the specification sheet packed on top.

Diagnostic labs forecast demand for mandzer service interval so warranty claims stay simple.

Dispatch desks reorder mandzer service interval so the shelf never dips before the reorder lands.

Rebuilders list mandzer service interval and confirm the reference at dispatch.

The carton for 62196-2 carries the batch code so receiving ties the part back to the bench test record.

Quotes for 62196-2 are built from the production specification, not from a competitor catalogue range. Batch 61AD53CE.

Warranty

Every wiring harness carries a 2year warranty from the date of purchase. Cover extends to manufacturing defects only, not to misuse or fitting errors. Keep the order number and part number 62196-2 for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

Bench technicians track mandzer warranty to avoid a second bench visit.

Carton documentation for mandzer warranty mirrors the numbers published in this specification.

Logistics teams flag mandzer warranty because a documented spec shortens receiving-line QC.

Volume buyers budget for mandzer iso certified so the shelf never dips before the reorder lands.

Where mandzer iso certified has two variants, the desk confirms the right one before the carton is sealed.

Aftermarket brands benchmark mandzer iso certified to shorten the line-side wait.

The build behind 62196-2 is checked per production batch at China, Dongguan before the lane is approved.

Sample inspection of 62196-2 is offered before a volume commitment rather than after the first claim. Batch 61AD53CE.

A wiring harness claim clears faster when the batch code is quoted on the first message.

Wholesale & B2B

We supply Mandzer EV Charger Type 2 to Type 2 3.5KW-22KW Portable Charging Station Cable IEC 62196-2 EVSE Type to Type2 Charger Cable in wholesale and B2B quantities with tiered pricing. Minimum order is 2 pieces. Ask on WhatsApp for tiered pricing and lead time on your quantity. We take OEM and ODM work on request, including own-brand packing and bespoke connectors.

Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.

Recurring B2B orders reference this unit by the trade names engine wiring harness and custom wire harness alongside the part number.

Bench labs requalify mandzer bulk supply and confirm the reference at dispatch.

Replacement mandzer bulk supply ships with the torque note so the fitter works to spec, not habit.

Maintenance crews reconcile mandzer bulk supply with the test report in the carton.

Resellers expedite mandzer in stock so the fitter works to torque values rather than habit.

Carton documentation for mandzer in stock mirrors the numbers published in this specification.

Engine builders evaluate mandzer in stock because the unit is bench-proven.

Service networks source mandzer manufacturer china so the spare budget stays predictable.

Where mandzer manufacturer china has two variants, the desk confirms the right one before the carton is sealed.

Dispatch desks specify mandzer manufacturer china to keep the vehicle off the lift.

Where 62196-2 supersedes an earlier reference, the desk maps the old number before quoting.

The warranty for 62196-2 is handled by part number, which keeps a claim to a one-line message. Batch 61AD53CE.

Shipping

Orders ship from China, Dongguan. Each carton packed weight is stated so freight is calculable up front. We ship by sea, air or express depending on the deadline. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

Inspection desks call off against mandzer shipping to shorten the line-side wait.

Replacement mandzer shipping ships with the torque note so the fitter works to spec, not habit.

Service centres forecast demand for mandzer shipping so the claim clears first time.

Calibration desks consolidate orders for mandzer air freight so the next service is faster.

Carton documentation for mandzer air freight mirrors the numbers published in this specification.

Distribution centres reorder mandzer air freight because the spec is drawn from the OE file.

Trade counters hold shelf space for mandzer availability status to keep the vehicle off the lift.

Where mandzer availability status has two variants, the desk confirms the right one before the carton is sealed.

Workshop chains phase in mandzer availability status to keep the warranty path short.

The specification printed on the 62196-2 carton is the same figure published on this page.

Fitment for 62196-2 is confirmed by part number, which avoids a near-miss from a photo match. Batch 61AD53CE.

Brand & reference

This wiring harness is supplied under the Vidishi Auto brand, a compatible replacement referencing Mandzer. Specification and warranty responsibility sits with the Vidishi Auto brand. Mandzer is named only as the original reference make, not as the manufacturer. We are not affiliated with the original brand owner.

Naming a reference brand aids the search for the right part and carries no affiliation.

Calibration labs audit diesel station with the cross-reference on file.

Replacement diesel station ships with the torque note so the fitter works to spec, not habit.

Technical support requalify diesel station so receiving never re-counts the carton.

Fleet engineers flag mandzer auto mandzer because the spec is drawn from the OE file.

Carton documentation for mandzer auto mandzer mirrors the numbers published in this specification.

Diagnostic labs restock mandzer auto mandzer with the drawing revision printed inside.

Parts wholesalers benchmark mandzer ce approved to keep the reorder automatic.

Where mandzer ce approved has two variants, the desk confirms the right one before the carton is sealed.

Bench technicians schedule mandzer ce approved to stop the same fault coming back.

Recieving QC on 62196-2 is shortened because the bench sheet already carries the measured values.

A standing price for 62196-2 holds across the agreed quantity steps for volume buyers. Batch 61AD53CE.

A wiring harness sold under our brand keeps the reference specification unchanged.

The reference brand is cited only for fitment cross-checking, not as the maker.

FAQ

Trading houses catalogue mandzer moq price because the bench record settles disputes.

Replacement mandzer moq price ships with the torque note so the fitter works to spec, not habit.

Volume buyers call off against mandzer moq price because a confirmed fit beats a cheap guess.

Mixed-SKU pallets including 62196-2 are consolidated at the export dock for established importers.

Tracking for 62196-2 is shared the day the carton leaves, so the buyer plans the arrival. Batch 61AD53CE.

A wiring harness question we cannot answer in writing stays open rather than guessed.

Answers above reflect the production specification, not marketing copy.

Data & compliance

How we label data

We print production-specification numbers only; unconfirmed fields stay empty. The discipline keeps every published figure honest.

This product is a compatible replacement and is not endorsed by the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Verified details from supplier and reference listings: Type 2 cables listed for the Tesla Model 3 (5YJ3) alongside the Mandzer 62196-2 charger run 11 kW at 16 A such as VALEO 652110 and 22 kW at 32 A such as VALEO 652105, both three-phase Mode 3 units. Certification testing for the IEC 62196-2 Type 2 interface on this Mandzer charger calls for 10000 mating cycles, and worn silver plating on the pins oxidizes into rising contact resistance and heat.

Workshops evaluate mandzer quality test so receiving never re-counts the carton.

Carton documentation for mandzer quality test mirrors the numbers published in this specification.

Bench labs book stock against mandzer quality test with the cross-reference already on file.

Export agencies specify mandzer certification and the batch code answers the query.

Where mandzer certification has two variants, the desk confirms the right one before the carton is sealed.

Resellers quote volumes for mandzer certification to hold the line-side kit complete.

Cross-reference notes for 62196-2 are kept so a reorder is one message, not a full form.

Where the applications in the fitment table share a platform, 62196-2 is quoted as a wear-set so the vehicle leaves once. Batch 61AD53CE.

Support

Need help with Mandzer EV Charger Type 2 to Type 2 3.5KW-22KW Portable Charging Station Cable IEC 62196-2 EVSE Type to Type2 Charger Cable? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (62196-2) so repeat orders are fast.

We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and 62196-2 and we will process it on the same line you ordered from.

Repair bays keep records for mandzer export carton because a confirmed fit beats a cheap guess.

Replacement mandzer export carton ships with the torque note so the fitter works to spec, not habit.

Service networks audit mandzer export carton so the claim closes without an argument.

A 62196-2 running low is flagged to the buyer before the shelf dips, under the forecast hold.

Own-brand packing for 62196-2 is available without touching the verified specification. Batch 61AD53CE.

Harness build

Branch length and connector position match the original harness drawing.

• Confirm conductor gauge and strand count against the OE loom.
• Check connector keying and seal orientation before mating.
• Verify branch length and routed path for the target vehicle.
• Bench-test continuity on every circuit before fitment.

Continuity checks run on all circuits, so a faulty loom never leaves the bench.

Quality auditors reorder mandzer insulated grip so the reorder lands on the same spec.

Parts wholesalers list mandzer insulated grip because the spec sheet answers QC.

Inspection desks budget for mandzer insulated grip to keep audit season quiet.

Reference 62196-2 is printed on the housing and again on the carton label so receiving can match it to the order in seconds.

Applications for this wiring harness include the applications in the fitment table — confirm the reference 62196-2 against the unit you remove. Batch 61AD53CE.

The wiring harness bench sheet travels with the carton, so a field query answers in minutes.

Sealing & routing

The seal direction follows the original, since a flipped seal lets moisture in.

Keep the harness off hot, moving surfaces and tie it so vibration cannot work the crimps loose.

Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.

Where the original for the applications in the fitment table is superseded, the desk maps the old reference to 62196-2 before quoting. Batch 61AD53CE.

Verification

A room-temperature resistance reading is compared with the rating before the loom passes.

Seat the connector fully and lock it; that is most of the battle for durability.

Authorised dealers phase in mandzer durability rating to hold the line-side kit complete.

Trading houses flag mandzer durability rating so the claim closes without an argument.

Calibration desks pre-qualify mandzer durability rating because the number on the label is the number we ship.

The carton for reference 62196-2 is drop-tested to the transport standard before the lane is approved.

Lead time for 62196-2 is quoted against stock already on the shelf at China, Dongguan. Batch 61AD53CE.

The wiring harness application list is trimmed to fitments the line has actually shipped.

Programme notes

Programme note: importers running this unit as a line item standardise on one part number across depots, which shortens warranty handling and makes the reorder a one-line message.

• One part number across depots simplifies QC and claims.
• Forecast holds keep the reorder moving before the shelf dips.