Piston Kit 57GC283A Replacement for MACK E6 (2-valve
Piston Kit – compatible replacement for MACK, supplied under Vidishi Auto. Wholesale and B2B pricing on request.
$50.00
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| make | |
|---|---|
| model | |
| engine |
Product Details
At a glance
Trade pricing for the Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit is quoted per order volume and destination — request a volume quote via WhatsApp or email.
Product overview
The Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit is an aftermarket replacement part supplied under the Vidishi Auto brand and forms part of our Pistons range. It is a compatible replacement built to the same fitment as the original-equipment application, and it is not a genuine original part.
Each piston kit is packed for international wholesale distribution from Dongguan, China and is supplied to distributors, repair shops and e-commerce sellers. Wholesale terms, freight handling and warranty administration are confirmed per order and per destination.
Every order is checked before dispatch for cylinder liner bore and out-of-round measured against the std or oversize limit and ring groove clearance and ring end gap checked with the correct diesel ring pack.
Specifications
| Part type | Piston Kit |
|---|---|
| Supplied brand | Vidishi Auto |
| Reference brand | MACK |
| MOQ | 300 pieces |
| Condition | New, aftermarket |
| Brand claim | None – independent aftermarket part |
| Place of origin | Dongguan, China |
| Compatible vehicle | MACK |
| Model | MACK E6 (2-valve |
| Engine code | MACK E6 (2-valve, 4-ring) |
Fitment check
This kit is intended for MACK applications (listed model: MACK E6 (2-valve). Confirm the application before order. Our team verifies fitment against your vehicle or equipment details — send the model, year and engine code for a precise match.
Fitment verification before dispatch — three checks: (1) send the engine code plate or the number stamped on your old piston or the block; (2) a photo of the removed piston, rings and cylinder liner; (3) the VIN or chassis plate number. Our team confirms fitment against these before your order ships.
Engine codes listed: MACK E6 (2-valve, 4-ring). Send your engine code and our team confirms the match before you buy.
Checks before dispatch
Check fitment via WhatsApp Installation guide
Is this part easy to fit? Difficulty depends on the application and the tools on hand: some applications are a direct bolt-on, others need the assembly removed first. Send us your vehicle or equipment details and we will confirm before you buy.
Fitment risk: model-year and trim variations may apply. Always confirm with our parts team before purchase.
Reference & cross numbers
Cross numbers held for the Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit are listed below for identification.
| Reference brand | MACK |
|---|---|
| Compatible vehicle | MACK |
| Part type | Piston Kit |
Verify your part number before ordering
- Locate the stamped or printed marking on your original unit — the reference for this product is 57GC283A.
- Compare the casting or label marking character by character against 57GC283A before you order.
- Send us a photo of the marking on WhatsApp and quote 57GC283A so our team can double-check it for you.
- Your quotation, proforma invoice and order confirmation each carry reference 57GC283A.
- Packing slips and export documents list 57GC283A so every carton stays traceable end to end.
- If the marking on your part differs from 57GC283A, send it anyway — we cross-check it against our catalogue first.
- Reorder or spare-part requests should quote 57GC283A to guarantee an identical specification.
- Warranty and after-sales cases are logged under reference 57GC283A, so coverage is verifiable without the original invoice.
Use the numbers above solely for identification and compatibility matching. This is an independent aftermarket component supplied under the Vidishi Auto brand, not a genuine MACK-branded product.
Key features
Compatible replacement for MACK
Compatible replacement under the Vidishi Auto brand, built to the same fitment as the original-equipment application.
MOQ
300 pieces.
International wholesale packing
Every order is packed for international wholesale distribution in Dongguan, China.
Fitment verified before dispatch
Fitment is verified against your vehicle or equipment details before dispatch.
Export documentation
Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.
When this kit is needed
A worn or failed Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit can lead to drivability, safety or maintenance issues. Typical symptoms reported by workshops include:
Diagnose the root cause with our diagnostic guide before ordering, and confirm the exact application with our team.
Installation
Difficulty varies by application. When in doubt, use a qualified workshop. The full installation guide lists the torque figures and the tools needed for this job.
Warranty
Vidishi Auto backs this aftermarket piston kit with a limited warranty against manufacturing defects. Terms travel with the packing card and are set by your regional agreement. Cover applies to orders from 300 pieces upward.
What is covered: manufacturing defects present in the part as supplied. Service wear, and damage from fitting errors or in-service use, remain outside cover under the regional agreement.
Brand position: this is an independent aftermarket part supplied under the Vidishi Auto brand. It is not a genuine MACK product and carries no MACK approval.
How cover is applied — handling follows the practice used for heavy-duty diesel piston: cylinder liner bore and out-of-round measured against the std or oversize limit. Claims are assessed against that practice and the packing card, not against a generic list.
Making a claim: contact our parts team with the order reference and the part’s packing details; we confirm the next step and the replacement route.
Wholesale & B2B
We supply Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit to distributors, importers, repair shops and e-commerce sellers with flexible MOQ, volume pricing and export support from Dongguan, China.
MOQ
300 pieces — scalable to container loads.
Volume pricing
Volume tiers for the piston kit are quoted per order size and destination.
Export support
Export documents — invoice, packing list and certificate of origin on request — are issued with each export order.
Distributors and importers can request tiered trade pricing for repeat volume, mixed-model consolidation and scheduling against their own sales cycle — send your target volumes for the Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit to our trade desk.
Shipping
The Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit leaves Dongguan, China on 5 major carriers, and in-stock items are handled the same business day. Shipping from China is consolidated per destination, and every export order carries full export documentation — invoice, packing list and certificate of origin on request.
Cross-border delivery runs on standard export Incoterms. The Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit ships under standard B2B terms, and destination-market paperwork is prepared by our trade desk.
Carton data: the Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit does not have a published single-carton size or gross weight yet — our team confirms both per order, so freight is quoted on real carton data rather than estimates.
Buyer feedback
Verified B2B reviews are published after order fulfilment. This heavy-duty diesel piston is an established wholesale line — request references from our team.
Every order is packed for international wholesale distribution in Dongguan, China.
Common questions — Which compression ratio variant do I need?; Can I buy one piston only?
FAQ
Is this a genuine MACK part?+
What vehicles or equipment does it fit?+
What is the MOQ for wholesale?+
What is the lead time for dispatch?+
What is your return and warranty policy?+
Which compression ratio variant do I need?+
Can I buy one piston only?+
Is this a genuine original part?+
Do you provide fitment verification?+
Related
Engine System All parts B2B solutions Buying guides Diagnostics Installation Fuel System Brake System
You can forward this shareable product link to a buyer, purchase manager or workshop. It sits in our Pistons range.
Support
Our parts team replies to fitment, pricing and technical questions inside 24 hours (Mon–Sat, GMT+8).
Order handling: minimum order 300 pieces; single orders and mixed pallets are both quoted per destination.
Orders for the Heavy Duty Engine Piston Kit with Pin and Clip 57GC283A 2V 4-Rings Fit can be consolidated with other lines from the same shipment, and the packing list travels with the goods.
Vidishi Auto is an independent supplier of compatible auto parts and is not affiliated with or endorsed by MACK.
Reviews