43430-35022 Drive Shaft Replacement for Toyota Hilux Vigo
43430-35022 Drive Shaft For Toyota Hilux – N1xx series pickup. Match part number 43430-35022 before ordering; wholesale supply with volume pricing shown on.
$41.10
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
Toyota genuine part 43430-35022 – 'SHAFT ASSY, FRONT DRIVE, RH/LH': a complete front CV drive shaft (half-shaft) assembly with inner and outer constant-velocity joints, running between the front differential and the steering knuckle/hub on 4WD Toyota Hilux
Covered models include Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174.
Catalogues list an application range of 08/1997 – 02/2006 (Japan market 08/1997-06/2004; Europe 08/1997-07/2005; General/other 08/1997-02/2006). Catalog engine-year splits: 2.4D 2L-T 1997-2001, 3.0D 5L 1997-2005, 2.7 3RZ-FE 2001-2004, 2.5 D-4D 2KD-FTV 2001-2005, 2.0 1RZ-E 1997-2005.
Body material is Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg.
It is supplied as a compatible replacement for Toyota references, not as a genuine Toyota-branded part.
This unit is frequently shortlisted by parts departments researching front axle shaft assembly.
This unit is frequently shortlisted by parts departments researching axle shaft parts.
The notes above summarise what buyers typically need to know about axle shaft broken before ordering.
The notes above summarise what buyers typically need to know about axle shaft collar before ordering.
Catalogue descriptions that mention axle shaft cover normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about axle shaft differential before ordering.
Shopping notes: axle shaft assembly replacement cost searches end well when the casting references and flange pattern are checked before checkout.
Shopping notes: axle shaft assembly cost searches end well when the casting references and flange pattern are checked before checkout.
| Product type | Axle Shaft |
| Part number | 43430-35022 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 5 pieces |
| Models | Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174 |
| Application range | 08/1997 – 02/2006 (Japan market 08/1997-06/2004; Europe 08/1997-07/2005; General/other 08/1997-02/2006). Catalog engine-year splits: 2.4D 2L-T 1997-2001, 3.0D 5L 1997-2005, 2.7 3RZ-FE 2001-2004, 2.5 D-4D 2KD-FTV 2001-2005, 2.0 1RZ-E 1997-2005 |
| Engine code | 5L (3.0 D), 3RZ-FE (2.7 petrol), 2L-T (2.4 TD), 2KD-FTV (2.5 D-4D), 1RZ-E (2.0 petrol), 3L (2.8 D) |
| Fitting position | Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints |
| Material | Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg |
| Published specification | Complete front CV drive shaft assembly (inner + outer joint), genuine unit weight approx. 9.255 kg; typical aftermarket outer spline, wheel-side external toothing 26 teeth; external toothing on diff side ~27-28 depending on catalogue. Left/right interchangeability is catalogue-dependent – verify by VIN/frame before listing a fixed side |
| Country of origin | China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Toyota-branded, not a genuine Toyota part. Reference design: Toyota (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Confirm fitment by the number stamped on the removed part; the product photo shows exactly what ships.
Reference and OE numbers
- 43430-35022
Cross references
- 12-090219 (ODM-MULTIPARTS)
- JCV512N (SHAFTEC)
- CV9112A (BGA)
- 859016, DCV859016 (DYNAMATRIX)
- 23972 (SPIDAN)
- 303867 (LOBRO)
- 40-0408 (TrakMotive)
- 16564 (MAPCO)
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is 43430-35022.
- Numbers are often written in grouped form on the part or label, for example 43430-35022.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Axle Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Material | Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg | Reference |
| Published specification | Complete front CV drive shaft assembly (inner + outer joint), genuine unit weight approx. 9.255 kg; typical aftermarket outer spline, wheel-side external toothing 26 teeth; external toothing on diff side ~27-28 depending on catalogue. Left/right interchangeability is catalogue-dependent – verify by VIN/frame before listing a fixed side | Reference |
| Application range | 08/1997 – 02/2006 (Japan market 08/1997-06/2004; Europe 08/1997-07/2005; General/other 08/1997-02/2006). Catalog engine-year splits: 2.4D 2L-T 1997-2001, 3.0D 5L 1997-2005, 2.7 3RZ-FE 2001-2004, 2.5 D-4D 2KD-FTV 2001-2005, 2.0 1RZ-E 1997-2005 | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
Workshop experience links axle shaft bearing noise to worn universal joints or a tired centre bearing, so the assembly is normally inspected end to end.
Technicians documenting axle shaft boot leaking recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Reference notes for axle shaft diagram stay within the measured, source-labelled values published on this page.
Product features
- Toyota genuine part 43430-35022 – 'SHAFT ASSY, FRONT DRIVE, RH/LH': a complete front CV drive shaft (half-shaft) assembly with inner and outer constant-velocity joints, running bet
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg construction for service in Driveline duty.
- Built as a compatible replacement for Toyota references, supplied as an independent part and not as a Toyota-branded product.
- Wholesale packing with a minimum order of 5 pieces.
- Each unit is checked against the numbers listed above before dispatch.
A careful axle shaft seal replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Fitting crews handling axle shaft seal installer should support the assembly on stands and mark the phasing before disassembly.
The cv axle shaft assembly replacement sequence in the installation notes mirrors standard workshop practice for this driveline class.
The axle shaft boot replacement sequence in the installation notes mirrors standard workshop practice for this driveline class.
Renewing the hardware around cv axle shaft seal at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring axle shaft bolt hardware for wear while the assembly is on the bench.
Catalogue descriptions that mention axle shaft market normally refer to the same driveline family documented here.
Catalogue descriptions that mention axle shaft assembly parts normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching axle shaft c clip.
The notes above summarise what buyers typically need to know about axle shaft coupling before ordering.
This unit is frequently shortlisted by parts departments researching axle shaft diameter.
This unit is frequently shortlisted by parts departments researching axle shaft en español.
What is included
Reference 43430-35022 suits Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174 at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints. Order 43430-35022 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Torn or cracked CV boot -> grease escapes, water/dirt enters -> rapid joint wear; visible as dark grease flung on the inside of the wheel, control arm or brake caliper
- Rhythmic clicking, popping noise on low-speed sharp turns (classic worn outer CV joint symptom) – the noise speeds up with wheel speed
- Vibration or shudder under acceleration from a worn inner CV joint (tripod bearing clearance) or a bent shaft; vibration worsening with road speed
- Clunk or knock when shifting between Drive and Reverse or on/off throttle, indicating excessive joint play
- Grease seepage, heavy grease around the joint caps or boot clamps indicating a failed seal
- Corrosion and rust-coloured dust around the joint from salt/water ingress
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Technicians documenting signs of a broken axle shaft recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
If axle shaft bearing symptoms appears after a load change, the phasing and balance of the driveline should be re-verified on a lift.
Technicians documenting axle shaft design recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Installation notes
These steps apply to axle shaft reference 43430-35022, listed for Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174.
- Confirm reference 43430-35022 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around 43430-35022.
- Fit 43430-35022 in the original orientation at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints and tighten fixings to the vehicle manufacturer values.
- Keep the joint angles inside the manufacturer limit while the shaft is out.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference 43430-35022 is the axle shaft for Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174 at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints. Keep the joint angles inside the manufacturer limit while the shaft is out.Listed applications include Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174; fitment is at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints; watch for torn or cracked cv boot -> grease escapes, water/dirt enters -> rapid joint wear; visible as dark grease flung on the inside of the wheel, control arm or brake caliper; construction uses Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg for reference 43430-35022
Work on a axle shaft of this type is normally carried out by a trained technician; reference 43430-35022 is no exception.
Fitting crews handling axle shaft replacement should support the assembly on stands and mark the phasing before disassembly.
A careful axle shaft bearing replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
The axle shaft bearing puller sequence in the installation notes mirrors standard workshop practice for this driveline class.
A careful axle shaft bearing removal tool job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Inspect the neighbouring axle shaft seal front hardware for wear while the assembly is on the bench.
Renewing the hardware around axle shaft boots at the same time as the main assembly avoids a second teardown later.
Warranty for 43430-35022
Reference 43430-35022 (a axle shaft at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for 43430-35022 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a torn boot that allowed contamination is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Toyota; Toyota references identify the application only.
Shopping notes: axle shaft repair cost searches end well when the casting references and flange pattern are checked before checkout.
Our sales desk answers axle shaft cost questions daily and quotes by WhatsApp with lead time and freight included.
Frequently asked questions
Is this a genuine Toyota part matching reference 43430-35022?
How do I confirm 43430-35022 fits my vehicle?
What is the minimum order for 43430-35022?
How is pricing for 43430-35022 shown?
What is the warranty period for 43430-35022?
Are packaged weight and carton size published for 43430-35022?
Which numbers does 43430-35022 cover?
Where does reference 43430-35022 fit on the vehicle?
What failure signs indicate I need 43430-35022?
Related parts and pages
Workshops ordering 43430-35022 Drive Shaft (43430-35022) usually check these pages next. Listed applications for reference 43430-35022 include Toyota Hilux (6th generation, N1xx chassis) – frames LN147/16*/17*, RZN147/152/16*/174 (Japan market), Toyota Hilux – KZN165/190, KDN, LN, RZN, YN, VZN14*/15*/16*/17*/19* (General market), Toyota Hilux – KDN1**, LN1**, RZN168/173 (Europe market), Toyota Hilux Closed Off-Road Vehicle, Hilux III SUV (RZN1_, LN1_, N1/N2) – e.g. LN165/166/167/170/172, RZN168/169/173/174; fitment is at the Front axle, left OR right – the same part number is catalogued as 'SHAFT ASSY, FRONT DRIVE, RH' and as 'LH' depending on market/frame, and aftermarket catalogues list it as Front Axle Left, Front Axle Right. Complete assembly with both inner and outer CV joints; construction uses Steel (solid steel shaft with constant-velocity joints and rubber/thermoplastic boots); genuine assembly weight approx. 9.255 kg / ~9.27 kg; common wear shows as torn or cracked cv boot -> grease escapes, water/dirt enters -> rapid joint wear; visible as dark grease flung on the inside of the wheel, control arm or brake caliper.
Support and ordering for 43430-35022
Send reference 43430-35022, quantity and destination and we will reply with availability, lead time and a delivered quotation for 43430-35022 Drive Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for 43430-35022 are published on the site policy pages.
This unit is frequently shortlisted by parts departments researching cv axle shafts.
This unit is frequently shortlisted by parts departments researching rear axle shaft assembly.
Catalogue descriptions that mention axle shaft bushing normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching axle shaft coupler.
This unit is frequently shortlisted by parts departments researching axle shaft definition.
Catalogue descriptions that mention axle shaft dodge ram 1500 normally refer to the same driveline family documented here.
Reviews