43430-60060 Front Axle Shaft Replacement for Toyota 4Runner
43430-60060 Front Axle Shaft For Toyota 4Runner / Land Cruiser Prado / FJ Cruiser / Hilux Surf. Match part number 43430-60060 before ordering; wholesale.
$43.50
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| make | |
|---|---|
| model | |
| engine | |
| position |
Product Details
Front drive shaft, CV half-shaft assembly, Toyota part number 43430-60060 (superseded by 43430-60062) — genuine Toyota description 'Shaft Assembly, Front Drive, RH', position front outer passenger side, complete with inner and outer constant-velocity joints and boots
It is produced for Toyota (also Lexus GX470, GX460 applications) applications.
Covered models include Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-).
Catalogues list an application range of 2003-2009 (4Runner N210, Prado J120, GX470); FJ Cruiser 2007-2010 per Toyota parts catalog.
Body material is Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease.
It is supplied as a compatible replacement for Toyota references, not as a genuine Toyota-branded part.
This unit is frequently shortlisted by parts departments researching cv axle shaft.
This unit is frequently shortlisted by parts departments researching axle shaft front.
The notes above summarise what buyers typically need to know about broken axle shaft before ordering.
Catalogue descriptions that mention axle shaft in spanish normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching axle shaft dana 44.
This unit is frequently shortlisted by parts departments researching axle shafts for dana 30.
This unit is frequently shortlisted by parts departments researching axle shaft jeep.
Buyers comparing axle shaft replacement cost for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
| Product type | Axle Shaft |
| Part number | 43430-60060 | 43430-60061 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 20 pieces |
| Make | Toyota (also Lexus GX470, GX460 applications) |
| Models | Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-) |
| Application range | 2003-2009 (4Runner N210, Prado J120, GX470); FJ Cruiser 2007-2010 per Toyota parts catalog |
| Engine code | 1GR-FE (4.0 V6), 2UZ-FE (4.7 V8), 1KD-FTV (3.0 D-4D), 1KZ-TE (3.0 TD), 5L-E (3.0 D), 3RZ-FE (2.7), 2TR-FE (2.7), 5VZ-FE (3.4 V6, Prado J120 early), 1UR-FE (4.6 V8, Lexus GX460) |
| Fitting position | Front right (RH, passenger side) |
| Material | Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease |
| Published specification | Compressed length approx. 648 mm (25.38-25.47 in); input/output shaft spline count 30/30; complete assembly with inner and outer CV joints, boots and clips; genuine part weight approx. 23 lb (10.4 kg); genuine part dimensions 28.6 x 6.2 x 6.3 in |
| Country of origin | China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Toyota-branded, not a genuine Toyota part. Reference design: Toyota (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Read the code stamped on the removed unit, then match the photo against the part you received.
Reference and OE numbers
- 43430-60060
- 43430-60061
Cross references
- 43430-60061
- 43430-60062 (Toyota supersession of 43430-60060)
- 43430-04070
- 43430-60080
- 43430-60081
- 43430-60082
- 43430-60090
- GSP NCV69170
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is 43430-60060.
- Numbers are often written in grouped form on the part or label, for example 43430-60061.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Axle Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Material | Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease | Reference |
| Published specification | Compressed length approx. 648 mm (25.38-25.47 in); input/output shaft spline count 30/30; complete assembly with inner and outer CV joints, boots and clips; genuine part weight approx. 23 lb (10.4 kg); genuine part dimensions 28.6 x 6.2 x 6.3 in | Reference |
| Application range | 2003-2009 (4Runner N210, Prado J120, GX470); FJ Cruiser 2007-2010 per Toyota parts catalog | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
For axle shaft inspection, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
Workshop experience links symptoms of a bad axle shaft to worn universal joints or a tired centre bearing, so the assembly is normally inspected end to end.
If bad rear axle shaft symptoms appears after a load change, the phasing and balance of the driveline should be re-verified on a lift.
Product features
- Front drive shaft, CV half-shaft assembly, Toyota part number 43430-60060 (superseded by 43430-60062) — genuine Toyota description 'Shaft Assembly, Front Drive, RH', position fron
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease construction for service in Driveline duty.
- Built as a compatible replacement for Toyota references, supplied as an independent part and not as a Toyota-branded product.
- Wholesale packing with a minimum order of 20 pieces.
- Each unit is checked against the numbers listed above before dispatch.
The notes above summarise what buyers typically need to know about drive axle shaft before ordering.
This unit is frequently shortlisted by parts departments researching axle shafts for dana 44.
The notes above summarise what buyers typically need to know about axle shaft car before ordering.
Catalogue descriptions that mention differential axle shaft normally refer to the same driveline family documented here.
Catalogue descriptions that mention axle shaft truck normally refer to the same driveline family documented here.
Catalogue descriptions that mention axle shaft images normally refer to the same driveline family documented here.
Inspect the neighbouring axle shaft seal hardware for wear while the assembly is on the bench.
Inspect the neighbouring axle shaft oil seal hardware for wear while the assembly is on the bench.
Inspect the neighbouring axle shaft boot hardware for wear while the assembly is on the bench.
Reference notes for axle shaft nut torque stay within the measured, source-labelled values published on this page.
A careful axle shaft removal tool job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful automotive replacement axle shafts job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
What is included
Reference 43430-60060 suits Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-) at the Front right (RH, passenger side). Order 43430-60060 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Rhythmic clicking or popping when turning, especially at low speed, full lock — worn outer CV joint, almost always preceded by a torn boot
- Grease flung onto the inside of the wheel, fender liner, brake caliper or suspension arms — split or cracked CV boot throwing its lubricant out by centrifugal force
- Vibration or shudder through the steering wheel or floor under hard acceleration — worn inner CV joint, plunge joint
- Clunk when shifting into drive or reverse — excessive play in the joints or splines
- Once contamination (water, dust, grit) enters a torn boot the internal ball bearings and races wear permanently; adding grease will not cure an already-clicking joint
- Advanced failure: joint cage breaks, axle can separate, and a flailing shaft can damage brake lines, the transmission case or the oil pan
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Technicians documenting bad axle shaft symptoms recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Technicians documenting symptoms of bad axle shaft recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Installation notes
These steps apply to axle shaft reference 43430-60060, listed for Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-).
- Confirm reference 43430-60060 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around 43430-60060.
- Fit 43430-60060 in the original orientation at the Front right (RH, passenger side) and tighten fixings to the vehicle manufacturer values.
- Keep the joint angles inside the manufacturer limit while the shaft is out.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference 43430-60060 is the axle shaft for Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-) at the Front right (RH, passenger side). Keep the joint angles inside the manufacturer limit while the shaft is out.Listed applications include Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-); fitment is at the Front right (RH, passenger side); watch for rhythmic clicking or popping when turning, especially at low speed, full lock — worn outer cv joint, almost always preceded by a torn boot; construction uses Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease for reference 43430-60060
Work on a axle shaft of this type is normally carried out by a trained technician; reference 43430-60060 is no exception.
Renewing the hardware around axle shaft bearing at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around axle shaft u joint at the same time as the main assembly avoids a second teardown later.
Fitting crews handling axle shaft repair should support the assembly on stands and mark the phasing before disassembly.
Fitting crews handling axle shaft puller should support the assembly on stands and mark the phasing before disassembly.
Warranty for 43430-60060
Reference 43430-60060 (a axle shaft at the Front right (RH, passenger side)) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for 43430-60060 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a torn boot that allowed contamination is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Toyota; Toyota references identify the application only.
Buyers comparing cost to replace axle shaft for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Frequently asked questions
Is this a genuine Toyota part matching reference 43430-60060?
How do I confirm 43430-60060 fits my vehicle?
What is the minimum order for 43430-60060?
How is pricing for 43430-60060 shown?
What is the warranty period for 43430-60060?
Are packaged weight and carton size published for 43430-60060?
Which numbers does 43430-60060 cover?
Where does reference 43430-60060 fit on the vehicle?
What failure signs indicate I need 43430-60060?
Related parts and pages
Workshops ordering 43430-60060 Front Axle Shaft (43430-60060) usually check these pages next. Listed applications for reference 43430-60060 include Toyota 4Runner (N210, 2003-2009), Toyota FJ Cruiser (GSJ10/GSJ15, 2007-2010), Toyota Land Cruiser Prado J120 (GRJ120/KDJ120/KDJ125/KZJ120/LJ120/RZJ120/TRJ120, 2002-2009), Toyota Land Cruiser Prado J150, Lexus GX470 (UZJ120, 2003-2009), Lexus GX460 (URJ150, 2010-); fitment is at the Front right (RH, passenger side); construction uses Forged, high-strength steel shaft with neoprene CV boots and molybdenum grease; common wear shows as rhythmic clicking or popping when turning, especially at low speed, full lock — worn outer cv joint, almost always preceded by a torn boot.
Support and ordering for 43430-60060
Send reference 43430-60060, quantity and destination and we will reply with availability, lead time and a delivered quotation for 43430-60060 Front Axle Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for 43430-60060 are published on the site policy pages.
The notes above summarise what buyers typically need to know about axle shafts before ordering.
Catalogue descriptions that mention axle shaft rear normally refer to the same driveline family documented here.
Catalogue descriptions that mention car axle shaft normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about axle shafts dana 60 before ordering.
The notes above summarise what buyers typically need to know about axle shaft lock c clip before ordering.
The notes above summarise what buyers typically need to know about axle shaft assy before ordering.
Shoppers asking “What is an axle shaft?” will find the practical answer in the fitment and specification notes above.
Reviews