37140-0K030 Propeller Drive Shaft Replacement for Toyota Hilux KUN26
37140-0K030 Propeller Drive Shaft For Toyota Hilux KUN26 – front propeller shaft assembly. Match part number 37140-0K030 before ordering; wholesale supply.
$40.10
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
Front propeller (drive) shaft assembly, Toyota part number 37140-0K030, 371400K030 — a steel propshaft that transmits torque from the transfer case to the front differential on part-time 4WD Toyota Hilux (Vigo) KUN25/KUN26, GGN25/GGN26, TGN26, GUN125/126 and Fortuner GGN50/KUN50/51
Covered models include Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51.
Catalogues list an application range of 2005-2015 (Hilux VII, KUN-GGN generation); extended to 2005-2021 including Hilux VIII GUN125/126 by some catalogs.
It is supplied as a compatible replacement for Toyota references, not as a genuine Toyota-branded part.
This unit is frequently shortlisted by parts departments researching drive shaft and propeller shaft.
This unit is frequently shortlisted by parts departments researching drive shaft spiders.
This unit is frequently shortlisted by parts departments researching drive shafts.
This unit is frequently shortlisted by parts departments researching drive shaft king.
This unit is frequently shortlisted by parts departments researching drive shaft slip yoke.
The notes above summarise what buyers typically need to know about drive shaft balancing before ordering.
Catalogue descriptions that mention drive shaft obojima 5e normally refer to the same driveline family documented here.
Our sales desk answers drive shaft replacement cost questions daily and quotes by WhatsApp with lead time and freight included.
| Product type | Drive Shaft |
| Part number | 37140-0K030 | 371400K030 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 5 pieces |
| Models | Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51 |
| Application range | 2005-2015 (Hilux VII, KUN-GGN generation); extended to 2005-2021 including Hilux VIII GUN125/126 by some catalogs |
| Engine code | 2KD-FTV (2.5 D-4D), 1KD-FTV (3.0 D-4D), 2TR-FE (2.7 petrol), 1GR-FE (4.0 V6 petrol), 1GD-FTV (2.8 D-4D), 2GD-FTV (2.4 D-4D) |
| Published specification | Length 597 mm; flange bolt-hole-circle diameter 93 mm (both ends); tube outer diameter 46 mm (both ends) — per KAMOKA 5020040 (OEM ref 37140-0K030) on AUTODOC |
| Country of origin | China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Toyota-branded, not a genuine Toyota part. Reference design: Toyota (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Match the number stamped on your old shaft and compare the photo with the original part before ordering.
Reference and OE numbers
- 37140-0K030
- 371400K030
Cross references
- 371400K030
- 37140 0K030
- 37140-0K030
- GSP PS900479
- NTY NWN-TY-010
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is 37140-0K030.
- Numbers are often written in grouped form on the part or label, for example 371400K030.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Drive Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Published specification | Length 597 mm; flange bolt-hole-circle diameter 93 mm (both ends); tube outer diameter 46 mm (both ends) — per KAMOKA 5020040 (OEM ref 37140-0K030) on AUTODOC | Reference |
| Application range | 2005-2015 (Hilux VII, KUN-GGN generation); extended to 2005-2021 including Hilux VIII GUN125/126 by some catalogs | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
The engineering data most readers pair with drive shaft diagram is tabulated in the specification section above.
Product features
- Front propeller (drive) shaft assembly, Toyota part number 37140-0K030, 371400K030 — a steel propshaft that transmits torque from the transfer case to the front differential on pa
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Built as a compatible replacement for Toyota references, supplied as an independent part and not as a Toyota-branded product.
- Wholesale packing with a minimum order of 5 pieces.
- Each unit is checked against the numbers listed above before dispatch.
Catalogue descriptions that mention hilux drive shaft normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft yoke normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft in spanish normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft shops normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching drive shaft band.
This unit is frequently shortlisted by parts departments researching drive shaft for bush hog.
Catalogue descriptions that mention drive shaft balance normally refer to the same driveline family documented here.
A careful drive shaft repair job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
The drive shaft support bearing replacement sequence in the installation notes mirrors standard workshop practice for this driveline class.
Inspect the neighbouring drive shaft u joint hardware for wear while the assembly is on the bench.
Inspect the neighbouring drive shaft and u joint hardware for wear while the assembly is on the bench.
Inspect the neighbouring drive shaft center support bearing hardware for wear while the assembly is on the bench.
Inspect the neighbouring drive shaft bolts hardware for wear while the assembly is on the bench.
Renewing the hardware around drive shaft seal at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around drive shaft joint at the same time as the main assembly avoids a second teardown later.
What is included
Reference 37140-0K030 suits Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51. Order 37140-0K030 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Clunk, bang when shifting into gear or changing direction of power flow — classic worn universal joint play (Dana/Spicer axle service diagnostic table)
- Driveline vibration that increases with road speed and under acceleration — caused by worn U-joints, a damaged shaft, or a missing balance weight
- Rhythmic squeak or chirp that tracks driveshaft speed — dry, unlubricated U-joint, early warning sign
- Rust-coloured dust around the U-joint bearing caps — water ingress and failing needle bearings
- On Hilux IFS front propshafts the wide-angle double Cardan joint and the slip spline are the highest-wear points; wear produces vibration plus a hard clunk that is often misdiagnosed as a front differential fault
- Grease washout, hardened seals after wading or off-road use accelerates joint and spline wear
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Installation notes
These steps apply to drive shaft reference 37140-0K030, listed for Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51.
- Confirm reference 37140-0K030 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around 37140-0K030.
- Fit 37140-0K030 in the original orientation and tighten fixings to the vehicle manufacturer values.
- Support the shaft so the joints are not left hanging while it is unbolted.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference 37140-0K030 is the drive shaft for Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51. Support the shaft so the joints are not left hanging while it is unbolted.Listed applications include Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51; watch for clunk, bang when shifting into gear or changing direction of power flow — classic worn universal joint play (dana/spicer axle service diagnostic table) for reference 37140-0K030
Work on a drive shaft of this type is normally carried out by a trained technician; reference 37140-0K030 is no exception.
Fitting crews handling drive shaft fix should support the assembly on stands and mark the phasing before disassembly.
A careful drive shaft hanger bearing replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Inspect the neighbouring drive shaft carrier bearing hardware for wear while the assembly is on the bench.
Renewing the hardware around drive shaft bearing at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around drive shaft universal joint at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around drive shaft boot at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around drive shafts and boots at the same time as the main assembly avoids a second teardown later.
Warranty for 37140-0K030
Reference 37140-0K030 (a drive shaft) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for 37140-0K030 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a seized centre bearing or an unbalanced prop shaft is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Toyota; Toyota references identify the application only.
Buyers comparing drive shaft price for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Frequently asked questions
Is this a genuine Toyota part matching reference 37140-0K030?
How do I confirm 37140-0K030 fits my vehicle?
What is the minimum order for 37140-0K030?
How is pricing for 37140-0K030 shown?
What is the warranty period for 37140-0K030?
Are packaged weight and carton size published for 37140-0K030?
Which numbers does 37140-0K030 cover?
What failure signs indicate I need 37140-0K030?
Related parts and pages
Workshops ordering 37140-0K030 Propeller Drive Shaft (37140-0K030) usually check these pages next. Listed applications for reference 37140-0K030 include Hilux (Vigo) KUN25, Hilux (Vigo) KUN26, Hilux GGN25, Hilux GGN26, Hilux TGN26, Hilux GUN125, Hilux GUN126, Fortuner GGN50/KUN50/KUN51; common wear shows as clunk, bang when shifting into gear or changing direction of power flow — classic worn universal joint play (dana/spicer axle service diagnostic table).
Support and ordering for 37140-0K030
Send reference 37140-0K030, quantity and destination and we will reply with availability, lead time and a delivered quotation for 37140-0K030 Propeller Drive Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for 37140-0K030 are published on the site policy pages.
The notes above summarise what buyers typically need to know about drive shaft propeller before ordering.
Catalogue descriptions that mention drive shaft driveshaft normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about drive shaft español before ordering.
The notes above summarise what buyers typically need to know about drive shaft parts before ordering.
Catalogue descriptions that mention drive shaft automotive normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft faults normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about drive shaft assembly before ordering.
Reviews