MR580389 Propeller Drive Shaft Replacement for Mitsubishi Pajero
MR580389 Propeller Drive Shaft For Mitsubishi Pajero / Montero – V73 / V75 / V77 / V78 / V87 / V88 / V93 / V98. Match part number MR580389 before ordering;.
$64.10
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
Front propeller (drive) shaft assembly, Mitsubishi part number MR580389 (cross-referenced MR453516, MR410559) — a steel propshaft for the Mitsubishi Pajero, Montero and Shogun, catalogued at 882 mm length, front axle position
It is produced for Mitsubishi applications.
Covered models include Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W).
Catalogues list an application range of Pajero III 2000-2006/2007 (primary application); also catalogued for Pajero IV from 10/2006 onward.
It is supplied as a compatible replacement for Mitsubishi references, not as a genuine Mitsubishi-branded part.
The notes above summarise what buyers typically need to know about drive shaft propeller shaft before ordering.
The notes above summarise what buyers typically need to know about pajero drive shaft before ordering.
This unit is frequently shortlisted by parts departments researching drive shaft issues.
The notes above summarise what buyers typically need to know about drive shaft phasing before ordering.
The notes above summarise what buyers typically need to know about drive shaft break before ordering.
Catalogue descriptions that mention drive shaft in car normally refer to the same driveline family documented here.
Our sales desk answers drive shaft repair cost questions daily and quotes by WhatsApp with lead time and freight included.
| Product type | Drive Shaft |
| Part number | MR580389 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 10 pieces |
| Make | Mitsubishi |
| Models | Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W) |
| Application range | Pajero III 2000-2006/2007 (primary application); also catalogued for Pajero IV from 10/2006 onward |
| Engine code | 3.2 DI-D diesel, 3.5 V6 GDI petrol, 2.5 TDi diesel, 3.0 V6 petrol |
| Published specification | Length 882 mm; front propshaft; approx. 6 kg (NTY NWN-MS-004 packaging data) |
| Country of origin | China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Mitsubishi-branded, not a genuine Mitsubishi part. Reference design: Mitsubishi (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Before checkout, read the part number stamped on the old unit and check the photo against your original.
Reference and OE numbers
- MR580389
Cross references
- MR453516
- MR410559
- MR580389
- NTY NWN-MS-004
- MERTZ M-D1059
- AMCP-31580-MS004
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is MR580389.
- Numbers are often written in grouped form on the part or label, for example MR580389.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Drive Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Published specification | Length 882 mm; front propshaft; approx. 6 kg (NTY NWN-MS-004 packaging data) | Reference |
| Application range | Pajero III 2000-2006/2007 (primary application); also catalogued for Pajero IV from 10/2006 onward | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
Reference notes for drive shaft inspection stay within the measured, source-labelled values published on this page.
If drive shaft problems appears after a load change, the phasing and balance of the driveline should be re-verified on a lift.
Product features
- Front propeller (drive) shaft assembly, Mitsubishi part number MR580389 (cross-referenced MR453516, MR410559) — a steel propshaft for the Mitsubishi Pajero, Montero and Shogun, cat
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Built as a compatible replacement for Mitsubishi references, supplied as an independent part and not as a Mitsubishi-branded product.
- Wholesale packing with a minimum order of 10 pieces.
- Each unit is checked against the numbers listed above before dispatch.
This unit is frequently shortlisted by parts departments researching front propeller drive shaft.
Catalogue descriptions that mention drive shaft coupling normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching drive shaft on a car.
This unit is frequently shortlisted by parts departments researching drive shaft bike.
The notes above summarise what buyers typically need to know about drive shaft flange yoke before ordering.
A careful drive shaft center support bearing replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful drive shaft carrier bearing replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful drive shaft bearing replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Fitting crews handling drive shaft seal replacement should support the assembly on stands and mark the phasing before disassembly.
Inspect the neighbouring drive shaft and u joints hardware for wear while the assembly is on the bench.
Inspect the neighbouring drive shaft cv joint hardware for wear while the assembly is on the bench.
Renewing the hardware around drive shaft support bearing at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring drive shaft and cv joint hardware for wear while the assembly is on the bench.
For drive shaft parts diagram, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
What is included
Reference MR580389 suits Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W). Order MR580389 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Clunk, bang when engaging drive or reverse, or when changing direction of power flow — worn universal joint play
- Driveline vibration that worsens with speed or under load — worn U-joint, damaged shaft or lost balance weight
- Cyclical squeak or chirp tied to shaft speed — dry U-joint that has lost grease
- Rust-coloured dust around bearing caps, grease leakage at seals — water and dirt ingress, joint at end of life
- Excessive radial play at the yoke when checked by hand on a lift — U-joint past service limit; if ignored, complete joint failure can let the propshaft detach
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Technicians documenting drive shaft leaking recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Workshop experience links drive shaft noise to worn universal joints or a tired centre bearing, so the assembly is normally inspected end to end.
Installation notes
These steps apply to drive shaft reference MR580389, listed for Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W).
- Confirm reference MR580389 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around MR580389.
- Fit MR580389 in the original orientation and tighten fixings to the vehicle manufacturer values.
- Support the shaft so the joints are not left hanging while it is unbolted.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference MR580389 is the drive shaft for Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W). Support the shaft so the joints are not left hanging while it is unbolted.Listed applications include Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W); watch for clunk, bang when engaging drive or reverse, or when changing direction of power flow — worn universal joint play for reference MR580389
Work on a drive shaft of this type is normally carried out by a trained technician; reference MR580389 is no exception.
Fitting crews handling drive shaft replacement should support the assembly on stands and mark the phasing before disassembly.
The drive shaft u joint replacement sequence in the installation notes mirrors standard workshop practice for this driveline class.
Fitting crews handling drive shaft repair kit should support the assembly on stands and mark the phasing before disassembly.
The drive shaft removal tool sequence in the installation notes mirrors standard workshop practice for this driveline class.
Inspect the neighbouring drive shaft constant velocity joint hardware for wear while the assembly is on the bench.
Renewing the hardware around drive shaft grease at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring drive shaft u joints hardware for wear while the assembly is on the bench.
Inspect the neighbouring drive shaft bearings hardware for wear while the assembly is on the bench.
Warranty for MR580389
Reference MR580389 (a drive shaft) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for MR580389 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a seized centre bearing or an unbalanced prop shaft is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Mitsubishi; Mitsubishi references identify the application only.
Buyers comparing drive shaft cost for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Frequently asked questions
Is this a genuine Mitsubishi part matching reference MR580389?
How do I confirm MR580389 fits my vehicle?
What is the minimum order for MR580389?
How is pricing for MR580389 shown?
What is the warranty period for MR580389?
Are packaged weight and carton size published for MR580389?
Which numbers does MR580389 cover?
What failure signs indicate I need MR580389?
Related parts and pages
Workshops ordering MR580389 Propeller Drive Shaft (MR580389) usually check these pages next. Listed applications for reference MR580389 include Pajero, Montero and Shogun III(V6_W, V7_W — V64W/V65W/V68W/V73W/V74W/V75W/V77W/V78W), Pajero, Montero and Shogun III Canvas Top(V6_W, V7_W), Pajero, Montero and Shogun IV(V8_W, V9_W); common wear shows as clunk, bang when engaging drive or reverse, or when changing direction of power flow — worn universal joint play.
Support and ordering for MR580389
Send reference MR580389, quantity and destination and we will reply with availability, lead time and a delivered quotation for MR580389 Propeller Drive Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for MR580389 are published on the site policy pages.
Catalogue descriptions that mention drive shaft pajero normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft d normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft loop normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft and axle normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft bushing normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about drive shaft snapped before ordering.
Reviews