Aluminum Dannage Rack with Tool Box Replacement for Gyatso
Aluminum Dannage Rack with Tool Box GYATSO-DANNAGE-RACK-ALUMINUM for flatbed freight needing upright retention. Supplied under the Vidishi Auto brand with
$480.00
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| Weight | 60.0 kg |
|---|
Product Details
Aluminum Dannage Rack with Tool Box
GYATSO-DANNAGE-RACK-ALUMINUM — flatbed freight needing upright retention
The GYATSO-DANNAGE-RACK-ALUMINUM is a aluminum dannage rack with tool box. A carrier structure with uprights and cross members that retains lumber or dunnage between them and secures it for road use. Send your vehicle details and we will confirm your vehicle and reference number before you commit.
At a glance the facts to check before ordering
The short version an equipment buyer or workshop checks first.
- Part number: GYATSO-DANNAGE-RACK-ALUMINUM
- Brand: Vidishi Auto
- Reference brand: Gyatso
- Component type: Aluminum Dannage Rack with Tool Box
- Application: flatbed freight needing upright retention
- Condition: new, supplied as a Vidishi Auto compatible replacement
Aluminum Dannage Rack with Tool Box GYATSO-DANNAGE-RACK-ALUMINUM
Fitment verification. Before shipping we compare your vehicle model, axle or equipment type and the reference number you are replacing against the vehicle details you supply. A mismatch costs more than a short conversation.
Image set
Every angle of this aluminum dannage rack with tool box, photographed as supplied.
Specification highlights
The numbers that decide whether this aluminum dannage rack with tool box fits the job in front of you.
Where it fits
How this aluminum dannage rack with tool box is matched to a vehicle before an order is placed.
| Intended application | flatbed freight needing upright retention |
| Confirmation basis | model, axle or equipment type and reference number |
| Reference numbers accepted | GYATSO-DANNAGE-RACK-ALUMINUM |
| Fitment risk | a configuration mismatch usually means a return, not a fitting |
What this aluminum dannage rack with tool box does
Why the part is shaped the way it is, and where it sits in the assembly.
A carrier structure with uprights and cross members that retains lumber or dunnage between them and secures it for road use.
Suited to flatbed freight that needs upright restraint rather than a full enclosure. Inspect cross members, stake pockets and welds for the fatigue cracking typical of repeated load cycles.
GYATSO-DANNAGE-RACK-ALUMINUM specifications
Confirmed values first. Parameters we cannot verify are marked as not published rather than guessed.
| Part number | GYATSO-DANNAGE-RACK-ALUMINUM |
| Reference / OE number | GYATSO-DANNAGE-RACK-ALUMINUM |
| Reference brand | Gyatso |
| Brand | Vidishi Auto |
| Product type | Aluminum Dannage Rack with Tool Box |
| Condition | New |
| Fitment basis | model / axle / equipment type and reference number |
| Warranty | 6 months against manufacturing defects |
Cross reference and interchange
The numbers buyers use to confirm they have the right part before ordering.
| GYATSO-DANNAGE-RACK-ALUMINUM | Reference part number (this position) |
| GYATSO-DANNAGE-RACK-ALUMINUM | Internal item code for this assembly |
Built as a service part
What this aluminum dannage rack with tool box gives the person fitting it.
Matched as one unit
A carrier structure with uprights and cross members that retains lumber or dunnage between them and secures it for road use.
Built for flatbed freight needing upright retention
Suited to flatbed freight that needs upright restraint rather than a full enclosure.
Checked before it ships
Inspect cross members, stake pockets and welds for the fatigue cracking typical of repeated load cycles.
Signs of a worn or wrong part
What usually prompts a buyer to look at this position, and what to check first.
- Wrong geometry or worn contact surfacesUpright spacing that is too wide lets the load shift; retention depends on contact along the bunks.
- Loose or corroded fixing pointsInspect cross members, stake pockets and welds for the fatigue cracking typical of repeated load cycles.
- Load outside the rated applicationSuited to flatbed freight that needs upright restraint rather than a full enclosure.
- Mounting face out of squarePosition bunks to support the load at its structural points and strap against movement, not just compression.
Fitting in the right order
Five steps that prevent most returns on this position.
- Confirm the reference numberMatch GYATSO-DANNAGE-RACK-ALUMINUM against the part you are replacing before anything else is ordered.
- Check the mounting faceInspect cross members, stake pockets and welds for the fatigue cracking typical of repeated load cycles.
- Fit and alignPosition bunks to support the load at its structural points and strap against movement, not just compression.
- Torque and re-checkFollow the vehicle or equipment builder torque figure; re-check after the first load.
- Keep the paperworkThe reference number on the label is what a return is settled against.
Before you order
Two things decide whether this part works as intended.
Upright spacing that is too wide lets the load shift; retention depends on contact along the bunks.
Manufacturing defects are covered by a limited warranty; terms are confirmed on the invoice.
Stake extensions and headboard height both change how much retention the rack provides.
Warranty and what it covers
Scope is limited to manufacturing defects; terms are stated on the order invoice.
Manufacturing defects are covered by a limited warranty; terms are confirmed on the invoice.
Packing and dispatch
How the part is prepared and what happens before it ships.
Each unit is checked against the drawing before it leaves the workshop.
| Minimum order | 1 pc |
| Brand | Vidishi Auto |
| Condition | New, compatible replacement |
| Packing | single item, protective packing |
| Documentation | reference number printed on the packing label |
| Dispatch basis | fitment confirmed before the item leaves the workshop |
For fleet and workshop buyers
Three things that usually matter when this part is bought in volume.
Each unit is checked against the drawing before it leaves the workshop.
GYATSO-DANNAGE-RACK-ALUMINUM FAQ
The questions buyers ask most about this position.
Is this a genuine Gyatso part?
No. It is a aluminum dannage rack with tool box compatible replacement supplied under the Vidishi Auto brand, not a genuine Gyatso product.
Which vehicles does it fit?
It is intended for flatbed freight needing upright retention. Fitment is confirmed by matching your vehicle model, axle or equipment type and the reference number you are replacing before the order is placed.
What should I check before fitting it?
Inspect cross members, stake pockets and welds for the fatigue cracking typical of repeated load cycles.
How is it fitted?
Position bunks to support the load at its structural points and strap against movement, not just compression. Each unit is checked against the drawing before it leaves the workshop.
What is covered by warranty?
Manufacturing defects are covered by a limited warranty; terms are confirmed on the invoice. Damage from incorrect fitting or overload is not covered.
Can I order a single unit?
Yes. The minimum order is one piece.
How do I confirm the part number?
Match GYATSO-DANNAGE-RACK-ALUMINUM against the label on the part you are replacing. The number is also printed on the packing label.
What if the reference number does not match?
Send us the number you have and the vehicle details; we will confirm the cross reference before you commit to an order.
Are the images of the part I will receive?
The photographs are of the item supplied, shown for finish and fitment review before an order is placed.
Related pages
Where to check the next thing before ordering.
Technical support and how to order
Tell us the vehicle and we will confirm the part before quoting.
Send your vehicle details and we will confirm your model and reference number before you commit.
This GYATSO-DANNAGE-RACK-ALUMINUM is a Vidishi Auto compatible replacement referencing the Gyatso range. It is not a genuine Gyatso product. Reference numbers are given so fitment can be confirmed; where a number is not published by the original manufacturer it is marked as such rather than estimated. Specifications that cannot be verified are listed as not published.
Common names and matching terms
The same component goes by several names in the trade. These are the ones we see most often, listed so you can line up what you have with what we supply.
- cargo rack hitch is a name 5 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for honda pilot is a name 8 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack tow hitch is a name 6 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack for toyota tacoma is a name 6 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for suv is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for hitch is a name 5 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack roof is a name 5 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack for tacoma is a name 5 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for receiver hitch is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for car is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for trailer hitch is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack trailer hitch is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for jeep is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack truck is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack with ramp is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- trailer rack is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for truck is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack accessories is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for ford explorer is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for subaru outback is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack 4runner is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack with tonneau cover is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack for truck is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack for trucks is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- trailer rack system is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for atv is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack for truck bed is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber rack for camper shell is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo rack with bike rack is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack harbor freight is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack storage is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack for rv bumper is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack ideas is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack for rv is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack for garage is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack garage is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack for subaru crosstrek is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack for jeep wrangler is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack for pickup truck is a widely used name for this aluminum dannage rack with tool box position.
- lumber rack tacoma is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack bag is a widely used name for this aluminum dannage rack with tool box position.
- cargo rack for golf cart is a widely used name for this aluminum dannage rack with tool box position.
- heavy duty lumber rack is a widely used name for this aluminum dannage rack with tool box position.
- headache rack toolbox is a widely used name for this aluminum dannage rack with tool box position.
- heavy duty wall mounted lumber rack is a widely used name for this aluminum dannage rack with tool box position.
- ladder rack toolbox is a widely used name for this aluminum dannage rack with tool box position.
- headache rack toolbox combo is a widely used name for this aluminum dannage rack with tool box position.
- roof rack toolbox is a widely used name for this aluminum dannage rack with tool box position.
- back rack toolbox mount is a widely used name for this aluminum dannage rack with tool box position.
- back rack toolbox combo is a widely used name for this aluminum dannage rack with tool box position.
- cargo racks jeep wrangler is a name 6 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- trailer racks is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo racks for cars is a name 5 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo racks for suv is a name 4 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo racks is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo racks for trucks is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber racks near me is a name 3 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- cargo racks for trailer hitch is a name 2 suppliers use for this position; it refers to the same aluminum dannage rack with tool box.
- lumber racks for pickup trucks is a widely used name for this aluminum dannage rack with tool box position.
Names vary between suppliers and workshops for the same component, so match on the position and the part number rather than the wording.
Reviews