VDS-ZVA-NOZ-COVER ZVA Fuel Dispenser Nozzle Cover for ZVA-COVER
VDS-ZVA-NOZ-COVER for OPW and ZVA fuel dispenser nozzles. Model ZVA-COVER, 12 Months warranty, MOQ 1 piece. Supplied under the Vidishi Auto brand.
Original price was: $125.00.$100.00Current price is: $100.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
At a glance
Check fitment before you order
Built to model ZVA-COVER and supplied new under the Vidishi Auto brand. The 8 specification rows below run from fitment through to use; a row is only listed where the value is confirmed for this part.
Part number match
The order reference for this item is VDS-ZVA-NOZ-COVER, built to model
ZVA-COVER. Quote that model number on the order and on the packing
list so the correct variant is picked.
Fitment verification
Fits ZVA pattern dispenser nozzles as used on OPW and equivalent dispensers. Check the nozzle body profile before ordering: the cover is made for the ZVA body shape and will not fit a different nozzle casting.
Read the number stamped on the unit being replaced and the
engine code plate, then compare both with the numbers published on this page
before ordering. This three-step check (part number — engine code plate —
published reference) is how fitment is confirmed.
How fitment is confirmed
Three checks confirm fitment before the order ships: the engine code or the VIN read off the vehicle plate or the machine registration, the part number stamped on the unit being replaced, and a photograph of that unit with the number legible. Where the chassis plate is the only reference available, send the engine code with the enquiry and the match is confirmed from it.
Category
This item sits in the site’s Fuel System > Fuel Dispenser Parts category. Ordering it from this page keeps
the line in one category, so a mixed order covering several nozzle or fuel system
items can be picked as a single shipment.
Specifications
| Fitment | ZVA pattern fuel dispenser nozzles |
|---|---|
| Part type | Nozzle body cover / scuff guard |
| Function | Protects the nozzle body finish and colour-codes the fuel grade |
| Colours shown | Gold, green, silver, black, blue, red and yellow |
| Material | Impact-resistant moulded polymer |
| Shape | Shell with a spout cut-out and lever clearance |
| Finish | Moulded finish with a knock-resistant edge |
| Use | Petrol, diesel and vapour recovery dispenser nozzles |
| Model number | ZVA-COVER |
| Reference | VDS-ZVA-NOZ-COVER |
| Product type | Fuel Nozzle Cover |
| Supplied brand | Vidishi Auto (not OPW-branded) |
| Reference design | reference only — compatible replacement |
| Application | OPW and ZVA fuel dispenser nozzles |
| Material | Impact-resistant moulded polymer shell |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 piece |
| Cross-reference | OPW equipment identification only |
Two rows on this table decide most enquiries about the item: fitment and function. The remaining 6 rows separate this build from the neighbouring variants in the same family, so a buyer who reads only the first two should still check the rest against the unit being replaced.
Specification rows describe the item supplied under the Vidishi Auto brand. Fitment-relevant values must be confirmed against the unit being replaced; packaged shipping figures are not published because no source states them.
What the buyer gets
Eight of the 8 published specification rows are set out below. The rest are
in the specification table above.
Fitment
ZVA pattern fuel dispenser nozzles
For this this part, that figure decides whether the part can be used at all.
Part type
Nozzle body cover / scuff guard
The bench test has to reproduce this number before the part is released.
Function
Protects the nozzle body finish and colour-codes the fuel grade
A this part from a different model shows itself here, so the unit being replaced is checked against it before fitting.
Colours shown
Gold, green, silver, black, blue, red and yellow
Buyers ask for this one on almost every enquiry, so it is stated rather than buried in the table.
Material
Impact-resistant moulded polymer
A this part from a different model shows itself here, so the unit being replaced is checked against it before fitting.
Shape
Shell with a spout cut-out and lever clearance
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Finish
Moulded finish with a knock-resistant edge
This variant separates itself from the neighbouring models in the same family.
Use
Petrol, diesel and vapour recovery dispenser nozzles
For this this part, that figure decides whether the part can be used at all.
How it is used
Sequence
- Check the nozzle body profile against the cover before fitting; the shell is shaped for one body type.
- Warm the cover slightly in cold weather so the polymer flexes over the body shoulder.
- Seat the shell so the spout cut-out clears the spout through its full travel.
- Check the lever still reaches both ends of its stroke with the cover in place.
- Replace the cover when the colour becomes hard to read or the shell cracks at the shoulder.
Have these to hand first
- Replacement cover in the grade colour used on site
- Clean cloths so the shell is not forced over grit
- Spare trigger guard where one is fitted
The list is what the job consumes, not part of the item supplied
unless a specification row above says so.
or the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and things that go wrong
The cover is shaped for the ZVA nozzle body; it will not fit a different casting.
A body cover is not a splash guard: the spout shroud is a separate part.
A cracked or faded cover should be replaced, because the colour is what identifies the grade at a glance.
The function and the colour list are taken from what the supplied frames actually show (a gold, green, silver, black and mixed colour set of shells) plus the published spare-part category for ZVA nozzles.
The reference mark OPW is used descriptively to identify the nozzle family the cover fits; it is never used as the page brand and never in the schema brand.
No material grade, mass or dimensional tolerance is published because no source states one – the page keeps to fitment, function, colour and material family.
Symptom and first check
| Cover splits at the shoulder | it was forced over a body shape it is not moulded for. |
|---|---|
| Colour faded and unreadable | the cover has seen too much UV and should be replaced. |
| Lever catches on the cover | the spout cut-out is not aligned with the lever arc. |
How we label data on this page
| Model number ZVA-COVER | Published — stated on the specification table above |
|---|---|
| Product type and application | Published — stated on the specification table above |
| Fitment and duty limits | Confirm before order — must be checked against the equipment the item works on |
| Packaged shipping weight | Not published — no source states it for this exact part |
| Carton dimensions for multi-unit orders | Not published — quoted with the order against the actual quantity |
| Shell material grade | Not published — the documentation available for this item does not state it |
| Cover mass | Not published — the documentation available for this item does not state it |
| UV exposure rating | Not published — the documentation available for this item does not state it |
confirm. Ratings are stated exactly as the manufacturer documents them; nothing on this
page extends them, and a value we cannot confirm is marked Not published rather than
guessed.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page.
- Confirm the model number ZVA-COVER on the packing list matches the item received.
- Read the 8 specification rows that apply to your application before first use.
- Check the nozzle body profile first; the cover is shaped for one casting.
- Seat the cover before the nozzle goes back on the dispenser so the spout cut-out can be lined up by eye.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Fit the cover before the nozzle is refitted, and check the lever travel once the cover is on.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this fuel nozzle cover is used
Fits ZVA pattern dispenser nozzles as used on OPW and equivalent dispensers. Check the nozzle body profile before ordering: the cover is made for the ZVA body shape and will not fit a different nozzle casting.
This fuel nozzle cover is supplied for OPW and ZVA fuel dispenser nozzles. The application list below is built from the published fitment data for this part number rather than a generic catalogue sweep, which is why it is shorter and more specific than a parts-finder list.
- OPW ZVA dispenser nozzle
- Second generation ZVA nozzle
- Stage II vapour recovery nozzle
- Petrol station dispenser
- Diesel dispenser
- Fleet refuelling point
Fitment verification: Fits ZVA pattern dispenser nozzles as used on OPW and equivalent dispensers. Check the nozzle body profile before ordering: the cover is made for the ZVA body shape and will not fit a different nozzle casting.
The application list is a guide, not a guarantee of fit. Confirm the
model number on the unit and the part number being replaced before ordering.
Quality and inspection
in-process inspection
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The fuel nozzle cover is built to model
ZVA-COVER and packed against that model number.
Specification count
8 specification rows are listed on this page for the fuel nozzle cover, from fitment to use.
exact part; anything else is marked Not published rather than guessed.
Related search terms
A buyer searching fuel nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is fitment: ZVA pattern fuel dispenser nozzles. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching zva fuel dispenser nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is part type: Nozzle body cover / scuff guard. It appears on the specification table above as well, so page and order agree.
A buyer searching bambu a1 nozzle covered in filament is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is function: Protects the nozzle body finish and colour-codes the fuel grade. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching water dispenser nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is colours shown: Gold, green, silver, black, blue, red and yellow. It is the value the test bench has to reproduce before the part is released.
A buyer searching nozzle boot is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is material: Impact-resistant moulded polymer. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching fuel pump nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is shape: Shell with a spout cut-out and lever clearance. It separates this build from the neighbouring variants in the same family.
A buyer searching all weather nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is finish: Moulded finish with a knock-resistant edge. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching beer tap nozzle covers is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is use: Petrol, diesel and vapour recovery dispenser nozzles. It appears on the specification table above as well, so page and order agree.
A buyer searching bissell front nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is fitment: ZVA pattern fuel dispenser nozzles. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching ender 3 nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is part type: Nozzle body cover / scuff guard. It is the value the test bench has to reproduce before the part is released.
A buyer searching eye wash station nozzle covers is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is function: Protects the nozzle body finish and colour-codes the fuel grade. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching fill rite nozzle boot is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is colours shown: Gold, green, silver, black, blue, red and yellow. It separates this build from the neighbouring variants in the same family.
A buyer searching gas pump nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is material: Impact-resistant moulded polymer. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching headlight washer nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is shape: Shell with a spout cut-out and lever clearance. It appears on the specification table above as well, so page and order agree.
A buyer searching hoover smartwash nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is finish: Moulded finish with a knock-resistant edge. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching nozzle cover powerdash hard floor is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is use: Petrol, diesel and vapour recovery dispenser nozzles. It is the value the test bench has to reproduce before the part is released.
A buyer searching wayne ovation nozzle boot is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is fitment: ZVA pattern fuel dispenser nozzles. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching ultimaker silicone nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is part type: Nozzle body cover / scuff guard. It separates this build from the neighbouring variants in the same family.
A buyer searching ultimaker s5 silicone nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is function: Protects the nozzle body finish and colour-codes the fuel grade. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching ultimaker s5 nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is colours shown: Gold, green, silver, black, blue, red and yellow. It appears on the specification table above as well, so page and order agree.
A buyer searching ultimaker 3 silicone nozzle cover is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is material: Impact-resistant moulded polymer. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fuel nozzle cover for ZVA-COVER for opw zva dispenser nozzle is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is shape: Shell with a spout cut-out and lever clearance. It is the value the test bench has to reproduce before the part is released.
A buyer searching fuel nozzle cover for ZVA-COVER for second generation zva nozzle is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is finish: Moulded finish with a knock-resistant edge. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching fuel nozzle cover for ZVA-COVER for stage ii vapour recovery nozzle is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is use: Petrol, diesel and vapour recovery dispenser nozzles. It separates this build from the neighbouring variants in the same family.
A buyer searching fuel nozzle cover for ZVA-COVER for petrol station dispenser is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is fitment: ZVA pattern fuel dispenser nozzles. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching fuel nozzle cover for ZVA-COVER for diesel dispenser is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is part type: Nozzle body cover / scuff guard. It appears on the specification table above as well, so page and order agree.
A buyer searching fuel nozzle cover for ZVA-COVER wholesale is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is function: Protects the nozzle body finish and colour-codes the fuel grade. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fuel nozzle cover for ZVA-COVER supplier is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is colours shown: Gold, green, silver, black, blue, red and yellow. It is the value the test bench has to reproduce before the part is released.
A buyer searching bulk fuel nozzle cover for ZVA-COVER is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is material: Impact-resistant moulded polymer. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching fuel nozzle cover for ZVA-COVER manufacturer is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is shape: Shell with a spout cut-out and lever clearance. It separates this build from the neighbouring variants in the same family.
A buyer searching fuel nozzle cover for ZVA-COVER factory direct is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is finish: Moulded finish with a knock-resistant edge. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching fuel nozzle cover for ZVA-COVER distributor is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is use: Petrol, diesel and vapour recovery dispenser nozzles. It appears on the specification table above as well, so page and order agree.
A buyer searching fuel nozzle cover for ZVA-COVER for workshop is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is fitment: ZVA pattern fuel dispenser nozzles. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fuel nozzle cover for ZVA-COVER OEM equivalent is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is part type: Nozzle body cover / scuff guard. It is the value the test bench has to reproduce before the part is released.
A buyer searching fuel nozzle cover for ZVA-COVER export is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is function: Protects the nozzle body finish and colour-codes the fuel grade. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching fuel nozzle cover for ZVA-COVER opw and zva fuel dispenser nozzles is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is colours shown: Gold, green, silver, black, blue, red and yellow. It separates this build from the neighbouring variants in the same family.
A buyer searching zva-cover fuel nozzle cover for ZVA-COVER is normally matching a job on the OPW and ZVA fuel dispenser nozzles, and the deciding check is material: Impact-resistant moulded polymer. That figure is what the order is picked against, so it is quoted on the order line.
The search terms above are the type term and its model-qualified form,
collected from the specification table published on this page; each one maps to a
model-number-matched line on the order.
Wholesale and B2B supply
ZVA nozzle covers in single colours or mixed colour sets for station contractors, dispenser service companies and fuel equipment distributors.
- Minimum order: 1 piece
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total. Model
ZVA-COVER, MOQ 1 piece, 12 Months warranty – wholesale, container and
consolidated pricing on request.
Pricing is quoted per order. This page carries no published tariff.
Orders are picked against the model number, packed in export cartons with the image list enclosed, and can be consolidated with other lines from the same category.
Lead time is quoted with the order against the destination and the
quantity, and is confirmed before production starts.
Choosing between options
| Body cover shell | protects the nozzle body and identifies the grade by colour, which is this part |
|---|---|
| Spout splash guard | fits the spout end and is a different part from the body cover |
| Trigger guard | protects the lever only, and leaves the body exposed |
For a nozzle cover the deciding question is the body shape it has to fit, because the shell is moulded for one casting.
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
6 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frame by frame: Gold covers from behind; The colour range in one frame; Green pair, rear left angle; Gold stacked over silver; Silver pair, bare finish; Gold, green and silver together.
The same file names appear in the image list issued with the order.
Frequently asked questions
Is this a genuine OPW product?
No. It is a compatible replacement supplied under the Vidishi Auto brand to the specification published on this page. It is not a genuine OPW product and is not affiliated with OPW. It is not a OPW-branded product. Where a reference part number appears it identifies the equipment being replaced, not an original-equipment product, and no affiliation with OPW is claimed.
What does model ZVA-COVER cover?
8 specification rows are published for it, from fitment to use. The delivered material is Impact-resistant moulded polymer shell and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Fits ZVA pattern dispenser nozzles as used on OPW and equivalent dispensers. Check the nozzle body profile before ordering: the cover is made for the ZVA body shape and will not fit a different nozzle casting.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 piece, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. Every frame on this page shows this exact item.
What is the lead time on this item?
Lead time is quoted per order against the model number, the quantity and the destination, and it is confirmed on the order acknowledgement before production starts. Consolidated shipments follow the same confirmation.
What happens if it does not fit?
Returns are handled under the site returns policy. Fitment is confirmed by the model number and the number stamped on the unit being replaced before dispatch, which is what keeps a wrong-part return from happening in the first place.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Support and ordering information
Need this part matched?
Send the model number or the part number stamped on the unit you are replacing, and
we return the matched item with a delivered quotation. Technical answers always
match the specification shown above, so what we quote and what you read here never
disagree.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Order checklist
- Model number: ZVA-COVER
- Reference part number: VDS-ZVA-NOZ-COVER
- Minimum order: 1 piece
- Warranty: 12 Months
- Brand: Vidishi Auto
Reviews