VDS-LZ22-ELEC-PUNCH LZ-22 Electric Hydraulic Punch for LZ-22
VDS-LZ22-ELEC-PUNCH hydraulic hole punch for Fabrication and installation. Model LZ-22, 12 Months warranty, MOQ 1 set. Supplied under the Vidishi Auto brand.
Original price was: $140.00.$125.00Current price is: $125.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
At a glance
What this hydraulic hole punch is
An 18-tonne portable electric punch with a 50 mm throat depth, five standard dies from 6.5 mm to 20.5 mm and an 1800 W motor, supplied with a carry case.
Part number match
The order reference for this item is VDS-LZ22-ELEC-PUNCH, built to model LZ-22.
Quote that model number on the order and the packing list so the correct
variant reaches the workshop.
Fitment verification
For steel plate, angle steel and structural work where a higher tonnage than a 10 t punch is needed. The 50 mm throat accepts flat bar and light structural sections.
Read the model plate or the part number stamped on the unit
being replaced before ordering.
Specifications
| Output | 18 tonne |
|---|---|
| Throat depth | 50 mm |
| Dies | 6.5 / 9 / 13 / 17 / 20.5 mm |
| Motor power | 1800 W |
| Punch speed | 2-3 s per hole |
| Case | Hard case with dies and hex keys |
| Model number | LZ-22 |
| Product type | Hydraulic Hole Punch |
| Supplied brand | Vidishi Auto |
| Application | Fabrication and installation |
| Material | Steel plus plastic grip |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 set |
| Quality system | CE |
Specification rows describe the item supplied under the Vidishi Auto brand.
Fitment-relevant values must be confirmed against the unit being replaced.
What the workshop gets
Output
18 tonne
Specification row 1 of 6.
Throat depth
50 mm
Specification row 2 of 6.
Dies
6.5 / 9 / 13 / 17 / 20.5 mm
Specification row 3 of 6.
Motor power
1800 W
Specification row 4 of 6.
How it is used in the workshop
- Select the die to the required hole diameter and seat it fully in the punch head.
- Position the workpiece flat with support behind the hole line.
- Square the punch axis to the face and keep fingers clear of the ram.
- Run the punch until it has cleared the material, then release the trigger.
- Release the residual pressure before changing the die.
the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and common mistakes
The higher tonnage is for thicker steel; on thin material it can over-punch the edge.
The 50 mm throat accepts flat bar and light structural sections.
This page lists what the documentation states; it does not extend any rating beyond it.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page before first use.
- Confirm the model number LZ-22 on the packing list matches the item received.
- Check the 6 specification rows that apply to your application before operating it.
- Follow the site or workshop safety procedure before first operation.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Check the ram returns under spring pressure and that the trigger cuts power before the first hole. This punch is rated 18 tonne and takes Hard case with dies and hex keys.
Bleed residual pressure before changing a die; a die changed under pressure can eject from the head.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this hydraulic hole punch is used
For steel plate, angle steel and structural work where a higher tonnage than a 10 t punch is needed. The 50 mm throat accepts flat bar and light structural sections.
- Steel plate punching
- Angle steel work
- Electrical installation
- Site fabrication
Fitment verification: For steel plate, angle steel and structural work where a higher tonnage than a 10 t punch is needed. The 50 mm throat accepts flat bar and light structural sections.
The application list is a guide. Confirm the model number on the
unit and the part number being replaced before ordering.
Quality and inspection
CE
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The hydraulic hole punch is built to model LZ-22 and packed against that model number.
Specification count
6 specification rows are published on this page for the hydraulic hole punch, from output to case.
Anything the documentation does not state is not claimed for this item.
Wholesale and B2B supply
18-tonne electric hydraulic punches with 50 mm throat and five dies, for steel fabricators and electrical installation contractors.
- Minimum order: 1 set
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total.
Pricing is quoted per order. This page carries no public price.
Choosing between options
| 10 t punch | suits channel, trunking and light plate |
|---|---|
| 18 t punch | for thicker material where the lower tonnage would stall |
| Hydraulic ram and die | most control, least suited to repeat site work |
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
6 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frequently asked questions
Is the LZ-22 a genuine original equipment product?
No. It is supplied under the Vidishi Auto brand as a workshop tool built to the published specification on this page. Where a reference part number appears, it identifies the equipment being replaced, not an original-equipment product.
What does model LZ-22 cover?
An 18-tonne portable electric punch with a 50 mm throat depth, five standard dies from 6.5 mm to 20.5 mm and an 1800 W motor, supplied with a carry case. The published specification rows cover Steel plus plastic grip, and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. For steel plate, angle steel and structural work where a higher tonnage than a 10 t punch is needed. The 50 mm throat accepts flat bar and light structural sections.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 set, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. The 6 published frames were photographed from this item, and the image list is published with the packing documentation.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Quote the VDS-LZ22-ELEC-PUNCH hydraulic hole punch
Model LZ-22, MOQ 1 set, 12 Months warranty.
Wholesale, container and consolidated pricing on request.
How data on this page is labelled
Published
Values in the specification table are stated for this item and apply to the
batch supplied under the Vidishi Auto brand.
Confirm before order
Fitment, duty and pressure values must be confirmed against the equipment the
item will work on. Model numbers and stamped part numbers are the deciding
reference.
Not published
Packaged shipping weight and carton dimensions are not published for this item.
Request them with the order and they are supplied with the quotation.
Service and ordering information
Where to go next
Order checklist
- Model number: LZ-22
- Reference part number: VDS-LZ22-ELEC-PUNCH
- Minimum order: 1 set
- Warranty: 12 Months
- Brand: Vidishi Auto
Category
This item sits in the site’s Tools Accessories category, alongside the rest of the
workshop tool range.
Category: Tools Accessories. Model: LZ-22.
Support
Need this tool for a specific machine or vehicle? Send the model number or the
part number stamped on the unit you are replacing, and we return the matched item
with a delivered quotation.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Reviews