300L/min 4×4 Tire Inflator Dual Cylinder 12V 150PSI

300L/min dual cylinder tire inflator for 4×4 trucks and off-road vehicles. 12V DC metal air compressor, 150PSI maximum pressure, preset digital display, auto-stop. Compatible replacement, wholesale supply.

$33.00

100% Secure Checkout

Free Shipping Over $1099

Customer Satisfaction

International Shipping

Product Specifications

Product Details

Supply highlights

Supply terms in one place, before you request a quote.

300 L/min
Airflow
150 PSI
Maximum pressure
12V DC
Power supply
2
Cylinders
Metal
Body & cylinder
4 pcs
Minimum order


Fitment verification

Fitment is confirmed against the number on the old unit. Send us the code plate and VIN and we verify it before you pay.

Model 300L-MIN 4×4 (dual-cylinder tyre inflator)
Airflow rating 300 L/min
Maximum pressure 150 PSI / 10.3 bar
Voltage class 12V DC via fused battery clamps
Applications 4×4 / off-road / SUV / pickup / van tyres
Also inflates Bicycle tubes, balls and air mattresses via adapters

How we label data. Confirmed values are read from supplied stock and published supplier data; reference values are published marketplace specifications and are shown for identification only; anything not published is withheld rather than guessed.


What this 300 L/min dual-cylinder 4×4 tire inflator does

Start with the function, then move to the numbers that matter.

Airing down for traction then needing to air back up is the exact job this off-road tire inflator was made for. The 300L/min air compressor uses twin cylinders to deliver a strong, steady column of air, and the all-metal, vibration-damped body is a genuine metal air compressor rather than a plastic toy — the sort of portable 4×4 air compressor that survives being thrown in a recovery kit.

As a 150PSI tire inflator it covers the range 4×4 and light-truck owners actually use, from 15 PSI trail pressures back up to road pressure. It is a 12V tire compressor powered through fused battery clamps, so the full output of this fast inflating air compressor is on tap without the cigarette-lighter fuse that cripples smaller pumps.

In the kit this dual cylinder tire inflator doubles as a general truck tire inflator and heavy duty air pump: a coiled hose, quick-coupler and three adapters let it handle tyres, bike tubes and inflatables. The preset tire inflator with digital display and auto-stop keeps repeat pressures accurate. For wholesalers it is a compact car tire pump line that sells to off-road, fleet and motorsport buyers alike.

If you arrived here looking for “12v portable air compressor”, “best portable tire inflator for trucks”, you are in the right place: 300L-MIN-4X4 is stocked as a replacement 300 L/min dual-cylinder 4×4 tire inflator for 4×4 trucks, off-road SUVs, pickups and vans (12V DC).

Related searches including “portable air compressor for off roading”, “12v heavy duty portable air compressor” all describe the same replacement job, so they are covered by the details below for a 300 L/min dual-cylinder 4×4 tire inflator for 4×4 trucks, off-road SUVs, pickups and vans (12V DC).

Related searches including “heavy duty portable air compressor 12v” all describe the same replacement job, so they are covered by the details below for a 300 L/min dual-cylinder 4×4 tire inflator for 4×4 trucks, off-road SUVs, pickups and vans (12V DC).

300L/min 4x4 tire inflator three-quarter view with handle
Three-quarter view — Three-quarter view showing the twin cylinder heads and folded carry handle.

Common searches for this part

  • portable tire air compressor 12v
  • how to use portable tire inflator
  • portable air compressor for trucks
  • portable air compressor off road
  • portable air compressor price
  • 12v air compressor off road
  • 12v offroad air compressor


Technical specifications

The values a workshop checks. Confirmed items are read from supplied stock.

Model 300L-MIN (dual-cylinder 4×4 tyre inflator)
Airflow 300 L/min
Maximum pressure 150 PSI (10.3 bar / 1034 kPa)
Cylinders Double cylinder, direct drive, cast metal
Power supply 12V DC
Connection Fused battery alligator clamps
Display Preset digital, automatic shut-off
Hose High-pressure coil hose with quick-coupler
Adapters 3 nozzle adapters included
Condition New

Reference / cross-reference numbers are published listings and are shown for identification only; they are not claims of origin or authorization.


Cross references

Published numbers that point to the same part, shown for identification only.

  • 300L-MIN — Also inflates: Bicycle tubes, balls and air mattresses via adapters — match this against your vehicle before ordering.
  • 300 L/min class — Common dual-cylinder 150 PSI 4×4 specification band
  • 2 x 60 mm cylinders — Confirmed on our own stock: Cylinders is Double cylinder, direct drive, cast metal.
  • 400 L/min class — Higher-output 4-cylinder sibling band for the largest tyres
  • 150 PSI / 10.3 bar — Airflow rating: 300 L/min — match this against your vehicle before ordering.


Why buyers choose this unit

Why trade buyers keep this unit on their order list.

  • Twin-cylinder, direct-drive head rated at 300 L/min airflow.
  • All-metal cylinder and body with an anti-vibration rubber base.
  • 150 PSI maximum pressure for 4×4, SUV and light-truck tyres.
  • 12V DC battery-clamp power — no cigarette-socket fuse to blow.
  • Preset digital display with automatic shut-off at target pressure.
  • Coiled high-pressure hose, quick-coupler and three nozzle adapters.
  • Folded steel carry handle and compact footprint for recovery kits.
  • Suits 4×4, off-road, overland, van and fleet applications.


When it fails

What it looks and sounds like when this component is failing.

  • Confirmed on our own stock: Model is 300L-MIN (dual-cylinder 4×4 tyre inflator).
  • Cylinders for this unit: Double cylinder, direct drive, cast metal — check it against the number stamped on your old part.
  • Connection for this unit: Fused battery alligator clamps — check it against the number stamped on your old part.
  • Confirmed on our own stock: Hose is High-pressure coil hose with quick-coupler.
  • Confirmed on our own stock: Condition is New.


Installation notes

Workshop guidance. Confirm the number on the unit before fitting.

  • 1Park safely on level ground, let tyres cool and check the placard pressure.
  • 2Connect to a 12V DC battery only, engine running for high-draw use.
  • 3Clip the red clamp to positive and black to negative, then confirm a fault-free start.
  • 4Set the target on the preset digital display and begin inflation.
  • 5Let auto-stop finish, release the quick-coupler, refit the valve cap and stow.
300L/min 4x4 metal air compressor side view with clamps and hose
Side view — Side profile with the air hose and fused battery clamps.


Warranty & support

Every 300L-MIN 4×4 tyre inflator ships new and is covered by a <b>12-month limited warranty</b> from the date of dispatch. Warranty covers manufacturing defects; it does not cover reversed polarity, over-voltage connection, or normal wear of hoses, seals and clamps. Keep your order number and we handle claims in writing.


Wholesale & bulk supply

Pricing is handled on the store product page; this page is the identification and fitment reference. Minimum order 4 pcs.

We supply the 300L-MIN-4X4 dual-cylinder tyre inflator to 4×4 accessory retailers, tyre shops, recovery-kit builders and fleet workshops. Pricing and stock levels are managed on the store product page; this page is the identification and specification reference. <b>Minimum order is 4 pcs.</b> Carton and pallet loads are available on request.
Bulk enquiry. For container or pallet quantities, confirm the number on WhatsApp with your target volume and we return a written quote. For recurring off-road or fleet demand we can hold stock against a call-off schedule — tell us your monthly volume.
300L/min 4x4 tire inflator with coiled hose, gauge and battery clamps
Kit layout — Kit layout: coiled high-pressure hose, pressure gauge and battery clamps.


Packaging & shipping

Units are foam-wrapped in a printed carton with the hose and adapters secured to prevent transit damage. We ship worldwide by air or sea freight; lead time and Incoterms are confirmed on the written quote. Combine with other Vidishi Auto 4×4 tyre-inflator lines to fill a carton.


Reviews

We do not publish customer reviews on this reference page. Verified purchase reviews are collected on the store product page once an order is placed. We would rather show no rating than a rating we cannot verify.


Frequently asked

The questions buyers and workshops ask before ordering.

Does 300L-MIN-4X4 ship with High-pressure coil hose with quick-coupler?
Airflow: the compressor can deliver 300 litres of air per minute. Higher airflow means faster inflation, so a heavy duty dual cylinder tire inflator refills a large off-road tyre far quicker than a small single-cylinder pump.
Will it run on a 24V vehicle?
No — this 4×4 model is 12V DC only. Never connect a 12V unit to a 24V system. Match the compressor to your vehicle’s electrical system.
Does 300L-MIN-4X4 cover 300L-MIN 4×4 (dual-cylinder tyre inflator)?
Yes. The preset digital display lets you set a target and the pump shuts off automatically when it is reached, which helps prevent over-inflation.
Is it suitable for airing up after off-road driving?
Yes. A 300 L/min dual-cylinder pump is sized for 4×4 and light-truck tyres; run the engine during high-draw use and let the unit cool if doing several tyres.
Does 300L-MIN-4X4 cover 150 PSI / 10.3 bar?
Power supply for this unit: 12V DC — check it against the number stamped on your old part.
Will “portable tire air compressor 12v” match 300L-MIN-4X4?
It depends on the number stamped on your existing unit. Compare it with 300L-MIN-4X4. For 4×4 trucks, off-road SUVs, pickups and vans (12V DC) Where the numbers agree, the mounting, connector and port layout agree. Send a photo of the tag (and your VIN if available) and we confirm the match in writing before you pay.
Will “how to use portable tire inflator” match 300L-MIN-4X4?
Confirmed on our own stock: Display is Preset digital, automatic shut-off.


Related categories

Other parts buyers of this unit often need.

  • 4×4 tyre deflators
  • Tyre repair / plug kits
  • Maximum pressure is recorded as 150 PSI for this reference.
  • Battery-clamp extension leads
  • Off-road recovery bags
  • Airflow for this unit: 300 L/min — check it against the number stamped on your old part.


Support & contact

Confirm the number before you order — we verify every enquiry in writing.

WhatsApp. Send the old part number and, where relevant, the engine code plate. We confirm the match before quoting.

Written RFQ. Email [email protected] with the number and your quantity. We reply with availability, lead time and a written quote.

Customer Reviews

Reviews

Be the first to review “300L/min 4×4 Tire Inflator Dual Cylinder 12V 150PSI”

Your email address will not be published. Required fields are marked *