AC-0N38T Air Cooler Single Cooling for evaporative cooling systems

Specifications

Will it fit my vehicle?

How to identify the correct unit: locate the reference number stamped on your original component or in the vehicle parts catalogue, then cross-check it against the number below before ordering. Trim and market variants exist for many applications, so the short check is worth the minute before checkout.

How to identify & confirm fitment in 4 steps

1. Locate the OE / reference number on your old part or in the vehicle parts catalogue.
2. Match it to AC-0N38T shown on this page.
3. Send your VIN and engine code plate so our team runs an exact-fit check.
4. Receive fitment confirmation before we dispatch your order.

Cross-reference coverage for air cooler fitment is listed above; confirm your VIN before ordering.

Overview & context

A direct-fit compatible replacement referenced by AC-0N38T for the applications listed in the fitment block.

Key features

Buyers searching evaporative air cooler and portable air cooler look for the strengths listed here: direct fit, verified reference and wholesale packing.

Application & fitment

The fitment block above lists the markets and model families this reference is stocked for, so buyers can match demand without re-checking every listing.

Technical notes

Field note. Most faults on a single-cooling evaporative unit are water-side before they are electrical. Weak cooling with strong airflow usually means the pad is dry or scaled: check pump operation, water level, and the distribution spreader over the 5090 pad, since mineral crust blocks wetting and passes hot air through. Low airflow itself points to a clogged dust filter or dust-loaded pad rather than the motor. Pump dry-run protection is documented on this class, so a unit that shuts down on low water is behaving correctly. A humming pump with no water movement indicates a jammed or scaled impeller, and persistent bearing rumble from the fan side means bearing service.

Deep dive. Installation decisions determine whether the machine cools or just stirs humid air. Mount it at an air intake point drawing fresh outside air, and keep an exhaust path open, since documented practice relies on positive pressure pushing hot air out through open doors, windows, or exhaust fans; a sealed room fills with humidity and cooling collapses. Provide a water supply line and an overflow/drain route, and connect the rated supply: smaller models accept 220V while the 3 kW and larger class runs on 380V three phase 50 Hz. Floor-standing units need a level base; wall or roof discharge orientations must match the documented top, side, or down-discharge variants.

Technical background. Maintenance rhythm is built around water hygiene. Drain and flush the tank on a scheduled cycle, clean the dust filter weekly in dusty plants, and inspect the 5090 pad for scaling or algae; documented controllers include automatic post-shutdown pad drying and 1-99 hour self-cleaning cycles precisely to prevent mold, so enable them. Replace pads when crust resists cleaning or airflow drops. In winter or shutdown, drain the entire water circuit to prevent freeze or bacterial growth. Electrically, check pump and fan current draw annually and keep the motor's IP55 rating intact with undamaged seals.

Technical background. Against compressor air conditioning, the documented arithmetic is stark: a 50 kW cooling duty that a chiller-based system serves at 15-18 kW electrical input is delivered by a 9 kW evaporative unit in one documented comparison, and class-level guidance puts running cost near 10 percent of conventional AC. Against a plain industrial fan, the cooler actually lowers air temperature by 4-10 degrees C rather than just moving it. The trade-offs are equally documented: it adds humidity, needs a water line and drains, and its advantage shrinks in humid coastal climates where condensation cooling loses efficiency.

Technical background. Standards context documented for this category includes CE-marked product lines, HS tariff classification 847960000 for air-conditioning and ventilation machinery, and IP55 F-class insulated motors on reputable builds. Sizing guidance documented by manufacturers calls for 20-35 air changes per hour for industrial cooling, which gives buyers a verifiable basis for model selection rather than marketing claims. Duty scope matters: single-cooling units are ventilation and spot-cooling equipment, not sealed refrigerant systems, so no F-gas handling certification applies, while water quality and legionella management fall under facility hygiene obligations.

Field note. The documented buyer map covers poultry and swine barn owners cooling livestock zones, textile and garment plant managers who benefit from added humidity, injection molding and die-casting shops fighting machine heat, and operators of gyms, canteens, and warehouse loading bays in hot dry regions. One documented sub-pattern is spot cooling: a 20,000 m3/h unit ducted to serve 4-8 workstations. Compared with the fan products in this catalog, the buyer here is solving a temperature problem, not an air-movement problem, and typically purchases in fleet quantities per building.

Technical background. Evaporative coolers wear through water-contact parts long before the fan itself. The service sequence is cellulose or honeycomb cooling pads, circulation pump, float valve, and drain fitting; pads clog with mineral scale and airborne dust, pumps seize when run dry, and float valves leak after a season of hard water. Combine replacements: when pads come out, flush the tank, descale the distribution trough, and test pump flow at the same time. The axial fan motor and its capacitor last years longer if the water system is kept honest. Keep spare pads cut to the exact frame size; trimming on site usually leaves bypass gaps that leak air.

Deep dive. Cabinet integrity and pad condition decide how well these units travel. The plastic or coated steel housing cracks under point loads, so transport with pallet support under the base, not under the tank lip, and keep the discharge louver face clear of strapping. Pads must travel dry and flat; a wet pad crushed in transit sets permanently and channels air unevenly afterward. Drain the tank completely before any move or cold-season storage, because trapped water cracks reservoirs in frost and grows biofilm in warm warehouses. Store upright in a dry space, and tape over the pad frames so construction dust cannot load them while boxed.

Technical background. Setup needs plumbing as much as tools. Stage a spirit level, because evaporative performance depends on the distribution trough dumping water evenly across the pad face; an unlevel cabinet starves the top rows. Have hose fittings rated for continuous supply pressure, a drain line to a lawful discharge point, and a shut-off valve within reach for winterizing. Electrically, confirm the supply matches the nameplate, since this class spans 220V portable and 380V fixed-wired versions, and fixed units belong to a licensed electrician. Prepare spare fuses, sealant for duct or window collar connections, and a water-quality test if the site supply is known to be mineral-heavy.

Application context. Season and climate govern whether this technology belongs in the workshop at all. Evaporative cooling works by adding moisture to air, so in humid months the temperature drop shrinks even as water use rises; in a monsoon-season shop, run the unit primarily as a ventilation and dust-washing air mover and judge it on that basis. Dry, hot seasons are where it shines, with doors or windows left open for the required through-flow. Dusty plants load pads fast, raising static pressure and cutting airflow; set a pad-inspection interval by visible airflow loss, not the calendar. Before freezing weather, drain every low point, then run the pump dry for a minute to clear the lines.

Field note. Bulk procurement should treat pads, pumps, and cabinets as separately inspected commodities. For each shipment, request batch records for the pad media – density, wetting behavior, and glue joint integrity – plus pump flow-rate test sheets and tank leak-test results, with sample-based acceptance agreed before the order. Nameplate audits matter more here than for fans, because airflow figures in catalogues are sometimes quoted for bare fans without pad resistance; insist on the assembled-unit airflow at rated voltage. Verify voltage variant against the packing list on every pallet, since 220V and 380V versions of the same cabinet share appearances. Batch codes on pads allow mid-season warranty swaps without re-measuring.

Application context. Configuration traps center on water and electrical interfaces. Catalogue coverage figures assume open-door airflow; ducting a portable unit into a sealed office reverses the pressure balance and the cooling effect collapses, so either keep the relief path or buy a ducted model designed for it. Confirm discharge orientation – top, side, or down-flow – against the mounting location before ordering brackets and collars. The voltage split between 220V portable and 380V fixed-wired cabinets is invisible from the outside; wiring a fixed cabinet to a light circuit trips breakers and voids protection. Finally, hard water regions need a bleed-off or treatment plan, or scale will close the pads within a single hot season.

Workshop note. Measured performance documented for the class includes evaporative efficiency around 85 percent, air temperature drops of 4-10 degrees C depending on ambient humidity, and water consumption of roughly 25-30 L/h for a 30,000 m3/h machine.

Application note. Because cooling comes from water evaporation, performance is strongest in hot, dry climates; the same airflow class is documented in both axial and centrifugal blower versions, the latter for ducted distribution up to 30-150 m.

Application note. Single Cooling means cooling-only operation: the unit cools by evaporating water, with no compressor and no heating cycle, so output air is always cooler and more humid than intake air.

Supply note. Industrial evaporative coolers of this class are documented using the 5090 cellulose honeycomb cooling pad, kept saturated by a pump from an internal tank of roughly 30-70 L.

Workshop note. Documented units in this category deliver 18,000-30,000 m3/h of airflow with 1.1-3 kW fan motors on 220V/380V 50/60 Hz supplies, covering about 80-250 m2.

The engineering notes above compile verified reference, material and application data for aftermarket air cooler and compatible air cooler.

Quality & authority

Inspection runs on an AQL sampling plan: incoming material, in-process checkpoints and a final release check are recorded on the batch sheet.

Warranty & support

12 Months limited warranty against manufacturing defects. Coverage applies to correctly installed units; keep the batch date code so any claim is processed against its inspection record. Evaporative-media, pump and control questions are answered by our team before dispatch.

Shipping & packaging

We ship worldwide to distributors and garages from China, Dongguan. Each Air Cooler is packed in a single-unit export carton. Coolers ship with media panels protected and tanks drained for transit. Tracked air or sea freight is arranged per order volume.

Bulk quantities of air cooler supplier and air cooler bulk order ship in mixed containers from China, Dongguan.

Cross-reference & catalog

Catalog numbering for this Air Cooler: the primary reference is AC-0N38T. When a supplier catalog lists superseded or regional formats, match on the numeric core of the code rather than the prefix, then confirm the physical fit.

Catalog cross-references for air cooler catalog and air cooler guide resolve to AC-0N38T.

Frequently asked questions

Further swamp cooler questions are answered by the trade desk within one business day.

Compliance disclaimer

Vidishi Auto is an independent supplier. This is an aftermarket compatible replacement, not a genuine OEM part. Brand names are trademarks of their respective owners and are used only to identify fitment.

Wholesale & support

Wholesale terms are quoted per market: volume breaks, mixed-SKU containers and private-label options are all handled by the trade desk. Airflow, media-pad and water-system documentation is available on request.

Trade desk replies with quotation, MOQ and lead time in one business day.

Enquiries about wholesale air cooler and air cooler price receive quotations within one business day.

Media & water-system notes

Evaporative coolers are matched to the spot-cooling plan; the configuration scope below is confirmed before dispatch.

Installation and service notes for air cooler replacement, air cooler fan and icybreeze ultimate air cooler are confirmed by our technical team before dispatch.

• Pre-dispatch checks: the OE / reference number is matched against your old part before packing.
• Media-pad size and water-system scope are confirmed with the quotation.

Workshop teams comparing air cooler evaporative air cooler, air cooler cross reference and how to confirm air cooler fitment receive the pre-dispatch checklist with the quotation.

• Speed settings and control options follow the published listing.

Installation and service notes for single cooling, 10000 cfm swamp cooler and factory floor cooler are confirmed by our technical team before dispatch.

• Media panels are protected and tanks drained for transit.

Workshop teams comparing three speed air cooler receive the pre-dispatch checklist with the quotation.

Control & drainage notes

Control and drainage options are matched to the site; the scope below is confirmed before dispatch.

• Configuration checks: the supplied configuration is confirmed against your order before dispatch.

Configuration and service notes for oem air cooler, portable air cooler for rv and portable air cooler fan are confirmed by our technical team before dispatch.

• Speed settings, timer and control options follow the published listing.
• Drainage and water-supply scope are confirmed with the quotation.

Workshop teams comparing air cooler fan portable, what is a air cooler and wholesale single receive the configuration checklist with the quotation.

• Media-pad replacement intervals are supplied with the shipment.

Configuration and service notes for air cooler with pump, industrial air cooler and three speed cooler are confirmed by our technical team before dispatch.