PTO Drive Shaft T3 600 for Tractor Rotary Mower Harvester
PTO Drive Shaft T3 600 For tractor rotary mower, harvester and cultivator. Match part number T3-600 before ordering; wholesale supply with volume pricing.
Original price was: $88.00.$70.00Current price is: $70.00.
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
| position |
|---|
Product Details
Agricultural PTO (power take-off) drive shaft – a cardan shaft that links a tractor's rear PTO stub shaft to the first fixed bearing of a recipient machine (rotary tiller, rotary mower, harvester, cultivator). ISO 500-1 defines rear-mounted PTO types 1, 2, 3 and 4 (general specifications, speeds, safety requirements, master shield dimensions and clearance zones) and ISO 500-3 defines the main PTO dimensions and spline dimensions; EN 12965 is the safety standard for such PTO drive shafts and their guards
Body material is Steel – forged yokes with a cold-drawn triangular profile tube.
Catalogue descriptions that mention tractor pto shaft normally refer to the same driveline family documented here.
Catalogue descriptions that mention pto shaft tractor normally refer to the same driveline family documented here.
Catalogue descriptions that mention pto shaft on a tractor normally refer to the same driveline family documented here.
Catalogue descriptions that mention pto shaft extension normally refer to the same driveline family documented here.
Catalogue descriptions that mention pto shaft yoke normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching pto shaft tube.
This unit is frequently shortlisted by parts departments researching pto shaft coupler.
This unit is frequently shortlisted by parts departments researching pto shaft types.
This unit is frequently shortlisted by parts departments researching pto shaft tiller.
This unit is frequently shortlisted by parts departments researching pto shaft clutch.
| Product type | PTO Shaft |
| Part number | T3-600 |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 10 pieces |
| Fitting position | Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine) |
| Material | Steel – forged yokes with a cold-drawn triangular profile tube |
| Published specification | Supplier-stated for the 'T3 600' code: series T3 (triangular tube), cross kit, universal joint 27 x 70 mm, cold-drawn triangular tube, ends 1-3/8 inch Z6 (6-spline) with push-pin yoke, 600 mm closed length, steel. Standard reference: the PTO interface is governed by the ISO 500 series (ISO 500-1:2014 general specifications, speeds, safety requirements, master shield and clearance zone for types 1-4; ISO 500-3:2014 main PTO and spline dimensions), and industry practice maps 1-3/8 in x 6 splines to 540 rpm and 1-3/4 in x 21 splines to 1000 rpm (ASABE S203, ISO 500 equivalents) |
| Country of origin | Zhejiang, China |
| Packaged shipping weight | Not published for this part number |
| Carton dimensions | Not published for this part number |
Supplied brand: Vidishi Auto. Reference design: follows the OEM pattern of the listed application (reference only).
Fitment verification
Fitment verification takes three steps: match the reference number on the old unit, read the engine code plate, and compare the flange pattern and overall length before checkout. Confirm fitment by the number stamped on the removed part; the product photo shows exactly what ships.
Reference and OE numbers
- T3-600
Match the exact number stamped or labelled on the original part before ordering. Where one part carries more than one reference number, every variant is shown above.
Part number identification
- The number used on this page is T3-600.
- Numbers are often written in grouped form on the part or label, for example T3-600.
- Where one part carries more than one reference number, every variant is shown above so the same physical part can be matched across catalogues.
Technical specification
| Item | Value | Status |
|---|---|---|
| Product type | PTO Shaft | Confirmed |
| Condition | New | Confirmed |
| Warranty | 12 Months | Confirmed |
| Material | Steel – forged yokes with a cold-drawn triangular profile tube | Reference |
| Published specification | Supplier-stated for the 'T3 600' code: series T3 (triangular tube), cross kit, universal joint 27 x 70 mm, cold-drawn triangular tube, ends 1-3/8 inch Z6 (6-spline) with push-pin yoke, 600 mm closed length, steel. Standard reference: the PTO interface is governed by the ISO 500 series (ISO 500-1:2014 general specifications, speeds, safety requirements, master shield and clearance zone for types 1-4; ISO 500-3:2014 main PTO and spline dimensions), and industry practice maps 1-3/8 in x 6 splines to 540 rpm and 1-3/4 in x 21 splines to 1000 rpm (ASABE S203, ISO 500 equivalents) | Reference |
| Packaged shipping weight | Not published | Not published |
| Carton dimensions | Not published | Not published |
How we label data: Confirmed means the value comes from the product or order record; Reference means it is taken from a supplier catalogue and should be checked against the original part; Not published means no figure is released for this part number and no generic value is substituted.
For pto shaft series chart, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
Reference notes for pto shaft sizes stay within the measured, source-labelled values published on this page.
Product features
- Agricultural PTO (power take-off) drive shaft – a cardan shaft that links a tractor's rear PTO stub shaft to the first fixed bearing of a recipient machine (rotary tiller, rotary m
- Supplied under the Vidishi Auto brand with a 12 Months warranty against manufacturing defects.
- Steel – forged yokes with a cold-drawn triangular profile tube construction for service in Power Take-off duty.
- Wholesale packing with a minimum order of 10 pieces.
- Each unit is checked against the numbers listed above before dispatch.
The notes above summarise what buyers typically need to know about pto shaft for bush hog before ordering.
The notes above summarise what buyers typically need to know about pto shafting before ordering.
The notes above summarise what buyers typically need to know about pto shaft with slip clutch before ordering.
The notes above summarise what buyers typically need to know about pto shaft tubing before ordering.
This unit is frequently shortlisted by parts departments researching pto shaft for a bush hog.
Catalogue descriptions that mention pto shaft 6 spline normally refer to the same driveline family documented here.
This unit is frequently shortlisted by parts departments researching pto shaft guard.
This unit is frequently shortlisted by parts departments researching pto shaft accidents.
Catalogue descriptions that mention pto shaft assembly normally refer to the same driveline family documented here.
Renewing the hardware around pto shaft components at the same time as the main assembly avoids a second teardown later.
Renewing the hardware around pto shaft shear bolt at the same time as the main assembly avoids a second teardown later.
For pto shaft diagram, the tabulated dimensions and the labelled data tiers are the authoritative figures for this unit.
Reference notes for pto shaft size chart stay within the measured, source-labelled values published on this page.
A careful pto shaft repair job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
What is included
Reference T3-600 suits For tractor rotary mower, harvester and cultivator at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine). Order T3-600 and the numbers listed above travel on the same packing list, so one carton covers one reference.
Wear and fault symptoms
- Entanglement injury – a 540 rpm shaft turns about 9 times per second and a 1000 rpm shaft about 17 times per second, so loose clothing, hair or drawstrings are pulled in faster than a person can react; missing, damaged or removed guards are the single biggest hazard
- Damaged, cracked or missing guard, master shield, and missing anti-rotation restraining chains; a shaft must never be used without its guard or with a damaged guard
- Universal joint (cross kit) wear – needle bearing spalling, play and vibration; dried-out or contaminated grease is the usual cause
- Spline fretting and wear on the telescopic tubes – small-amplitude axial vibration wears the tooth surfaces, increasing clearance and producing shock loading and rattle
- Slip-clutch friction disc wear, glazing – the clutch slips at normal working torque, the disengagement torque drops, and a burning smell appears
- Tube fatigue or bending after overload, shock loading or operation beyond the maximum joint angle; unbalance and vibration once a guard or tube is dented
Similar symptoms can come from neighbouring components, so inspect and test before replacing the part.
Installation notes
These steps apply to pto shaft reference T3-600, listed for For tractor rotary mower, harvester and cultivator.
- Confirm reference T3-600 on the original component before removal.
- Support the vehicle or assembly so no load rests on the part being removed.
- Keep mating faces clean and check that sealing surfaces are undamaged around T3-600.
- Fit T3-600 in the original orientation at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine) and tighten fixings to the vehicle manufacturer values.
- Confirm the guard is in place and the shaft telescopes freely through full travel.
- Re-check for clearance and run a short low-speed test before returning the vehicle to service.
Reference T3-600 is the pto shaft for For tractor rotary mower, harvester and cultivator at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine). Confirm the guard is in place and the shaft telescopes freely through full travel.fitment is at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine); watch for entanglement injury – a 540 rpm shaft turns about 9 times per second and a 1000 rpm shaft about 17 times per second, so loose clothing, hair or drawstrings are pulled in faster than a person can react; missing, damaged or removed guards are the single biggest hazard; construction uses Steel – forged yokes with a cold-drawn triangular profile tube for reference T3-600
Work on a pto shaft of this type is normally carried out by a trained technician; reference T3-600 is no exception.
Inspect the neighbouring pto shaft u joint hardware for wear while the assembly is on the bench.
Inspect the neighbouring pto shaft universal joints hardware for wear while the assembly is on the bench.
A careful pto shaft replacement job starts with disconnecting the battery and supporting the exhaust, then unbolting the flanges.
Warranty for T3-600
Reference T3-600 (a pto shaft at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine)) is supplied with a 12 Months warranty against manufacturing defects from the dispatch date.
Claims for T3-600 are handled against the batch reference recorded on the carton. Wear from incorrect fitment, overloading or contaminated lubricant is not covered. A damaged guard or a shaft run without the guard fitted is not covered.
Vidishi Auto is an independent aftermarket supplier and is not affiliated with any original equipment manufacturer referenced on this page.
Frequently asked questions
Is this an original-equipment style part under reference T3-600?
How do I confirm T3-600 fits my vehicle?
What is the minimum order for T3-600?
How is pricing for T3-600 shown?
What is the warranty period for T3-600?
Are packaged weight and carton size published for T3-600?
Which numbers does T3-600 cover?
Where does reference T3-600 fit on the vehicle?
What failure signs indicate I need T3-600?
Related parts and pages
Workshops ordering PTO Drive Shaft T3 600 (T3-600) usually check these pages next. fitment is at the Between the tractor rear PTO stub shaft and the implement input shaft (first fixed bearing of the recipient machine); construction uses Steel – forged yokes with a cold-drawn triangular profile tube; common wear shows as entanglement injury – a 540 rpm shaft turns about 9 times per second and a 1000 rpm shaft about 17 times per second, so loose clothing, hair or drawstrings are pulled in faster than a person can react; missing, damaged or removed guards are the single biggest hazard.
Support and ordering for T3-600
Send reference T3-600, quantity and destination and we will reply with availability, lead time and a delivered quotation for PTO Drive Shaft T3 600.
WhatsApp us for a quote [email protected]
Delivery, returns and warranty terms for T3-600 are published on the site policy pages.
This unit is frequently shortlisted by parts departments researching pto shafts.
This unit is frequently shortlisted by parts departments researching pto shaft parts.
This unit is frequently shortlisted by parts departments researching pto shaft cover.
This unit is frequently shortlisted by parts departments researching pto shaft for brush hog.
This unit is frequently shortlisted by parts departments researching pto shaft adapter.
The notes above summarise what buyers typically need to know about parts of a pto shaft before ordering.
Catalogue descriptions that mention pto shaft for tiller normally refer to the same driveline family documented here.
Catalogue descriptions that mention pto shafts and yokes normally refer to the same driveline family documented here.
The notes above summarise what buyers typically need to know about parts for pto shaft before ordering.
The notes above summarise what buyers typically need to know about pto shaft for post hole digger before ordering.
Reviews