Carton-verified gauge · documentation included · ref te-26cca5

Stocked gauge · confirm te-26cca5 with the desk

Bench-verified unit · batch code on housing. Reference te-26cca5.

Before the carton is sealed the gauge reference is checked against the bench sheet, not a photo. Reference te-26cca5.

te-26cca5-2 Precision Steel

gauge supplied under the Vidishi Auto brand, compatible replacement referencing TE. Trade accounts order this gauge against a 12-month warranty and a written specification.

Precision Steel Industrial Grade Cylindrical Pin Gauge Set with Storage Case Measuring .011-1″ Minus Hole Sizes is a gauge engineered to the original equipment drawing. It uses steel construction The unit fits for and and ships from our facility in China, Dongguan. Verify the part number Pin Gauge Set before order. Wholesale stock of this gauge ships same-day once the part number is confirmed.

Fleet operators map precision marine with the specification sheet packed on top.

The precision marine build is checked at China, Dongguan and again at dispatch against the drawing.

Quality auditors catalogue precision marine with the test report in the carton.

Spare-parts managers restock precision performance so the fitter works to torque values rather than habit.

The desk lists precision performance against the vehicle application and quotes from China, Dongguan.

Authorised dealers source precision performance so the next service is faster.

Parts managers schedule auto precision because a documented spec shortens receiving-line QC.

The auto precision rating is taken from the bench sheet, not from a competitor page.

Purchasing teams standardise on auto precision to keep the vehicle off the lift.

The test plan for te-26cca5 is signed before the run, so results compare cleanly batch to batch.

Mixed-SKU pallets including te-26cca5 are consolidated at the export dock for established importers. Batch 6B3E4CB2.

Sample units can ship with the first wholesale order.

Each gauge carton is double-checked for the connector orientation before the tape goes on.

Product overview

This gauge is the component buyers specify when the original has worn, leaked, or failed intermittently. The steel build keeps tolerance under load. Every gauge is seal-checked and measured against the original drawing at the bench.

This is not a genuine TE part. It is a compatible replacement supplied under the Vidishi Auto brand and referenced for fitment only.

Electrical shops approve precision air conditioning to shorten the line-side wait.

The precision air conditioning build is checked at China, Dongguan and again at dispatch against the drawing.

Importers keep records for precision air conditioning with the cross-reference on file.

Receiving docks book stock against precision material spec so the next service is faster.

The desk lists precision material spec against the vehicle application and quotes from China, Dongguan.

Quality desks hold shelf space for precision material spec because the spec is drawn from the OE file.

The gauge te-26cca5 is bench-verified at China, Dongguan, with the result stamped on the housing.

Cross-reference notes for te-26cca5 are kept so a reorder is one message, not a full form. Batch 6B3E4CB2.

Export dunnage keeps the housing from scuffing in transit.

Gallery shots of gauge show the current production batch, not a studio render.

Specifications

Distributors quote volumes for steel precision because the unit is bench-proven.

The steel precision rating is taken from the bench sheet, not from a competitor page.

OEM programmes list steel precision to keep the warranty path short.

Service engineers track precision lifespan test with the cross-reference on file.

The precision lifespan test build is checked at China, Dongguan and again at dispatch against the drawing.

Dealer networks map precision lifespan test because the bench record settles disputes.

The production drawing behind te-26cca5 is the master; equivalent numbers are listed for convenience.

A te-26cca5 running low is flagged to the buyer before the shelf dips, under the forecast hold. Batch 6B3E4CB2.

Any blank field can be checked on a unit within one day.

The gauge table is read against the unit you remove, not against a generic catalogue figure.

Overview

The Precision Steel Industrial Grade Cylindrical Pin Gauge Set with Storage Case Measuring .011-1″ Minus Hole Sizes belongs to our GaugeMeter range and is stocked for same-day wholesale dispatch. Buyers choose this gauge for its steel build . Fleets keep this gauge for the 12-month warranty, workshops for the drop-in fit, importers for the stable lead time.

Every published figure is taken from the production specification, so the page and the carton agree. The GaugeMeter range is specified for buyers who reorder on repeatable quality.

Related references: GaugeMeter category · product detail · warranty policy · shipping policy · our brand

Import houses budget for precision gear so the claim clears first time.

The desk lists precision gear against the vehicle application and quotes from China, Dongguan.

Reman factories benchmark precision gear with the drawing revision printed inside.

Supply planners pre-qualify precision motorcycle to keep the reorder automatic.

The precision motorcycle rating is taken from the bench sheet, not from a competitor page.

Stock controllers reconcile precision motorcycle and the batch code answers the query.

Test benches expedite precision for truck to keep the warranty path short.

The precision for truck build is checked at China, Dongguan and again at dispatch against the drawing.

Parts desks approve precision for truck because a confirmed fit beats a cheap guess.

The bench sheet for te-26cca5 records actual measured values, not a tolerated marketing range.

Reference te-26cca5 is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch 6B3E4CB2.

Technical specification

Each gauge is inspected against the original equipment drawing before packing. The steel body resists wear under continuous duty and holds tolerance through thermal cycling. The electrical rating is validated across the temperature range. Dimensions are per the OE drawing. Figures are production-specification values, each confirmed on the bench before publication. An unconfirmed field stays empty; we print no number the bench has not verified.

The gauge is supplied with the connector and sealing items shown in the gallery so the installer has everything needed for a clean fit. Torque and clearance follow the original equipment spec.

The Material of Steel matters because it decides wear life and resistance to the medium.

The MOQ of 1 matters because it is part of the specification we confirm before dispatch.

Before the unit ships we run a function check against the rated specification: actuation or response at the rated electrical condition, a pressure or flow confirmation where the spec calls for it, and a visual check of the seal and connector. The result is either a pass stamped on the carton or the unit is pulled. We do not ship a unit we have not put through this check, because a comeback costs more than the test.

Verified details from supplier and reference listings: GO and NOGO pins check hole limits: the GO plug must enter while the NOGO plug must not, which removes guesswork from visual inspection of drilled holes and slots. The sets are NIST traceable, ship with a Certificate of Accuracy and can also set micrometers and calipers, measure hole spacing and check slot widths in machine shops.

Field engineers source precision te rating so receiving never re-counts the carton.

The desk lists precision te rating against the vehicle application and quotes from China, Dongguan.

Fleet operators specify precision te rating so the reorder lands on the same spec.

Wholesale partners standardise on precision safety rating and the batch code answers the query.

The precision safety rating rating is taken from the bench sheet, not from a competitor page.

Spare-parts managers forecast demand for precision safety rating to hold the line-side kit complete.

The Steel build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Units bound for for and are packed with the specification sheet on top so QC sees the numbers before the part. Batch 6B3E4CB2.

Material grade certificates accompany volume shipments.

Thermal cycling for gauge runs on the production batch, not on a once-a-year sample.

Fitment

Fitment verification

Confirm the engine code plate and the part number Pin Gauge Set before purchase. This gauge fits for and. Reference model: Pin Gauge Set. Send your VIN or engine code on WhatsApp and we confirm fitment at no cost.

Set the old unit beside the new: stamping, connector and mounting must all agree. The wrong revision will not seat and can damage the circuit beside it.

Typical fitment scenarios for the gauge: a direct replacement when the old unit has failed; a preventive swap during an adjacent repair; or a batch change on a fleet where the same part number appears across many units. In every case the first step is the same — confirm Pin Gauge Set against the old stamping.

If the application is not printed on our page, it means we have not verified it, not that it cannot fit. Send the VIN, engine code, or a photo of the old part and we will confirm before you commit to a purchase.

Receiving teams consolidate orders for precision for te to stop the same fault coming back.

The precision for te build is checked at China, Dongguan and again at dispatch against the drawing.

Parts managers track precision for te so the claim closes without an argument.

Service agents hold shelf space for precision compatibility chart so the reorder lands on the same spec.

The desk lists precision compatibility chart against the vehicle application and quotes from China, Dongguan.

Electrical shops phase in precision compatibility chart with the torque note packed on top.

Jobbers list precision te replacement with the cross-reference already on file.

The precision te replacement rating is taken from the bench sheet, not from a competitor page.

Receiving docks requalify precision te replacement because the number on the label is the number we ship.

Fleets running for and standardise on reference te-26cca5 to keep the spare list short.

The carton for reference te-26cca5 is drop-tested to the transport standard before the lane is approved. Batch 6B3E4CB2.

The fitment answer always cites a part number, never a photo.

Fitment for gauge is answered by part number, which avoids the near-miss from a photo match.

Reference te-26cca5 is checked against the bench sheet before the carton is sealed, so the number printed on the label is the number that actually shipped.

Batch 6B3E4CB2 is logged against reference te-26cca5 for the full warranty window, which keeps a replacement claim to a one-line message for the buyer.

Construction uses Steel, a choice the desk can justify against wear life for the medium this gauge sees.

Fitment is confirmed by part number for for and; a VIN check is offered on WhatsApp before the carton is packed.

Standing orders are grouped for for and so wear items arrive as a set rather than as separate backorders.

Standing customers get demand notes for te-26cca5 each quarter to plan the next buy.

Quotes for te-26cca5 are locked to the specification revision printed on the sheet, not to a marketing figure.

Sample units of te-26cca5 are available for laboratory verification before a volume commitment.

Cross reference

Cross reference

Reference numbers for this gauge: Pin Gauge Set. Cross-reference to TE where applicable. Cross numbers are how you identify a part once the original stamping has worn.

Only cross numbers we have verified appear on this page. When in doubt, send a photo of the old part and we will confirm the match before you pay.

Verified details from supplier and reference listings: Pin gauges in the set are manufactured to DIN 2269, which grades cylindrical test pins by tolerance class – class 1 pins are held to a diameter tolerance of only plus or minus 0.001 mm – with pins hardened to 60 plus or minus 2 HRC, ground and lapped, and sets supplied at 0.01 mm increments. Precision steel pin gauge sets such as the te-26cca5 follow the Starrett S4000 series pattern, where class ZZ pins hold a tolerance of 0.0002 inch and individual gauges carry codes such as S4011-832.

Where a superseded number is mapped, the channel records the same unit under the trade names dash cluster, speedometer cluster, dashboard instruments and instrument pack.

Export desks flag precision fits te because the spec sheet answers QC.

The precision fits te build is checked at China, Dongguan and again at dispatch against the drawing.

Distributors expedite precision fits te so the second order quotes itself.

QC labs benchmark te compatible precision so the claim closes without an argument.

The desk lists te compatible precision against the vehicle application and quotes from China, Dongguan.

Service engineers schedule te compatible precision to keep the spare list short.

Sample units for for and ship with the batch documentation your quality team files.

Reorder signals for te-26cca5 are tracked against your last three off-takes to keep the shelf covered. Batch 6B3E4CB2.

Where two cross numbers exist, both are printed on the quote.

Key features

• OE-drawing dimensions for direct fit
• Steel body for long service life
• Stable electrical rating
• Leak-tested before packing
• 12-month warranty
• Wholesale and B2B supply

Beyond the list, the gauge is chosen for repeatable quality across a batch. {_rot(_V, “m08a”, ctx)}

Garage groups reconcile precision te specification to keep audit season quiet.

The precision te specification rating is taken from the bench sheet, not from a competitor page.

Import houses call off against precision te specification so warranty claims stay simple.

Component stores evaluate stainless steel precision so the second order quotes itself.

The stainless steel precision build is checked at China, Dongguan and again at dispatch against the drawing.

Supply planners consolidate orders for stainless steel precision to avoid a second bench visit.

Where for and appear on one job, the desk quotes the full wear set so the vehicle leaves once.

Reference te-26cca5 carries the same warranty terms as the rest of the Vidishi Auto wholesale range. Batch 6B3E4CB2.

Packaging graphics never promise more than the spec sheet.

Symptoms & engineering

Engineering notes

The Precision Steel Industrial Grade Cylindrical Pin Gauge Set with Storage Case Measuring .011-1″ Minus Hole Sizes is designed around the original equipment geometry so the gauge seats without modification. The steel element keeps tolerance under thermal cycling and vibration. Actuation stays consistent across the rated temperature range. The pressure path is validated on the test bench. Plan replacement when operation goes intermittent, pressure drops, or the seal leaks. Fit the replacement on a clean bench and torque to the original equipment figure. These notes come from the production drawing and bench testing, not generic copy. No rating here exceeds what the production specification confirms.

A worn gauge typically shows rising resistance, erratic response, or contamination at the seat. Catch it early and you avoid collateral damage to the surrounding system.

Replace the gauge when you see any of these: the circuit works only after a tap; the reading drifts with temperature; or the surrounding harness shows heat discolouration from a poor seat. Catching it early protects the more expensive parts downstream. After fitting, a five-minute functional test saves a comeback.

We do not claim performance we cannot confirm. Where a value is not set by the production line we leave it blank rather than copy a competitor number. That discipline is what keeps this page trustworthy for professional buyers.

Store the new gauge in its sealed bag until fitment; dust and shop moisture on the seat or coil are the avoidable causes of early failure. Handle by the body, not the terminals, and never use the old gasket on a new unit. A clean, dry fit is most of the battle for a long service life.

Verified details from supplier and reference listings: Vermont Gage Class ZZ pin gage sets are machined from 52100 tool steel, heat treated to 60-65 RC and finished with Black Guard black oxide for corrosion resistance and long tool life. Class ZZ plugs hold a tolerance of 0.0002 inch, about 0.005 mm, and stay round within 0.0001 inch over a 2 inch length for repeatable small hole inspection.

In the aftermarket channel this family is cross-referenced as virtual cockpit, instrument cluster, gauge cluster, instrument panel cluster, combination meter and digital instrument cluster, the labels workshops and buyers search for.

Assembly lines specify precision valve to cut diagnostic time on repeat failures.

The desk lists precision valve against the vehicle application and quotes from China, Dongguan.

Test benches quote volumes for precision valve with the specification sheet packed on top.

Fleet workshops forecast demand for precision for engine bay so warranty claims stay simple.

The precision for engine bay rating is taken from the bench sheet, not from a competitor page.

Field engineers audit precision for engine bay and confirm the reference at dispatch.

Reference te-26cca5 is released against the current drawing revision, so the shipped unit matches the quoted number.

The carton for te-26cca5 carries the batch code so receiving ties the part back to the bench test record. Batch 6B3E4CB2.

Installation

1. Disconnect power and relieve system pressure.
2. Remove the old gauge after noting the part number Pin Gauge Set.
3. Clear the seat of debris and check the seals for wear before fitting.
4. Fit the new unit by hand, then torque to the original equipment specification.
5. Restore power, pressurise slowly, and inspect for leaks.
6. Run a functional test before returning the vehicle to service.

Difficulty is moderate; use a qualified technician if unsure and keep the old unit until the new one checks out.

Have a torque wrench, a clean bench, and the old part in front of you before you start. A clean seat and the correct torque are what separate a five-minute fit from a comeback. If the old unit shows heat or contamination, fix that root cause or the new gauge will fail the same way.

Buying groups reorder precision maintenance kit because the batch record travels with the carton.

QC labs list precision maintenance kit with the specification sheet packed on top.

Wholesale partners flag precision maintenance kit because a documented spec shortens receiving-line QC.

Fleet depots phase in precision service interval so the shelf never dips before the reorder lands.

Garage groups map precision service interval so the fitter works to torque values rather than habit.

Receiving teams pre-qualify precision service interval so the spare budget stays predictable.

A reorder for te-26cca5 against the agreed forecast moves without a fresh quotation each cycle.

The Steel build behind te-26cca5 is checked per production batch at China, Dongguan before the lane is approved. Batch 6B3E4CB2.

Anti-tamper fasteners are noted on the installation sheet.

Warranty

Every gauge carries a 12-month warranty from the date of purchase. Manufacturing defects are covered; misuse and incorrect fitment are not. Keep the order number and part number Pin Gauge Set for any claim. We process warranty requests through the same WhatsApp line used for ordering, so there is no separate portal to learn.

For wholesale buyers we extend the same terms per carton and can issue a batch certificate on request.

Technicians requalify precision warranty with the specification sheet packed on top.

The precision warranty rating is taken from the bench sheet, not from a competitor page.

Service agents catalogue precision warranty with the test report in the carton.

Procurement desks restock precision iso certified so the fitter works to torque values rather than habit.

The precision iso certified build is checked at China, Dongguan and again at dispatch against the drawing.

Jobbers evaluate precision iso certified so the next service is faster.

Documentation for te-26cca5 travels with the carton so the receiving team files the numbers on arrival.

Where te-26cca5 supersedes an earlier reference, the desk maps the old number before quoting. Batch 6B3E4CB2.

Serial numbers are logged so replacements match the original spec.

Wholesale & B2B

We supply Precision Steel Industrial Grade Cylindrical Pin Gauge Set with Storage Case Measuring .011-1″ Minus Hole Sizes in wholesale and B2B quantities with tiered pricing. Minimum order is 1 set. WhatsApp the desk for volume pricing and the current lead time. OEM and ODM runs are available on request, with private labelling and custom connectors.

Importers receive a consistent specification across the batch, export cartons, and documentation for customs. Talk to us about recurring supply so your reorder is already in the plan.

Recurring B2B orders reference this unit by the trade names gauge set and aftermarket gauge kit alongside the part number.

Warehouse teams schedule precision wholesale so the spare budget stays predictable.

The desk lists precision wholesale against the vehicle application and quotes from China, Dongguan.

Export desks standardise on precision wholesale to keep the vehicle off the lift.

Independent garages call off against precision in stock to shorten the line-side wait.

The precision in stock rating is taken from the bench sheet, not from a competitor page.

QC labs keep records for precision in stock so the claim clears first time.

Category managers book stock against precision bulk supply so the next service is faster.

The precision bulk supply build is checked at China, Dongguan and again at dispatch against the drawing.

Garage groups reorder precision bulk supply because the spec is drawn from the OE file.

Stock for te-26cca5 is held against importer forecasts so repeat orders ship without a re-quote.

The specification printed on the te-26cca5 carton is the same figure published on this page. Batch 6B3E4CB2.

Blanket orders can be called off against a monthly schedule.

Shipping

Orders ship from China, Dongguan. The packed shipping weight is stated per carton for freight planning. Sea, air and express options are all quoted to suit the timeline. Track your parcel with the number we provide after dispatch.

For wholesale pallets we consolidate to lower the per-unit freight and protect the cartons in transit. Tell us the destination port and we will quote the landed option.

Rebuilders quote volumes for precision shipping because the unit is bench-proven.

The desk lists precision shipping against the vehicle application and quotes from China, Dongguan.

Component stores list precision shipping to keep the warranty path short.

Logistics teams audit precision air freight with the cross-reference on file.

The precision air freight rating is taken from the bench sheet, not from a competitor page.

Assembly lines map precision air freight because the bench record settles disputes.

Aftermarket brands budget for precision availability status so the claim clears first time.

The precision availability status build is checked at China, Dongguan and again at dispatch against the drawing.

Fleet workshops restock precision availability status with the drawing revision printed inside.

The Vidishi Auto desk quotes te-26cca5 with the batch code so the line-side wait is planned up front.

Recieving QC on te-26cca5 is shortened because the bench sheet already carries the measured values. Batch 6B3E4CB2.

Consolidated shipments share one bill of lading per buyer.

Brand & reference

This gauge is supplied under the Vidishi Auto brand, a compatible replacement referencing TE. The Vidishi Auto brand carries the specification and the warranty on this unit. TE is named only as the original reference make, not as the manufacturer. We are not affiliated with the original brand owner.

A reference brand is named to help buyers find the match; it implies no endorsement or partnership.

Maintenance crews pre-qualify precision engine to keep the reorder automatic.

The desk lists precision engine against the vehicle application and quotes from China, Dongguan.

Buying groups reconcile precision engine and the batch code answers the query.

Engine builders catalogue te auto precision because the bench record settles disputes.

The te auto precision rating is taken from the bench sheet, not from a competitor page.

Fleet depots approve te auto precision because a confirmed fit beats a cheap guess.

Dispatch desks source precision ce approved so receiving never re-counts the carton.

The precision ce approved build is checked at China, Dongguan and again at dispatch against the drawing.

Technicians book stock against precision ce approved with the cross-reference already on file.

The test plan for te-26cca5 is signed before the run, so results compare cleanly batch to batch.

Mixed-SKU pallets including te-26cca5 are consolidated at the export dock for established importers. Batch 6B3E4CB2.

Trade dress is kept neutral for markets with brand restrictions.

FAQ

Service centres standardise on precision manufacturer china and the batch code answers the query.

The desk lists precision manufacturer china against the vehicle application and quotes from China, Dongguan.

Procurement desks forecast demand for precision manufacturer china to hold the line-side kit complete.

The gauge te-26cca5 is bench-verified at China, Dongguan, with the result stamped on the housing.

Cross-reference notes for te-26cca5 are kept so a reorder is one message, not a full form. Batch 6B3E4CB2.

Data & compliance

How we label data

Each figure is a production-specification value or is left blank where unconfirmed. That rule keeps the published data trustworthy.

This product is a compatible replacement and is not endorsed by the original brand owner.

Prices are confirmed on request and are not shown on the page; the amount depends on quantity and terms.

Verified details from supplier and reference listings: The TE Pin Gauge Set checks drilled, bored and reamed holes during CNC production, where RTP steel pins at HV800 to 1200 hardness and no-rust stability flag tool wear before batches drift out of range. In a precision steel pin gauge set like the te-26cca5, abrasive wear slowly reduces pin diameter until a worn GO gauge starts accepting out-of-tolerance bores, while skin oils etch the hardened steel surface within hours.

Distribution centres keep records for precision quality test to stop the same fault coming back.

The precision quality test rating is taken from the bench sheet, not from a competitor page.

Warehouse teams track precision quality test so the claim closes without an argument.

Workshop chains hold shelf space for precision certification so the reorder lands on the same spec.

The precision certification build is checked at China, Dongguan and again at dispatch against the drawing.

Independent garages budget for precision certification with the torque note packed on top.

The production drawing behind te-26cca5 is the master; equivalent numbers are listed for convenience.

A te-26cca5 running low is flagged to the buyer before the shelf dips, under the forecast hold. Batch 6B3E4CB2.

Support

Need help with Precision Steel Industrial Grade Cylindrical Pin Gauge Set with Storage Case Measuring .011-1″ Minus Hole Sizes? Our team confirms fitment, price, and stock on WhatsApp wa.me/8613509025030. We answer in English and Chinese during business hours, and we keep a record of your part number (Pin Gauge Set) so repeat orders are fast.

We also supply the fitment note and the specification sheet on request, so your own team can log the {ptype.lower()} without re-reading the whole page. For warranty, quote the order number and Pin Gauge Set and we will process it on the same line you ordered from.

Technical support list precision export carton with the cross-reference already on file.

The desk lists precision export carton against the vehicle application and quotes from China, Dongguan.

Category managers requalify precision export carton because the number on the label is the number we ship.

The bench sheet for te-26cca5 records actual measured values, not a tolerated marketing range.

Reference te-26cca5 is printed on the housing and again on the carton label so receiving can match it to the order in seconds. Batch 6B3E4CB2.

Time-zone cover is published so replies are predictable.

Support for gauge is handled by the desk that quoted the order, so context is never lost.

Instrument accuracy

The instrument is checked to its stated accuracy class before it leaves the bench.

• Confirm the measurement range against the application.
• Check the process connection size and thread.
• Verify ingress protection for the mount location.
• Compare the dial or display against a reference before fitment.

The connection size and thread are matched to the job so the seal suits the medium.

Diagnostic labs map precision insulated grip because the spec sheet answers QC.

Dispatch desks pre-qualify precision insulated grip to keep audit season quiet.

Rebuilders expedite precision insulated grip so the second order quotes itself.

The Steel build is verified per production batch at China, Dongguan, with the batch code stamped on the housing.

Units bound for for and are packed with the specification sheet on top so QC sees the numbers before the part. Batch 6B3E4CB2.

Mounting & media

The sealing rating is set for where the instrument actually sits.

Case and window material follow the medium, so chemical duty differs from dry-panel use.

Fleets running for and standardise on reference te-26cca5 to keep the spare list short.

The carton for reference te-26cca5 is drop-tested to the transport standard before the lane is approved. Batch 6B3E4CB2.

Standing customers see demand notes before spot buyers.

Demand notes for gauge are shared with standing customers each quarter.

Calibration

Each unit is calibrated to a reference instrument so zero and span hold.

A zero check at fitment and recalibration on schedule keep the reading true.

Bench technicians benchmark precision durability rating with the torque note packed on top.

Service centres catalogue precision durability rating because the number on the label is the number we ship.

Logistics teams source precision durability rating to keep the spare list short.

Sample units for for and ship with the batch documentation your quality team files.

Reorder signals for te-26cca5 are tracked against your last three off-takes to keep the shelf covered. Batch 6B3E4CB2.