27101-66J01 Drive Shaft Replacement for Suzuki Grand Vitara
27101-66J01 Drive Shaft For Suzuki Grand Vitara. Match part number 27101-66J01 before ordering; wholesale supply with volume pricing shown on the product page.
Original price was: $45.00.$41.54Current price is: $41.54.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Details
Front propeller shaft, propshaft assembly (drive shaft) for Suzuki Grand Vitara II (JT, TE, TD chassis, also sold as Grand Escudo, Grand Nomade). Suzuki genuine part number 27101-66J01 (also written 2710166J01, with suffix variant 27101-66J01-000)
Covered models include Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3.
Catalogues list an application range of 2005-2015 for Grand Vitara II (JT/TE/TD); 2006-2014 as quoted by most aftermarket propshaft listings; one US listing narrows it to 2006-2008.
Body material is Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection).
It is supplied as a compatible replacement for Suzuki references, not as a genuine Suzuki-branded part.
Catalogue descriptions that mention suzuki grand vitara drive shaft normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching drive shaft disconnect for flat towing.
This unit is frequently shortlisted by parts departments researching drive shaft ford.
This unit is frequently shortlisted by parts departments researching drive shaft manufacturers.
This unit is frequently shortlisted by parts departments researching drive shaft pro.
Catalogue descriptions that mention drive shaft socket normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching drive shaft twist.
This unit is frequently shortlisted by parts departments researching automotive drive shaft market.
The notes above summarise what buyers typically need to know about suzuki dr650e before ordering.
The notes above summarise what buyers typically need to know about suzuki gsxr750 before ordering.
The notes above summarise what buyers typically need to know about suzuki gsxr600 before ordering.
Buyers comparing drive shaft seal replacement cost for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
| Product type | Drive Shaft |
| Part number | 27101-66J01 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 2 pieces |
| Models | Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3 |
| Application range | 2005-2015 for Grand Vitara II (JT/TE/TD); 2006-2014 as quoted by most aftermarket propshaft listings; one US listing narrows it to 2006-2008 |
| Material | Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection) |
| Published specification | Front propshaft, approx. 835 mm overall length (KAMOKA 835 mm; aftermarket listing 32.874 in, 834.9 mm; FEBEST pack length 75.5 cm); tube outer diameter ~40 mm with 86 mm flange OD; bolt hole circle 74 mm (KAMOKA). Weight quoted 4.65-5.15 kg (FEBEST, MACHTER and KAMOKA). Supplied pre-assembled and factory balanced; non-greasable. NOTE: the 13 lb, 32 x 5 x 5 in figure on one US listing is a packaging figure, not the shaft length |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto — not Suzuki-branded, not a genuine Suzuki part. Reference design: Suzuki (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Confirm the stamped number on the old component and use the photo as your fitting reference.
Reference and OE numbers
- 27101-66J01
Cross references
- 27101-66J01-000 (Suzuki suffix variant)
- FEBEST ASSZ-PSJB420
- NTY NWN-SU-001
- KAMOKA 5020190
- GSP PS900608
- ESEN SKV 76SKV139
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is 27101-66J01.
- Numbers are often written in grouped form on the part or label, for example 27101-66J01.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Drive Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Material | Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection) | Reference |
| Published specification | Front propshaft, approx. 835 mm overall length (KAMOKA 835 mm; aftermarket listing 32.874 in, 834.9 mm; FEBEST pack length 75.5 cm); tube outer diameter ~40 mm with 86 mm flange OD; bolt hole circle 74 mm (KAMOKA). Weight quoted 4.65-5.15 kg (FEBEST, MACHTER and KAMOKA). Supplied pre-assembled and factory balanced; non-greasable. NOTE: the 13 lb, 32 x 5 x 5 in figure on one US listing is a packaging figure, not the shaft length | Reference |
| Application range | 2005-2015 for Grand Vitara II (JT/TE/TD); 2006-2014 as quoted by most aftermarket propshaft listings; one US listing narrows it to 2006-2008 | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
Reference notes for drive shaft critical speed calculator stay within the measured, source-labelled values published on this page.
Product features
- Front propeller shaft, propshaft assembly (drive shaft) for Suzuki Grand Vitara II (JT, TE, TD chassis, also sold as Grand Escudo, Grand Nomade). Suzuki genuine part number 271
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection) construction for service in Driveline duty.
- Built as a compatible replacement for Suzuki references, supplied as an independent part and not as a Suzuki-branded product.
- Wholesale packing with a minimum order of 2 pieces.
- Each unit is checked against the numbers listed above before dispatch.
The notes above summarise what buyers typically need to know about drive shaft front wheel drive before ordering.
Catalogue descriptions that mention drive shaft for bmw normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft knuckle normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft pic normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft rc car normally refer to the same driveline family documented here.
Catalogue descriptions that mention drive shaft tractor normally refer to the same driveline family documented here.
Catalogue descriptions that mention auto parts drive shaft normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching suzuki drz400.
This unit is frequently shortlisted by parts departments researching suzuki dr650s.
This unit is frequently shortlisted by parts departments researching suzuki gsx1300r hayabusa.
A careful drive shaft tool job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Renewing the hardware around drive shaft parts & accessories at the same time as the main assembly avoids a second teardown later.
What is included
Reference 27101-66J01 suits Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3. Order 27101-66J01 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Driveline vibration that increases with road speed and under load – classic symptom of a worn propshaft U-joint, centre joint throwing the shaft out of balance
- Clunk or thud when shifting between Drive and Reverse, or when getting on/off the throttle – excessive rotational play in the joint
- Rhythmic squeak or chirp at low speed from a dry, unlubricated joint bearing
- Fine orange-brown rust dust around the joint bearing caps – oxidised metal from dry grinding wear; also indicates grease seal failure and water ingress
- Visible play when the shaft is twisted or pushed side-to-side by hand – needle bearings have worn cavities into the cap/trunnion
- In extreme cases complete joint failure lets the propshaft separate; the flailing shaft can damage the transfer case, transmission, exhaust, brake or fuel lines
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Workshop experience links automotive drive shaft design to worn universal joints or a tired centre bearing, so the assembly is normally inspected end to end.
Installation notes
These steps apply to drive shaft reference 27101-66J01, listed for Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3.
- Confirm reference 27101-66J01 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around 27101-66J01.
- Fit 27101-66J01 in the original orientation and tighten fixings to the vehicle manufacturer values.
- Support the shaft so the joints are not left hanging while it is unbolted.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference 27101-66J01 is the drive shaft for Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3. Support the shaft so the joints are not left hanging while it is unbolted.Listed applications include Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3; watch for driveline vibration that increases with road speed and under load – classic symptom of a worn propshaft u-joint, centre joint throwing the shaft out of balance; construction uses Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection) for reference 27101-66J01
Work on a drive shaft of this type is normally carried out by a trained technician; reference 27101-66J01 is no exception.
A careful drive shaft slip yoke replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful automotive drive shaft repair job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Inspect the neighbouring previa accessory drive shaft hardware for wear while the assembly is on the bench.
Warranty for 27101-66J01
Reference 27101-66J01 (a drive shaft) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for 27101-66J01 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from a seized centre bearing or an unbalanced prop shaft is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with Suzuki; Suzuki references identify the application only.
Frequently asked questions
Is this a genuine Suzuki part matching reference 27101-66J01?
How do I confirm 27101-66J01 fits my vehicle?
What is the minimum order for 27101-66J01?
How is pricing for 27101-66J01 shown?
What is the warranty period for 27101-66J01?
Are packaged weight and carton size published for 27101-66J01?
Which numbers does 27101-66J01 cover?
What failure signs indicate I need 27101-66J01?
Related parts and pages
Workshops ordering 27101-66J01 Drive Shaft (27101-66J01) usually check these pages next. Listed applications for reference 27101-66J01 include Suzuki Grand Vitara II (JT, TE, TD) 2005-2015, Suzuki Grand Escudo II, Grand Nomade (JT, TE, TD) 2005-2015, Suzuki Escudo JB416, JB420, JB627 (2006-2014), 4WD chassis codes: JB416X, JB416X-2, JB419WD, JB419WD-2/-3, JB419XD, JB419XD-2/-3, JB420W, JB420W-2, JB627W, JB627W-2/-3; construction uses Steel shaft tubing with universal joints (one aftermarket supplier specifies high-strength steel with anti-rust protection); common wear shows as driveline vibration that increases with road speed and under load – classic symptom of a worn propshaft u-joint, centre joint throwing the shaft out of balance.
Support and ordering for 27101-66J01
Send reference 27101-66J01, quantity and destination and we will reply with availability, lead time and a delivered quotation for 27101-66J01 Drive Shaft.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for 27101-66J01 are published on the site policy pages.
This unit is frequently shortlisted by parts departments researching suzuki drive shaft.
The notes above summarise what buyers typically need to know about drive shaft fell off before ordering.
The notes above summarise what buyers typically need to know about drive shaft guibo before ordering.
The notes above summarise what buyers typically need to know about drive shaft orlando before ordering.
The notes above summarise what buyers typically need to know about drive shaft pto before ordering.
This unit is frequently shortlisted by parts departments researching drive shaft steel.
The notes above summarise what buyers typically need to know about aftermarket drive shaft before ordering.
Catalogue descriptions that mention aftermarket jet ski drive shafts normally refer to the same driveline family documented here.
Catalogue descriptions that mention suzuki tu250x normally refer to the same driveline family documented here.
Catalogue descriptions that mention suzuki tu250g normally refer to the same driveline family documented here.
Catalogue descriptions that mention suzuki gsx250r normally refer to the same driveline family documented here.
Reviews