4WD Front and Rear Axle Set with Transfer Case 1 to 2 Ton
4WD Front and Rear Axle Set For 1 to 2 ton light 4×4 utility, farm and mining transport vehicles. Match part number SH2022/SH1020/SH-T2020,.
Original price was: $218.00.$210.00Current price is: $210.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| position |
|---|
Product Details
Complete light-duty 4WD drivetrain set for 1-2 ton class vehicles: front drive/steer axle + rear drive axle + transfer case + gearbox supplied as one kit. The transfer case is the intermediate gearbox that receives power from the transmission and splits it to the front and rear axles (part-time units also provide a low-range reduction); such axle-plus-transfer-case packages are a standard architecture for multi-axled off-road, agricultural and mining utility machines
Body material is Steel (high-strength steel axle beams, housings, gears and shafts).
The notes above summarise what buyers typically need to know about axle cv shaft before ordering.
This unit is frequently shortlisted by parts departments researching axle car part.
Catalogue descriptions that mention axle assembly normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about axle assembly rear before ordering.
The notes above summarise what buyers typically need to know about axle for car before ordering.
The notes above summarise what buyers typically need to know about axle parts before ordering.
This unit is frequently shortlisted by parts departments researching front axle car.
Our sales desk answers front axle replacement cost questions daily and quotes by WhatsApp with lead time and freight included.
| Product type | Axle Set |
| Part number | SH2022/SH1020/SH-T2020, SH2022/SH1020/SH-T2020 |
| Condition | New |
| Warranty | 24 Months |
| Minimum order | 1 set |
| Fitting position | Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set |
| Material | Steel (high-strength steel axle beams, housings, gears and shafts) |
| Country of origin | Henan, China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto. Reference design: follows the OEM pattern of the listed application (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Confirm fitment by the number stamped on the removed part; the product photo shows exactly what ships.
Reference and OE numbers
- SH2022/SH1020/SH-T2020, SH2022/SH1020/SH-T2020
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is SH2022/SH1020/SH-T2020, SH2022/SH1020/SH-T2020.
- Numbers are often written in grouped form on the part or label, for example SH2022/SH1020/SH-T2020, SH2022/SH1020/SH-T2020.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | Axle Set | Confirmed |
| Condition | New | Confirmed |
| Warranty | 24 Months | Confirmed |
| Material | Steel (high-strength steel axle beams, housings, gears and shafts) | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
For axle ratio calculator, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
Product features
- Complete light-duty 4WD drivetrain set for 1-2 ton class vehicles: front drive/steer axle + rear drive axle + transfer case + gearbox supplied as one kit. The transfer case is the
- Supplied under the Vidishi Auto brand with a 24 Months warranty against manufacturing defects.
- Steel (high-strength steel axle beams, housings, gears and shafts) construction for service in Driveline duty.
- Wholesale packing with a minimum order of 1 set.
- Each unit is checked against the numbers listed above before dispatch.
Catalogue descriptions that mention detroit axle auto parts normally refer to the same driveline family documented here.
Catalogue descriptions that mention axle for truck normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching front axles.
This unit is frequently shortlisted by parts departments researching front axle in automobile.
This unit is frequently shortlisted by parts departments researching axle of a car.
Catalogue descriptions that mention axle vehicle normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching axle truck.
A careful axle repair job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
A careful axle seal replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
The front axle repair sequence in the installation notes mirrors standard workshop practice for this driveline class.
A careful axle seal puller job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Renewing the hardware around axle seal at the same time as the main assembly avoids a second teardown later.
Inspect the neighbouring axle and bearing hardware for wear while the assembly is on the bench.
Reference notes for axle ratio rpm calculator stay within the measured, source-labelled values published on this page.
What is included
Reference SH2022 suits For 1 to 2 ton light 4×4 utility, farm and mining transport vehicles at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set. Order SH2022 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Axle noise, howling and rumble from worn ring-and-pinion or differential bearings; noise that changes with speed rather than engine rpm, often louder when cornering or under load
- Drive-axle oil leaks from failed pinion seal, axle shaft seals, damaged gaskets, loose housing bolts or a blocked breather
- Drive-axle overheating from too-small gear backlash, over-preloaded bearings or wrong/degraded lubricant
- Transfer case abnormal noise (grinding, whining and humming that varies with speed), difficulty or harsh clunk when shifting between 2H/4H/4L, and fluid leaks from failed seals
- Driveline wind-up, binding and possible gear or chain damage when a part-time (locked) transfer case is used on dry high-grip pavement
- Drum brakes: heat build-up and brake fade under repeated or long braking; disc brakes: better heat dissipation and wet-weather recovery but higher cost
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Technicians documenting axle seal leak recommend checking the slip yoke and U-joints for play before the shaft itself is condemned.
Installation notes
These steps apply to axle set reference SH2022, listed for For 1 to 2 ton light 4×4 utility, farm and mining transport vehicles.
- Confirm reference SH2022 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around SH2022.
- Fit SH2022 in the original orientation at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set and tighten fixings to the vehicle manufacturer values.
- Fill the axles and transfer case with the specified grade before first use.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference SH2022 is the axle set for For 1 to 2 ton light 4×4 utility, farm and mining transport vehicles at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set. Fill the axles and transfer case with the specified grade before first use.fitment is at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set; watch for axle noise, howling and rumble from worn ring-and-pinion or differential bearings; noise that changes with speed rather than engine rpm, often louder when cornering or under load; construction uses Steel (high-strength steel axle beams, housings, gears and shafts) for reference SH2022
Work on a axle set of this type is normally carried out by a trained technician; reference SH2022 is no exception.
The axle car repair sequence in the installation notes mirrors standard workshop practice for this driveline class.
Fitting crews handling axle cv joint repair should support the assembly on stands and mark the phasing before disassembly.
Fitting crews handling axle bearing puller should support the assembly on stands and mark the phasing before disassembly.
Fitting crews handling axle repair and service encinitas ca should support the assembly on stands and mark the phasing before disassembly.
The axle seal repair sequence in the installation notes mirrors standard workshop practice for this driveline class.
Renewing the hardware around axle bearing at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around axle kit trailer at the same time as the main assembly avoids a second teardown later.
Warranty for SH2022
Reference SH2022 (a axle set at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set) is supplied with a 24 Months warranty against manufacturing defects from the dispatch date.
Claims for SH2022 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. Damage from running the axles without the specified lubricant is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with any original equipment manufacturer referenced on this page.
Buyers comparing axle repair cost for this application usually confirm the reference number on the old unit first, then request a delivered quotation.
Frequently asked questions
Is this an original-equipment style part under reference SH2022?
How do I confirm SH2022 fits my vehicle?
What is the minimum order for SH2022?
How is pricing for SH2022 shown?
What is the warranty period for SH2022?
Are packaged weight and carton size published for SH2022?
Which numbers does SH2022/SH1020/SH-T2020, SH2022/SH1020/SH-T2020 cover?
Where does reference SH2022 fit on the vehicle?
What failure signs indicate I need SH2022?
Related parts and pages
Workshops ordering 4WD Front and Rear Axle Set (SH2022) usually check these pages next. fitment is at the Front axle, Rear axle and transfer case(centre), transmission – supplied as a complete set; construction uses Steel (high-strength steel axle beams, housings, gears and shafts); common wear shows as axle noise, howling and rumble from worn ring-and-pinion or differential bearings; noise that changes with speed rather than engine rpm, often louder when cornering or under load.
Support and ordering for SH2022
Send reference SH2022, quantity and destination and we will reply with availability, lead time and a delivered quotation for 4WD Front and Rear Axle Set.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for SH2022 are published on the site policy pages.
This unit is frequently shortlisted by parts departments researching axle on a car.
The notes above summarise what buyers typically need to know about axle for trailer before ordering.
The notes above summarise what buyers typically need to know about axle on car before ordering.
Catalogue descriptions that mention axle hub normally refer to the same driveline family documented here.
Catalogue descriptions that mention axle less trailer suspension normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about axle trailer before ordering.
This unit is frequently shortlisted by parts departments researching axle of car.
Reviews