Stroke Construction carjack-58ed20 for 500mm 30T 12MM
500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar — compatible replacement. Auto Parts built to the original equipment drawing. Wholesale supply with 12 months warranty. Confirm the part number carjack-58ed20 before order.
Original price was: $300.20.$229.10Current price is: $229.10.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| position |
|---|
Product Details
Carton-verified Auto Parts · documentation included · ref carjack-58ed20
Stocked Auto Parts · confirm carjack-58ed20 with the desk
Stroke Construction carjack-58ed20 for 500mm 30T 12MM
Auto Parts supplied under the Vidishi Auto brand. Built for wholesale and B2B supply with a 12-month warranty.
Program buyers spec 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar when they need a auto parts that matches the original equipment drawing without modification. OE-grade construction backs the rating. Applications covered: the fitment list on this page. Dispatch runs from China, Dongguan; send carjack-58ed20 with your enquiry and the desk returns stock status, wholesale price and fitment confirmation in one reply.
Service centres forecast demand for industrial construction so the shelf never dips before the reorder lands.
The desk lists industrial construction against the vehicle application and quotes from China, Dongguan.
Export agencies consolidate orders for industrial construction to cut diagnostic time on repeat failures.
Parts desks specify construction truck with the specification sheet packed on top.
The desk lists construction truck against the vehicle application and quotes from China, Dongguan.
Garage groups quote volumes for construction truck so warranty claims stay simple.
The drawing revision behind carjack-58ed20 is recorded on the test sheet packed with each carton.
Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch AD9157A8.
Sample units can ship with the first wholesale order.
Product overview
This auto parts exists for one job: replace the original that has worn, wept, or cut out intermittently, without touching the mounting points. The build keeps tolerance under load. Nothing ships until the unit has passed a leak test and a dimension check against the OE drawing.
This is not a genuine part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.
Rebuilders forecast demand for construction jack so the fitter works to torque values rather than habit.
The desk lists construction jack against the vehicle application and quotes from China, Dongguan.
Trade counters book stock against construction jack because the batch record travels with the carton.
Importers standardise on marine construction because a documented spec shortens receiving-line QC.
The desk lists marine construction against the vehicle application and quotes from China, Dongguan.
Wholesale partners quote volumes for marine construction so the shelf never dips before the reorder lands.
Installers fitting this Auto Parts on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit.
Reference carjack-58ed20 is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch AD9157A8.
Export dunnage keeps the housing from scuffing in transit.
Gallery images show the actual unit from the current production batch, not renders.
Connector orientation matches the original position, so no harness re-pinning is needed.
Batch codes on the housing trace back to the bench test record.
Specifications
| Part number | carjack-58ed20 |
|---|---|
| Type | Auto Parts |
The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.
Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part. Batch AD9157A8.
AD9157A8
carjack-58ed20
1 set · FOB 229.10-300.20
Spec sheet · packing list · warranty card · batch sheet
Any blank field can be checked on a unit within one day.
Values marked on the housing match the table above; measure on receipt to confirm.
If a figure you need is blank, message the desk and we will measure a unit for you.
Tolerances follow the original equipment drawing for a drop-in fit.
Overview
The 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar belongs to our Car Jack range and is stocked for same-day wholesale dispatch. Buyers choose this auto parts for its OE-grade build . Fleet managers value the consistent actuation and the 12-month warranty; repair shops value the direct-fit dimensions that cut bench time; importers value the stable wholesale lead time and the documented specification.
Every figure on this page is stated from the production specification, so what you read is what ships. The Car Jack category is built for professional buyers who need repeatable quality, not a one-off bargain.
Related references: Car Jack category · product detail · warranty policy · shipping policy · our brand
Fleet depots keep records for engine jack to keep the spare list short.
The desk lists engine jack against the vehicle application and quotes from China, Dongguan.
Volume buyers specify engine jack with the specification sheet packed on top.
Workshops standardise on automotive jack so warranty claims stay simple.
The desk lists automotive jack against the vehicle application and quotes from China, Dongguan.
Distributors forecast demand for automotive jack so the fitter works to torque values rather than habit.
Export agencies consolidate orders for construction light to avoid a second bench visit.
The desk lists construction light against the vehicle application and quotes from China, Dongguan.
Service centres specify construction light because a documented spec shortens receiving-line QC.
Fleets running the applications in the fitment table standardise on reference carjack-58ed20 to keep the spare list short.
The carton for reference carjack-58ed20 is drop-tested to the transport standard before the lane is approved. Batch AD9157A8.
Quotes are locked to the specification revision on the sheet.
Technical specification
Each auto parts is inspected against the original equipment drawing before packing. Tight tolerances keep the unit stable through thermal cycling. The electrical rating is validated across the temperature range. Dimensions are per the OE drawing. These figures come from the production specification and are confirmed on the bench, never guessed. Where a value is not confirmed we leave it blank rather than state a number we cannot stand behind.
The auto parts is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.
Before the unit ships we run a function check against the rated specification: actuation or response at the rated electrical condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.
Garage groups hold shelf space for 500mm carjack rating with the specification sheet packed on top.
The desk lists 500mm carjack rating against the vehicle application and quotes from China, Dongguan.
Parts desks keep records for 500mm carjack rating to keep the spare list short.
Trade counters consolidate orders for 500mm carjack specification and confirm the reference at dispatch.
The desk lists 500mm carjack specification against the vehicle application and quotes from China, Dongguan.
Rebuilders standardise on 500mm carjack specification because the batch record travels with the carton.
Sample units for the applications in the fitment table ship with the batch documentation your quality team files.
Reorder signals for carjack-58ed20 are tracked against your last three off-takes to keep the shelf covered. Batch AD9157A8.
Material grade certificates accompany volume shipments.
Fitment
Fitment verification
Confirm the engine code plate and the part number carjack-58ed20 before purchase. This auto parts fits the applications in our fitment list. If your vehicle is not listed, send the VIN or engine code on WhatsApp for a free check.
Match the old part side by side: stamping, connector shape, and mounting points must agree. A wrong revision will not seat and may damage the surrounding circuit.
Typical fitment scenarios for the auto parts: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm carjack-58ed20 against the old stamping.
If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.
Wholesale partners quote volumes for 500mm for carjack because a documented spec shortens receiving-line QC.
The desk lists 500mm for carjack against the vehicle application and quotes from China, Dongguan.
Importers keep records for 500mm for carjack to avoid a second bench visit.
Volume buyers book stock against carjack 500mm to cut diagnostic time on repeat failures.
The desk lists carjack 500mm against the vehicle application and quotes from China, Dongguan.
Fleet depots hold shelf space for carjack 500mm with the specification sheet packed on top.
Distributors quote volumes for 500mm carjack replacement so warranty claims stay simple.
The desk lists 500mm carjack replacement against the vehicle application and quotes from China, Dongguan.
Workshops consolidate orders for 500mm carjack replacement and confirm the reference at dispatch.
Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.
Reference carjack-58ed20 carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch AD9157A8.
The fitment answer always cites a part number, never a photo.
Fitment questions are answered by part number, not by photo, to avoid near-miss orders.
Where two variants share a housing, the desk confirms the correct one before quoting.
Vehicle-side cross-checks use the OE number printed on the unit you remove.
Cross reference
Cross reference
Reference numbers for this auto parts: carjack-58ed20. Cross numbers help you match the old part when the stamping has worn.
We publish only the numbers we have confirmed. Cross numbers we have not checked are left off the page. When in doubt, send a photo of the old part and we will confirm the match before you pay.
Service centres specify 500mm fits carjack because the batch record travels with the carton.
The desk lists 500mm fits carjack against the vehicle application and quotes from China, Dongguan.
Export agencies hold shelf space for 500mm fits carjack because a documented spec shortens receiving-line QC.
Parts desks forecast demand for carjack series 500mm so the shelf never dips before the reorder lands.
The desk lists carjack series 500mm against the vehicle application and quotes from China, Dongguan.
Garage groups book stock against carjack series 500mm to cut diagnostic time on repeat failures.
Reference carjack-58ed20 is printed on the housing and again on the carton label so receiving can match it to the order in seconds.
Applications for this Auto Parts include the applications in the fitment table — confirm the reference carjack-58ed20 against the unit you remove. Batch AD9157A8.
Where two cross numbers exist, both are printed on the quote.
Cross numbers are matched against the OE drawing, never guessed from a photo.
If your cross number is not shown, send it and we will confirm coverage in writing.
Equivalent references are listed for convenience, with the OE number as master.
Key features
- OE-drawing dimensions for direct fit
- OE-grade materials
- Stable electrical rating
- Leak-tested before packing
- 12-month warranty
- Wholesale and B2B supply
Beyond the list, the auto parts is chosen for repeatable quality across a batch. Importers receive the same specification on every carton, which keeps warranty claims low and rebuilds predictable.
Rebuilders specify heavy duty 500mm and confirm the reference at dispatch.
The desk lists heavy duty 500mm against the vehicle application and quotes from China, Dongguan.
Trade counters quote volumes for heavy duty 500mm so warranty claims stay simple.
Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part.
Where the original for the applications in the fitment table is superseded, the desk maps the old reference to carjack-58ed20 before quoting. Batch AD9157A8.
Packaging graphics never promise more than the spec sheet.
Each feature is checked on the bench, not inferred from a catalogue description.
Feature claims are limited to what the production line can verify unit by unit.
Symptoms & engineering
Engineering notes
The 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar is designed around the original equipment geometry so the auto parts seats without modification. Tight tolerances keep the unit stable under thermal cycling. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench. Common failure signs that point to replacement are intermittent operation, loss of pressure, and visible leakage at the seal. Replace on a clean bench and torque to the OE spec. These notes are derived from the production drawing and bench test, not from generic copy. We do not over-state performance: every rating on this page comes from the production specification.
A worn auto parts typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.
Replace the auto parts when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.
We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.
Store the new auto parts in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.
Verified details held on file by our technical desk: Available in 20-ton, 27-ton and 30-ton (T) hydraulic bottle-jack configurations for construction, automotive and industrial lifting.. This construction variant advertises an extended 500 mm stroke; standard bottle jacks have a stroke of about 150 mm with min height 260-270 mm and max height 415-430 mm.. Built-in hydraulic pump allows vertical and horizontal operation; a safety overload relief valve prevents exceeding the rated capacity.. Compact and portable for tight spaces, but must be placed on a stable flat surface and never used as a permanent support..
Importers keep records for 500mm car jack catalog so the fitter works to torque values rather than habit.
The desk lists 500mm car jack catalog against the vehicle application and quotes from China, Dongguan.
Wholesale partners book stock against 500mm car jack catalog to avoid a second bench visit.
Fleet depots standardise on 500mm carjack spec to cut diagnostic time on repeat failures.
The desk lists 500mm carjack spec against the vehicle application and quotes from China, Dongguan.
Volume buyers forecast demand for 500mm carjack spec so the shelf never dips before the reorder lands.
The carton for reference carjack-58ed20 is drop-tested to the transport standard before the lane is approved.
Lead time for carjack-58ed20 is quoted against stock already on the shelf at China, Dongguan. Batch AD9157A8.
Repeat failures usually point to a wiring or heat issue nearby.
Most field failures trace to heat, vibration, or contaminated connectors — fix the root cause too.
Replace the unit and any damaged connector together to stop repeat failures.
Log the failure mode with the desk so the next order matches the corrected spec.
Installation
- Disconnect power and relieve system pressure.
- Remove the old auto parts after noting the part number carjack-58ed20.
- Clean the seat and check for debris or worn seals.
- Fit the new unit by hand, then torque to the original equipment specification.
- Restore power, pressurise slowly, and inspect for leaks.
- Run a functional test before returning the vehicle to service.
Installation difficulty is moderate. If unsure, use a qualified technician. Keep the old part until you confirm the new unit behaves correctly.
Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new auto parts will fail the same way.
Workshops keep records for 500mm carjack dimensions to keep the spare list short.
Trade counters quote volumes for 500mm carjack dimensions to avoid a second bench visit.
Distributors specify 500mm carjack dimensions and confirm the reference at dispatch.
Reorder signals for carjack-58ed20 are tracked against your last three off-takes to keep the shelf covered.
The drawing revision behind carjack-58ed20 is recorded on the test sheet packed with each carton. Batch AD9157A8.
Anti-tamper fasteners are noted on the installation sheet.
Torque values and sequence come from the vehicle service manual, not from habit.
Photograph the original installation before removal; it saves rework later.
Warranty
Every auto parts carries a 12-month warranty from the date of purchase. The warranty covers manufacturing defects, not misuse or incorrect fitment. Keep the order number and part number carjack-58ed20 for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.
For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.
Export agencies hold shelf space for 500mm warranty because the batch record travels with the carton.
The desk lists 500mm warranty against the vehicle application and quotes from China, Dongguan.
Service centres forecast demand for 500mm warranty so the fitter works to torque values rather than habit.
Reference carjack-58ed20 carries the same warranty terms as the rest of the Vidishi Auto wholesale range.
Installers fitting this Auto Parts on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit. Batch AD9157A8.
Wholesale & B2B
We supply 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar in wholesale and B2B quantities with tiered pricing. Minimum order is 1 set. Request a quote on WhatsApp for volume discounts and lead time. OEM and ODM customization is available on request, including private labelling and custom connectors.
Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.
Garage groups consolidate orders for 500mm wholesale to avoid a second bench visit.
The desk lists 500mm wholesale against the vehicle application and quotes from China, Dongguan.
Parts desks standardise on 500mm wholesale to cut diagnostic time on repeat failures.
Trade counters hold shelf space for 500mm bulk supply with the specification sheet packed on top.
The desk lists 500mm bulk supply against the vehicle application and quotes from China, Dongguan.
Rebuilders keep records for 500mm bulk supply to keep the spare list short.
Wholesale partners book stock against 500mm manufacturer china so the fitter works to torque values rather than habit.
The desk lists 500mm manufacturer china against the vehicle application and quotes from China, Dongguan.
Importers standardise on 500mm manufacturer china because the batch record travels with the carton.
Applications for this Auto Parts include the applications in the fitment table — confirm the reference carjack-58ed20 against the unit you remove.
The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing. Batch AD9157A8.
Blanket orders can be called off against a monthly schedule.
MOQ, tier pricing, and lead time are confirmed in writing before the first carton.
Mixed-SKU pallets are accepted for established importers.
Shipping
Orders ship from China, Dongguan. Packaged shipping weight is stated per the carton. We use sea, air, and express options. Track your parcel with the number we provide after dispatch.
For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.
Volume buyers quote volumes for 500mm shipping because a documented spec shortens receiving-line QC.
The desk lists 500mm shipping against the vehicle application and quotes from China, Dongguan.
Fleet depots consolidate orders for 500mm shipping so the shelf never dips before the reorder lands.
Distributors book stock against 500mm air freight to keep the spare list short.
The desk lists 500mm air freight against the vehicle application and quotes from China, Dongguan.
Workshops hold shelf space for 500mm air freight with the specification sheet packed on top.
Service centres forecast demand for 500mm export carton so warranty claims stay simple.
The desk lists 500mm export carton against the vehicle application and quotes from China, Dongguan.
Export agencies consolidate orders for 500mm export carton so the fitter works to torque values rather than habit.
Where the original for the applications in the fitment table is superseded, the desk maps the old reference to carjack-58ed20 before quoting.
Fleets running the applications in the fitment table standardise on reference carjack-58ed20 to keep the spare list short. Batch AD9157A8.
Consolidated shipments share one bill of lading per buyer.
Cartons are drop-tested to the export standard and palletised on request.
Tracking is shared the day the carton leaves the dock.
Brand & reference
This auto parts is supplied under the Vidishi Auto brand. Vidishi Auto is the responsible brand for specification and warranty. We are not affiliated with the original brand owner.
Using a reference brand name helps buyers find the right replacement; it does not imply endorsement by or partnership with that brand.
Parts desks specify vidishi 500mm parts to avoid a second bench visit.
The desk lists vidishi 500mm parts against the vehicle application and quotes from China, Dongguan.
Garage groups quote volumes for vidishi 500mm parts because a documented spec shortens receiving-line QC.
Rebuilders forecast demand for vidishi 500mm wholesale so the shelf never dips before the reorder lands.
The desk lists vidishi 500mm wholesale against the vehicle application and quotes from China, Dongguan.
Trade counters book stock against vidishi 500mm wholesale to keep the spare list short.
Importers standardise on vidishi auto 500mm and confirm the reference at dispatch.
The desk lists vidishi auto 500mm against the vehicle application and quotes from China, Dongguan.
Wholesale partners quote volumes for vidishi auto 500mm so warranty claims stay simple.
Fleet depots keep records for 500mm vidishi supplier because a documented spec shortens receiving-line QC.
The desk lists 500mm vidishi supplier against the vehicle application and quotes from China, Dongguan.
Volume buyers specify 500mm vidishi supplier to avoid a second bench visit.
Lead time for carjack-58ed20 is quoted against stock already on the shelf at China, Dongguan.
Sample units for the applications in the fitment table ship with the batch documentation your quality team files. Batch AD9157A8.
Trade dress is kept neutral for markets with brand restrictions.
The reference brand is cited only for fitment cross-checking, not as the maker.
FAQ
Is carjack-58ed20 an original part?
No. The 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar is a compatible replacement supplied under Vidishi Auto, not a genuine original product. It is built to the original equipment drawing and referenced for fitment.
What is the warranty on this auto parts?
It carries a 12-month warranty against manufacturing defects.
How do I confirm fitment for carjack-58ed20?
Match the part number to your old part and confirm the engine code. Send the VIN on WhatsApp for a free check.
Can I order this auto parts wholesale?
Yes. MOQ is 1 set and tiered pricing applies for bulk orders.
What material is the 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar made from?
It uses OE-grade materials for durability.
Do you provide the connector and seals?
Yes. The unit ships with the connector and sealing items shown in the gallery for a clean fit.
How long is the lead time?
Stock items dispatch same day; custom or large wholesale orders are quoted on WhatsApp with a firm date.
Workshops standardise on 500mm moq price to cut diagnostic time on repeat failures.
The desk lists 500mm moq price against the vehicle application and quotes from China, Dongguan.
Distributors forecast demand for 500mm moq price with the specification sheet packed on top.
The drawing revision behind carjack-58ed20 is recorded on the test sheet packed with each carton.
Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once. Batch AD9157A8.
New questions are folded back into this section as they arrive.
Answers above reflect the production specification, not marketing copy.
Unanswered questions go to the desk and get a reply within one business day.
Data & compliance
How we label data
Every figure on this page is stated from the production specification, or left blank where it is not confirmed. That keeps the published data honest.
This product is a compatible replacement and is not endorsed by the original brand owner.
Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.
Export agencies consolidate orders for 500mm quality test so warranty claims stay simple.
The desk lists 500mm quality test against the vehicle application and quotes from China, Dongguan.
Service centres specify 500mm quality test and confirm the reference at dispatch.
Garage groups hold shelf space for 500mm certification because the batch record travels with the carton.
The desk lists 500mm certification against the vehicle application and quotes from China, Dongguan.
Parts desks keep records for 500mm certification because a documented spec shortens receiving-line QC.
Trade counters consolidate orders for 500mm inspection report so the shelf never dips before the reorder lands.
The desk lists 500mm inspection report against the vehicle application and quotes from China, Dongguan.
Rebuilders standardise on 500mm inspection report to cut diagnostic time on repeat failures.
Wholesale partners quote volumes for 500mm oem standard with the specification sheet packed on top.
The desk lists 500mm oem standard against the vehicle application and quotes from China, Dongguan.
Importers keep records for 500mm oem standard so warranty claims stay simple.
Installers fitting this Auto Parts on the applications in the fitment table get torque and sequence notes from the vehicle manual, packed with the unit.
Reference carjack-58ed20 is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch AD9157A8.
Support
Need help with 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (carjack-58ed20) so repeat orders are fast.
We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and carjack-58ed20 and we will process it on the same line you ordered from.
Volume buyers book stock against 500mm factory direct so the fitter works to torque values rather than habit.
The desk lists 500mm factory direct against the vehicle application and quotes from China, Dongguan.
Fleet depots hold shelf space for 500mm factory direct because the batch record travels with the carton.
Distributors quote volumes for 500mm sea freight to cut diagnostic time on repeat failures.
The desk lists 500mm sea freight against the vehicle application and quotes from China, Dongguan.
Workshops consolidate orders for 500mm sea freight so the shelf never dips before the reorder lands.
The build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.
Units bound for the applications in the fitment table are packed with the specification sheet on top so QC sees the numbers before the part. Batch AD9157A8.
Time-zone cover is published so replies are predictable.
Car Jack fitment & spec match
This auto parts is matched to the application before it ships: 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar. Confirm 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar against your vehicle, and cross-check carjack-58ed20 with the old part so the replacement seats correctly on the first try.
- Part type: Auto Parts.
- Material: the supplied.
- Reference: carjack-58ed20.
- Supplied by the factory, built to the production drawing.
Where the fitment list is long, match by year, model, and engine before ordering; a five-minute check prevents a return and keeps the right part on the shelf.
Service centres specify 500mm fast delivery to keep the spare list short.
Importers keep records for 500mm fast delivery to avoid a second bench visit.
Export agencies hold shelf space for 500mm fast delivery and confirm the reference at dispatch.
Fleets running the applications in the fitment table standardise on reference carjack-58ed20 to keep the spare list short.
The carton for reference carjack-58ed20 is drop-tested to the transport standard before the lane is approved. Batch AD9157A8.
Car Jack install & torque
Set the jack on a flat, rated surface and chalk the wheels; reused fasteners are the usual cause of comeback, so replace them with the the supplied grade called out on the drawing. The factory ships the part to the production tolerance, and carjack-58ed20 is the number to quote for the matching hardware.
Work on a clean bench, protect the mating faces, and keep 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar in view so the next technician reorders the same unit without guessing. 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar before you commit to the order.
Parts desks forecast demand for car jack 500mm range because the batch record travels with the carton.
Fleet depots standardise on car jack 500mm range so the shelf never dips before the reorder lands.
Garage groups book stock against car jack 500mm range so the fitter works to torque values rather than habit.
Sample units for the applications in the fitment table ship with the batch documentation your quality team files.
Reorder signals for carjack-58ed20 are tracked against your last three off-takes to keep the shelf covered. Batch AD9157A8.
Standing customers see demand notes before spot buyers.
Car Jack verification
before load, confirm the saddle is centred and the safety lock engaged. A the supplied part held to tolerance gives the same service life as the original, and carjack-58ed20 is the number to log for warranty and repeat orders.
Document the reading or clearance you set for 500MM Stroke Construction Jack 20 Ton Hydraulic Jack 27 Ton 30T Mono Electric Hydraulic Bottle Jack for 12mm Rebar, keep the record with the job card, and the next rebuild starts from a known-good baseline instead of a guess.
Rebuilders specify heavy duty car jack to avoid a second bench visit.
Workshops consolidate orders for heavy duty car jack and confirm the reference at dispatch.
Trade counters quote volumes for heavy duty car jack to cut diagnostic time on repeat failures.
Where the applications in the fitment table appear on one job, the desk quotes the full wear set so the vehicle leaves once.
Reference carjack-58ed20 carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch AD9157A8.
Field teardown photos inform the next revision of the sheet.
Application notes for this unit type are written from bench records, not brochures.
Reviews