3715A097 Rear Axle Shaft Replacement for Mitsubishi Pajero
3715A097 Rear Axle Shaft For Mitsubishi Pajero IV – V93W / V94W / V95W / V96W / V97W / V98W. Match part number 3715A097 before ordering; wholesale supply.
$67.50
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
Rear axle drive shaft (rear half-shaft with inner and outer constant-velocity joints), Mitsubishi part number 3715A097 — fitted left or right on the Mitsubishi Pajero, Montero and Shogun IV(V8_W, V9_W) independent rear suspension
It is produced for Mitsubishi applications.
Covered models include Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel).
Catalogues list an application range of Pajero IV from 2006/2007 onward; FEBEST application data for OE 3715A097 references production dates up to 06/2011 (3.2 DI-D V98W), 12/2012 (3.0 V83W/V93W) and 03/2013 (3.8 V87W/V97W).
Body material is Steel shaft with CV joints and rubber/neoprene boots.
It is supplied as a compatible replacement for Mitsubishi references, not as a genuine Mitsubishi-branded part.
Shopping notes: cv axle shaft replacement cost searches end well when the casting references and flange pattern are checked before checkout.
Our sales desk answers cost to replace cv axle shaft questions daily and quotes by WhatsApp with lead time and freight included.
Catalogue descriptions that mention cv axle shaft assembly normally refer to the same driveline family documented here.
Catalogue descriptions that mention front cv axle shaft normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about aar cv axle shaft before ordering.
Catalogue descriptions that mention cv axle shaft en español normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching cv drive axle shaft.
This unit is frequently shortlisted by parts departments researching front driver side cv axle shaft.
Shoppers asking “How to install cv axle shaft?” will find the practical answer in the fitment and specification notes above.
| Product type | Axle Shaft |
| Part number | 3715A097 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 10 pieces |
| Make | Mitsubishi |
| Models | Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel) |
| Application range | Pajero IV from 2006/2007 onward; FEBEST application data for OE 3715A097 references production dates up to 06/2011 (3.2 DI-D V98W), 12/2012 (3.0 V83W/V93W) and 03/2013 (3.8 V87W/V97W) |
| Engine code | 4M41 (3.2 DI-D diesel), 6G72 (3.0 V6 petrol), 6G74 (3.5 V6 petrol), 6G75 (3.8 V6 petrol) |
| Fitting position | Rear axle left and rear axle right (fits either side) |
| Material | Steel shaft with CV joints and rubber/neoprene boots |
| Published specification | Length 820 mm; external toothing wheel side 33 teeth; external toothing differential side 33 teeth; ABS ring 50 teeth, ABS ring diameter 102 mm; catalogued by ERA Benelux as 'without differential lock' |
| Country of origin | China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Mitsubishi-branded, not a genuine Mitsubishi part. Reference design: Mitsubishi (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Match the number stamped on your old shaft and compare the photo with the original part before ordering.
Reference and OE numbers
- 3715A097
Cross references
- 3715A098
- 3715A099 (sibling part numbers on the same Pajero IV rear shaft family)
- 3815A196
- 3815A200
- ERA Benelux DA948025
- GSP 203944
- GSP 239261
- SHAFTEC MI208LR
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is 3715A097.
- Numbers are often written in grouped form on the part or label, for example 3715A097.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Axle Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Material | Steel shaft with CV joints and rubber/neoprene boots | Reference |
| Published specification | Length 820 mm; external toothing wheel side 33 teeth; external toothing differential side 33 teeth; ABS ring 50 teeth, ABS ring diameter 102 mm; catalogued by ERA Benelux as 'without differential lock' | Reference |
| Application range | Pajero IV from 2006/2007 onward; FEBEST application data for OE 3715A097 references production dates up to 06/2011 (3.2 DI-D V98W), 12/2012 (3.0 V83W/V93W) and 03/2013 (3.8 V87W/V97W) | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
Technicians documenting cv axle shaft leaking recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
For cv axle shaft diagram, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
Product features
- Rear axle drive shaft (rear half-shaft with inner and outer constant-velocity joints), Mitsubishi part number 3715A097 — fitted left or right on the Mitsubishi Pajero, Montero, S
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Steel shaft with CV joints and rubber/neoprene boots construction for service in Driveline duty.
- Built as a compatible replacement for Mitsubishi references, supplied as an independent part and not as a Mitsubishi-branded product.
- Wholesale packing with a minimum order of 10 pieces.
- Each unit is checked against the numbers listed above before dispatch.
This unit is frequently shortlisted by parts departments researching trakmotive cv axle shaft.
Catalogue descriptions that mention custom cv axle shafts normally refer to the same driveline family documented here.
Catalogue descriptions that mention cv axle shaft c clip normally refer to the same driveline family documented here.
Catalogue descriptions that mention cv axle shaft lock ring normally refer to the same driveline family documented here.
Catalogue descriptions that mention ford focus cv axle shaft normally refer to the same driveline family documented here.
Catalogue descriptions that mention front right cv axle shaft normally refer to the same driveline family documented here.
Renewing the hardware around cv joint axle shaft assembly at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring cv axle shaft support bearing bracket hardware for wear while the assembly is on the bench.
Renewing the hardware around cv axle shaft bearing at the same time as the main assembly avoids a second teardown later.
A careful cv axle shaft seal replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful cv axle shaft puller job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
What is included
Reference 3715A097 suits Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel) at the Rear axle left and rear axle right (fits either side). Order 3715A097 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Torn or cracked CV boot is the root cause of most failures — grease is thrown out and water/grit enters the joint
- Clicking or popping noise when turning, accelerating away from a stop — worn outer CV joint
- Vibration or shudder under acceleration — worn inner (differential-side) plunge joint
- Grease splattered on the inside of the rear wheel, on the suspension arms or on the brake backing plate — confirms a split boot
- Clunk when taking up drive — excessive joint or spline play
- Once contamination has scored the joint, rebooting will not fix the noise; the complete shaft assembly is the normal repair
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
If bad cv axle shaft symptoms appears after a load change, the phasing and balance of the driveline should be re-verified on a lift.
Workshop experience links cv axle shaft noise to worn universal joints or a tired centre bearing, so the assembly is normally inspected end to end.
Installation notes
These steps apply to axle shaft reference 3715A097, listed for Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel).
- Confirm reference 3715A097 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around 3715A097.
- Fit 3715A097 in the original orientation at the Rear axle left and rear axle right (fits either side) and tighten fixings to the vehicle manufacturer values.
- Keep the joint angles inside the manufacturer limit while the shaft is out.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference 3715A097 is the axle shaft for Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel) at the Rear axle left and rear axle right (fits either side). Keep the joint angles inside the manufacturer limit while the shaft is out.Listed applications include Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel); fitment is at the Rear axle left and rear axle right (fits either side); watch for torn or cracked cv boot is the root cause of most failures — grease is thrown out and water/grit enters the joint; construction uses Steel shaft with CV joints and rubber/neoprene boots for reference 3715A097
Work on a axle shaft of this type is normally carried out by a trained technician; reference 3715A097 is no exception.
Renewing the hardware around cv axle shaft carrier bearing bracket at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around axle shaft cv joint at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring cv axle shaft boot hardware for wear while the assembly is on the bench.
The cv axle shaft repair sequence in the installation notes mirrors standard workshop practice for this driveline class.
A careful cv axle shaft popper tool job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
The cv axle shaft removal tool sequence in the installation notes mirrors standard workshop practice for this driveline class.
Warranty for 3715A097
Reference 3715A097 (a axle shaft at the Rear axle left and rear axle right (fits either side)) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for 3715A097 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a torn boot that allowed contamination is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Mitsubishi; Mitsubishi references identify the application only.
Buyers comparing best brand cv axle shaft for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Buyers comparing cv axle shaft cost for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Frequently asked questions
Is this a genuine Mitsubishi part matching reference 3715A097?
How do I confirm 3715A097 fits my vehicle?
What is the minimum order for 3715A097?
How is pricing for 3715A097 shown?
What is the warranty period for 3715A097?
Are packaged weight and carton size published for 3715A097?
Which numbers does 3715A097 cover?
Where does reference 3715A097 fit on the vehicle?
What failure signs indicate I need 3715A097?
Related parts and pages
Workshops ordering 3715A097 Rear Axle Shaft (3715A097) usually check these pages next. Listed applications for reference 3715A097 include Pajero, Montero and Shogun IV(V8_W, V9_W), V83W, V93W (3.0 petrol), V85W (3.5 petrol), V87W, V97W (3.8 petrol), V98W, V88W (3.2 DI-D diesel); fitment is at the Rear axle left and rear axle right (fits either side); construction uses Steel shaft with CV joints and rubber/neoprene boots; common wear shows as torn or cracked cv boot is the root cause of most failures — grease is thrown out and water/grit enters the joint.
Support and ordering for 3715A097
Send reference 3715A097, quantity and destination and we will reply with availability, lead time and a delivered quotation for 3715A097 Rear Axle Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for 3715A097 are published on the site policy pages.
The notes above summarise what buyers typically need to know about precision cv axle shaft before ordering.
The notes above summarise what buyers typically need to know about a premium cv axle shaft before ordering.
The notes above summarise what buyers typically need to know about broken cv axle shaft before ordering.
This unit is frequently shortlisted by parts departments researching cv axle shaft in spanish.
The notes above summarise what buyers typically need to know about dana 30 cv axle shafts before ordering.
The notes above summarise what buyers typically need to know about front left cv axle shaft before ordering.
For the question “What is a cv axle shaft?” the practical starting point is to verify the reference number, the engine code plate and the mounting points.
For the question “How to remove cv axle shaft?” the practical starting point is to verify the reference number, the engine code plate and the mounting points.
Reviews